Kenmore 11064932200 electric dryer Parts

The most common issues we see with the Kenmore 11064932200 electric dryer are no heat, long dry times, drum not turning, unusual noise, and the dryer not starting. These problems usually trace to airflow restrictions, a failed heating circuit component, or worn drum support parts; use the 11064932200 owner's manual for model-specific checks.

• No heat or weak heat: failed heater circuit parts such as the dryer element 279838, high-limit thermostat, operating thermostat, or thermal cut-off
• Long dry times: clogged lint path or venting, restricted blower housing, or a failing blower wheel
• Won’t start: door switch not closing, push-to-start switch issue, timer problem, or motor problem
• Drum won’t tumble: broken belt, worn idler pulley, or seized drum rollers (often serviced as a kit)
• Squealing, thumping, or rumbling: worn drum support components (rollers, shafts, bearing surfaces)

1. Clean the lint screen and confirm strong airflow at the outside vent.
2. Verify the dryer is getting full power (electric dryers typically need 240 VAC to heat).
3. Listen for the motor: hum with no tumble often points to a belt or drum support bind.
4. If the dryer runs but won’t heat, inspect the heater circuit and safety fuses.

On the 11064932200, airflow problems can overheat the heater housing and repeatedly trip safety devices, causing “runs but no heat” and premature part failures. Fixing venting and lint buildup often prevents repeat breakdowns.

Last updated: March 2026

A Kenmore electric dryer like model 11064932200 typically lasts 13 years with normal household use. Regular vent cleaning, not overloading the drum, and replacing wear items like the belt and rollers on time helps you reach that lifespan.

Most electric dryers fall into a predictable range; performance and safety depend heavily on airflow and drum support parts.

• Vent restriction is the biggest life-shortener (overheats the heater and thermostats)
• Overloading strains the motor, belt, and drum rollers
• Lint buildup reduces airflow and increases heat stress
• Moisture sensor issues can cause long cycles and extra wear
• Worn drum support parts create noise and can damage the drum

Use this as a simple baseline for 11064932200.

If the dryer still heats and tumbles well after replacing wear parts, it often has years left.

• Squealing or thumping: consider a rebuild using the dryer repair kit 4392065
• No tumble: a broken belt such as the dryer drum belt 341241 is common
• No heat or overheating symptoms: inspect heating and safety components; the dryer thermal cut-off fuse kit 279816 is a frequent fix

Knowing the expected lifespan helps you decide whether to maintain, repair, or replace. On this Kenmore electric dryer, airflow and drum support wear are the two biggest drivers of reliability and drying performance.

For model-specific operating and care guidance, follow the owner's manual.

Last updated: March 2026

The Kenmore 11064932200 electric dryer is a 29-inch wide dryer; its exact drum capacity (in cubic feet) is not listed in the provided 11064932200 owner's manual. For most 29-inch Kenmore electric dryers of this style, capacity is typically in the 6.5 to 7.5 cu. ft. range.

We recommend checking the model and feature details tied to your specific unit (capacity can vary by series even within 29-inch platforms).

• Check the specifications section in the 11064932200 owner's manual
• Look for a rating label or product information tag (often near the door opening)
• Compare your control panel features (timed dry, automatic cycles, options) to the manual’s feature list
• If you are matching parts for performance issues (long dry times, overheating), confirm venting and airflow first

Capacity affects load size, drying time, and airflow. Overloading a dryer can reduce tumbling action and restrict air movement, which can lead to longer cycles and higher heat stress on components like thermostats and fuses.

If you are troubleshooting heat or drying performance (often confused with “capacity” problems), these model-matched parts are commonly involved:

• Dryer thermal cut-off fuse kit 279816 (opens if overheating occurs)
• Dryer operating thermostat WP3387134 (helps regulate drum temperature)
• Dryer blower wheel WP694089 (moves air through the drum and vent)

Last updated: January 2026