Kenmore 11076902692 gas dryer Parts

Your Kenmore dryer’s model number is printed on the model and serial number plate; on model 11076902692, it’s the number you’ll use to match the correct parts, features, and specifications in the 11076902692 owner’s manual. Record both the model and serial numbers for future service.

Where to look for the model number plate

On most Kenmore dryers, the model/serial plate is in one of these common spots:

• Inside the door opening (on the door frame or cabinet front)
• On the back panel of the dryer cabinet
• Near the lint screen housing (depending on the design)
• Along the lower front edge behind the toe panel area

How to read the number (and why it helps)

Kenmore model numbers are typically a long string of digits. The full model number is what matters for parts lookup and troubleshooting.

• Use the entire model number (not just the first 3 digits)
• Write down the serial number too; it helps identify production details
• Match the model number when ordering common wear items like a thermal fuse, igniter, or drum support rollers

Quick guide

What you find	What to do with it	Why it matters
Model number	Use it to select exact diagrams and parts	Prevents ordering the wrong part revision
Serial number	Keep it with your purchase info	Helps with service and identification
Feature sheet info (if included)	Compare cycles and options	Confirms control panel and cycle differences

Why it matters

Kenmore dryers share similar styling across many series, but internal components can differ. Using the correct model number helps us point you to the right gas dryer parts, wiring, and operating instructions so repairs go smoothly.

Last updated: February 2026

To troubleshoot your Kenmore gas dryer 11076902692, start by matching the symptom (no start, no heat, long dry times, or noise) to a quick set of checks. Most issues trace to airflow restrictions, a blown thermal fuse, or ignition system parts.

Step 1: Identify the symptom and do the fast checks

• Won’t start: confirm power, door fully closed, and cycle selected; try the start switch
• Runs but no heat: check for overheating history and airflow restriction first
• Long dry times: clean lint screen, check vent for kinks or blockage
• Loud squeal/thump: suspect belt path wear parts (idler pulley, drum seal)

Step 2: Common fixes by symptom

Symptom	What to check first	Likely part for this model
Won’t start	Door switch and start switch	Dryer push-to-start switch WP3395382
Runs, no heat (gas)	Igniter glow and burner ignition	Dryer igniter 279311, dryer gas valve coil kit 279834
Stops heating, then heats again later	Weak gas coils	Dryer gas valve coil kit 279834
Long dry times	Airflow and blower wheel	Dryer blower wheel WP697772
No heat after overheating event	Thermal fuse open	Dryer thermal fuse WP3390719

Step 3: Safe, practical testing tips

• Unplug the dryer before accessing internal parts.
• If you’re checking continuity, use a meter and test with wires removed from the part.
• If the thermal fuse is blown, correct the venting problem before replacing it.

A good walkthrough for electrical checks is how to use a multimeter to test electrical parts video. For model-specific disassembly, wiring, and diagnostics, use the 11076902692 owner's manual.

Why it matters

Troubleshooting by symptom prevents unnecessary part swaps and helps you fix the root cause (especially venting problems that repeatedly blow fuses or overheat thermostats).

Last updated: March 2026

A Kenmore gas dryer like model 11076902692 typically lasts 13 years with normal household use and regular vent cleaning. The biggest factors are airflow (lint and venting), heat stress on thermostats, and wear items like the idler pulley and drum seal.

What affects lifespan most

• Keeping the lint screen and exhaust vent clear (overheating shortens part life)
• Avoiding overloading (reduces strain on the drive motor and drum support)
• Using the right cycle and heat setting for the load
• Replacing worn wear parts early (noise and drag accelerate failures)
• Fixing heat issues quickly (protects the thermal fuse and thermostats)

Common wear parts over time

These parts often need attention as the dryer ages:

Symptom	Commonly involved part	Example part for this model
Squealing or thumping	Idler pulley, drum seal	Dryer idler pulley 279640, dryer drum seal 280114
Runs but no heat	Igniter, gas valve coils, thermal fuse	Dryer igniter 279311, dryer gas valve coil kit 279834, dryer thermal fuse WP3390719
Long dry times	Blower wheel, vent restriction	Dryer blower wheel WP697772

Why it matters

Knowing the expected lifespan helps you decide whether to repair or refresh key components. On a 13-year-old gas dryer, restoring airflow and replacing a few wear parts often brings drying performance back to normal.

For model-specific maintenance and safety steps, follow the 11076902692 owner's manual.

Last updated: March 2026