Installation guide
Owner’s manual
Error Codes
How do I find the part number for my dryer?
For your Kenmore electric dryer model 11064992300, we match the correct replacement part by using the model number and then locating the part on the parts diagram and parts list. The model and serial label is located at the top inside the dryer door well (inside the door opening). See the 11064992300 owner's manual.
Where to look on the dryer
The fastest way to get the right part number is to confirm the model number from the appliance label first.
- Open the dryer door.
- Look along the top inside edge of the door opening (door well).
- Find the model number and serial number on the label.
- Write them down exactly (all digits matter).
- Use that model number to identify the correct part on the parts list.
How we identify the correct part number (the reliable method)
Once you have the model number, use the parts diagram to pinpoint the exact component and its identifier.
| What you have | What it tells you | What to do next |
|---|---|---|
| Model number (example: 11064992300) | Which version of the dryer you own | Use it to open the correct parts list |
| Part name (example: heating element) | Which system you are repairing | Match the name to the diagram location |
| Part ID (example: WP3387747) | The exact replacement to order | Order by the part ID |
Common parts customers look up on this model
If you are troubleshooting heat, noise, or a no-start issue, these are frequent replacements for model 11064992300:
- Dryer heating element WP3387747 (no heat, weak heat)
- Dryer door switch WP3406107 (won’t start when door is closed)
- Support WPW10314173 (thumping or squealing as the drum turns)
- Dryer idler pulley 279640 (squeal, belt not tensioned)
Why it matters
Kenmore model numbers often have multiple revisions that use different parts. Confirming the model number from the door-well label prevents ordering a look-alike part that will not fit, especially for electrical items like a heating element or timer.
Last updated: February 2026
How do I tell what model my Kenmore dryer is?
Your Kenmore dryer’s model number is printed on the model and serial number label; on model 11064992300, it’s located at the top inside the dryer door well. Once you have that full number, we can match the correct parts, wiring, and installation requirements.
Where to look on the dryer
Check these common label locations (start with the door opening):
- Top inside the dryer door well (most common for Kenmore 110-series)
- Inside the door opening on the cabinet frame
- Back panel of the dryer cabinet
- Near the lint screen housing (varies by design)
What the model number looks like (and why it matters)
Kenmore model numbers are usually a long string of numbers (sometimes with a prefix). For this dryer, the full model is 11064992300. Using the complete model number helps us select the right heating, drum, and control parts.
| What you’re reading | Example | What it’s used for |
|---|---|---|
| Model number | 11064992300 | Finding correct parts diagrams and compatibility |
| Serial number | (varies) | Production run details for service reference |
| Purchase date | (your record) | Warranty and ownership records |
Tips to avoid common mix-ups
- Write down the full model number exactly as shown (all digits)
- Record the serial number too; it’s often on the same label
- If the label is worn, use a flashlight and take a close-up photo for clarity
Why it matters
Kenmore dryers can look similar across series, but parts like the heating element, door switch, and drum support system can differ by model. Matching the exact model number prevents ordering the wrong replacement part.
For the official label location and how to record it, use the 11064992300 owner’s manual.
Last updated: February 2026
What size is a Kenmore Model 11064992300?
Most Kenmore electric dryers like model 11064992300 are full-size units that measure about 27 inches wide, 27 to 29 inches deep, and 43 to 44 inches tall. For the exact cabinet dimensions and clearance requirements for your specific dryer, use the 11064992300 owner's manual.
Typical dimensions and what to plan for
These are the measurements we see most often for a standard 27-inch Kenmore (Whirlpool-built) electric dryer.
- Width: ~27 in.
- Height: ~43 to 44 in.
- Depth (cabinet): ~27 to 29 in.
- Depth (with door open): often 45 in. or more
- Recommended space behind dryer: enough for the vent and power cord without kinking
Clearance and venting space (often the real “size” issue)
Even when the cabinet is standard size, tight laundry closets usually fail because the vent path needs room. The installation guidance for this model family emphasizes keeping venting within allowed lengths and using the straightest run possible.
Vent length quick reference
| Vent type | 0 elbows, box/louvered hood | 0 elbows, angled hood |
|---|---|---|
| Rigid metal | 64 ft (20 m) | 58 ft (17.7 m) |
| Flexible metal | 36 ft (11 m) | 28 ft (8.5 m) |
- Side or bottom exhaust adds an internal 90° turn; count that as one extra elbow.
- Avoid screws or duct tape inside the duct; use clamps to seal joints.
- Longer or kinked venting increases drying time and energy use.
Why it matters
Knowing the cabinet size helps you confirm fit, but planning for door swing, vent routing, and electrical connection space prevents overheating, poor airflow, and long dry times.
Last updated: February 2026
