Kenmore Elite 66512769K310 dishwasher Parts

Yes. You can still get replacement parts for Kenmore dishwashers, including the Kenmore Elite 66512769K310. The key is matching parts to your exact model number so items like rack hardware, pumps, and valves fit and function correctly; use the parts list for this model and confirm details in the 66512769K310 owner's manual.

How to make sure you order the right part

• Use the full model number 66512769K310 (from the rating label on the tub frame or door edge).
• Match by part ID (not just a description like “roller” or “pump”).
• Compare the symptom to the part’s job (drain issue vs. fill issue vs. rack issue).
• Replace related wear items in pairs when it makes sense (for example, rack rollers on both sides).
• Follow installation and safety steps in the installation guide when removing the dishwasher or working around wiring and water lines.

Common Kenmore Elite 66512769K310 parts customers replace

Here are examples of parts available for this model that cover frequent repairs:

Problem you notice	Part that often fixes it	Example part for this model
Lower rack won’t roll smoothly	Lower rack roller/wheel assembly	Dishwasher dishrack roller assembly, lower WPW10195417
Dishwasher will not drain	Drain pump or drain hose	Dishwasher drain pump WPW10531320 or dishwasher drain hose 8269144A
Dishwasher won’t fill or fills slowly	Water inlet valve	Dishwasher water inlet valve W11175771
Poor drying or water not heating	Heater/heating element	Dishwasher heater W10703867

Why it matters

Kenmore dishwashers are built with model-specific components (rack adjusters, pumps, control parts, seals). Ordering by model number helps prevent leaks, fit issues, and repeat repairs caused by “close enough” parts.

Where to buy

We recommend ordering directly from the parts list for Kenmore Elite 66512769K310, or searching by model number on Sears PartsDirect if you are shopping for additional Kenmore dishwasher parts.

Last updated: February 2026

For Kenmore Elite dishwashers, including model 66512769K310, we find the model number on the dishwasher’s identification label, typically located along the inside edge of the door or on the tub frame just inside the door opening. Use the exact model number to match parts and installation details.

Where to look on your dishwasher

Check these common label locations first:

• Along the top or side edge of the door when you open it
• On the tub frame (the rim around the opening)
• On the left or right inner door panel area
• Behind the lower access panel (toe-kick) on some installations
• On the side of the unit (visible after removing the toe-kick)

What the label looks like

Most Kenmore dishwasher labels include a few key fields. Here is what to copy down:

Label item	What to record	Why it matters
Model number	Example: 66512769K310	Ensures correct part fit and diagrams
Serial number	Letters and numbers	Helps identify production range
Electrical rating	Volts/amps	Useful for safe service checks

Why it matters for parts and repairs

Kenmore model numbers that start with 665 are commonly built on a Whirlpool platform, and small design changes can affect fit for items like rack hardware, pumps, and controls. Using the full model number helps us match the right replacement part the first time.

Helpful next steps

Once you find the model number:

• Compare it character-for-character to 66512769K310
• Use the model number to select parts like the dishwasher water inlet valve W11175771 or dishwasher drain pump WPW10531320 when troubleshooting fill or drain problems
• Use the installation guide for access panel removal, cabinet opening clearances, and safe installation requirements
• If you are shopping beyond the parts shown for this model, search by model number on Sears PartsDirect

Last updated: February 2026

Yes; repairing your Kenmore Elite dishwasher model 66512769K310 is worth it when the tub is sound and the failure is a single serviceable part (drain, fill, heat, or rack hardware). Those repairs typically cost far less than replacing the dishwasher.

Quick decision checklist

Use these checkpoints before buying parts:

• If the tub is cracked or rusted through, replace the dishwasher.
• If the problem is one failed component, repair is the better value.
• If the repair total is under about half the price of a comparable new unit, repair.
• If you have multiple major failures at once (leak plus no heat plus no drain), replace.
• If the dishwasher is under 10 years old, repair.

Repairs that are usually worth it on 66512769K310

These common issues are typically straightforward:

• Not draining: check the drain path; replace the dishwasher drain pump WPW10531320 if the pump is dead.
• Not filling or filling slowly: replace the dishwasher water inlet valve W11175771 if the valve is weak.
• Poor drying or no heat: test the heater circuit; replace the dishwasher heater W10703867 if it is open.
• Rack problems: rollers and adjusters are economical fixes (example: dishrack adjuster kit W10712394).

Repair vs replace at a glance

Situation	Best choice
One part failure (drain, fill, heat, rack)	Repair
Multiple major failures at once	Replace
Tub damage (crack, rust-through)	Replace
You want a quieter or more efficient upgrade	Replace

Why it matters

This style of Kenmore Elite dishwasher uses longer cycles and pauses for cleaning; when the fill valve, heater, or drain system is weak, performance drops quickly. Replacing the right part restores normal wash action and drying.

Basics to confirm first

These quick checks prevent unnecessary parts replacement:

• Door closes and latches tightly
• Cycle is set correctly to start
• Water supply is turned on
• Unit is level and secured (see the installation guide)

You can order model-matched parts from the parts list for 66512769K310, or search by model number on Sears PartsDirect.

Last updated: February 2026