Craftsman 247250000 riding mower Parts

Common problems we see on the Craftsman 247250000 riding mower include starting or no-crank issues (often tied to safety interlocks), poor cutting quality from dull or damaged blades, belt and pulley wear that causes slipping or weak drive, and deck or frame corrosion over time. Use the owner's manual for model-specific operating and maintenance checks.

• Won’t start or won’t crank: seat/brake/PTO safety switch out of adjustment, weak battery, loose wiring
• Engine runs rough or lacks power: dirty air filter, old fuel, carburetor varnish, fouled spark plug
• Mower won’t move or slips under load: worn ground drive belt, weak idler tension, damaged pulley
• Cuts uneven or leaves strips: dull blade, bent blade, deck not level, worn mandrel bearings
• Excess vibration or noise: loose blade hardware, damaged mandrel, debris wrapped around spindles
• Poor traction on hills: tire pressure mismatch, wet grass, unsafe slope operation

1. Park on level ground, set parking brake, remove key, and let hot parts cool.
2. Confirm PTO is OFF and you are fully seated; interlocks must be satisfied to crank.
3. Inspect belts for glazing, cracks, or fraying; check pulley grooves for damage.
4. Check blade condition and tightness; keep blades sharp for best results.
5. Look for rust-through or grooves in the deck shell, especially near discharge areas.

Many “big” mower problems start as small wear items. A slipping belt, dull blade, or misadjusted interlock can reduce cut quality, strain the drivetrain, and make the tractor feel unreliable.

The manual emphasizes slow, gradual movements on slopes, avoiding wet grass, and not turning on slopes unless necessary. Following those guidelines prevents loss of traction and tip-over risk.

Last updated: February 2026

Most riding lawn mowers, including the Craftsman 247250000, last 10 to 15 years with normal homeowner use and consistent maintenance. In engine hours, many homeowners see roughly 300 to 1,000+ hours depending on terrain, mowing habits, storage, and how closely service intervals are followed in the owner's manual.

A mower’s “life” is usually measured in engine hours and overall condition (deck, steering, drive system), not just calendar years.

• Light-duty use: 300 to 500 hours
• Typical homeowner use: 500 to 1,000 hours
• Well-maintained, heavier-duty use: 1,000+ hours
• Poor maintenance or harsh conditions (dust, steep slopes, heavy towing): shorter life

These actions do the most to extend the life of a Craftsman riding mower engine, deck, and ground drive.

• Change engine oil and filter on schedule
• Keep the air filter clean (dust is an engine killer)
• Keep blades sharp and balanced; replace worn blades
• Keep belts properly tensioned and replace when cracked or glazed
• Clean grass buildup from the deck to reduce corrosion and overheating
• Store dry and protected during off-season storage

A mower that is maintained to spec cuts cleaner, runs cooler, and puts less strain on the ground drive belt, pulleys, and mandrel assemblies. That reduces breakdowns and helps you avoid “cascade” failures where one worn part damages others.

Last updated: February 2026

Craftsman model 247250000 is a specific riding mower model identifier, but it is not tied to one single “model year” the way cars are. The most reliable way to pinpoint when your exact mower was built is to use the manufacturing date information tied to the serial number and the identification label locations shown in the owner's manual.

We use the mower’s ID label and serial number because retailers and manufacturers often sell the same model number across multiple seasons.

• Look for the product identification label under the seat pan or near the frame/seat pivot bracket area.
• Write down the model number (247250000) and the serial number exactly as shown.
• Compare the serial number format to the identification guidance in the manual.
• If your mower has an engine model/type/code tag (on the engine shroud or valve cover area), record that too.
• Use the date you find to choose the correct parts list and diagrams for your exact configuration.

The documentation we have for this mower is organized around Craftsman model 247.25000 parts breakdowns (for example, frame, steering, deck lift, and deck spindle assemblies). That confirms the model family and parts structure, but production years can still vary by serial number and supplier changes.

When you are comparing diagrams or troubleshooting, these parts are commonly associated with this model’s assemblies:

• Trans asm 618P09929 (transmission assembly)
• Lawn tractor interlock switch 725-04363 (safety start/run circuit)
• Mtd lawn tractor steering shaft pinion gear 717-1554 (steering gear)
• Mtd lawn & garden equipment cotter pin, 1/4- to 5/16-in 714-04040 (linkage retention)

Getting the correct build date and configuration prevents ordering the wrong belt, pulley, steering, or transmission parts. Small mid-production changes are common on riding mowers, even when the model number stays the same.

Last updated: February 2026

On the Craftsman riding mower model 247250000, the model number is typically printed on a product ID label located on the frame or under the seat area; it may also appear on or near the cutting deck depending on how the mower is configured. For label location diagrams and ID formats, use the 247250000 operator's manual.

We recommend checking these spots in order because they are the most common and easiest to access:

• Under the seat: lift the seat and look on the seat pan or the frame directly beneath it
• Rear frame area: near the hitch plate or between the rear wheels
• Right or left side of the frame: along the chassis rail near the engine compartment
• Cutting deck: on the deck shell, usually near the rear or left side
• Engine area: on the engine shroud or near the starter housing (engine model is separate from mower model)

The ID label usually includes multiple identifiers. Record all of these so we can match parts correctly.

• Wipe the label with a damp rag and mild detergent; avoid harsh solvents
• Use a flashlight at an angle to make faded printing easier to see
• Take a close-up photo and zoom in
• If the label is missing, compare your mower’s deck size and controls to the diagrams in the 247250000 installation guide

Craftsman riding mowers often share similar frames and decks across multiple model numbers. Using the exact model number (and serial, when available) prevents ordering the wrong belt, mandrel assembly, or interlock switch for your mower.

Last updated: February 2026