Kenmore 11076955110 electric dryer Parts

Your Kenmore dryer’s model number is printed on the appliance’s identification label; once you find it, match the full number exactly (for example, 11076955110) to look up the correct parts, diagrams, and troubleshooting info for your specific dryer.

Check these common locations on Kenmore electric dryers like model 11076955110:

• Inside the dryer door opening (on the door frame or cabinet front)
• On the back panel of the dryer cabinet
• Along the inside edge of the door itself
• Near the lint screen housing area (you may need to open the door and look around the opening)

Kenmore model numbers are usually a long string of numbers. Copy it exactly as shown on the label.

Even one missing digit can point to a different dryer design.

• Use the full model number, not just the first three digits (like “110”)
• Match every digit in order; do not add spaces or punctuation
• If the label is worn, take a clear photo and zoom in to read it
• When replacing common wear items, confirm fit by model before buying

Kenmore dryers share many similar-looking parts across model families, but belt routing, motor style, and door hardware can differ. Using the exact model number helps us show the right replacement parts, such as the drum belt 341241 when your dryer drum will not turn.

Last updated: February 2026

Common problems on Kenmore electric dryers like model 11076955110 include no heat, long dry times, the drum not turning, and squealing or thumping noises. Most of these issues trace back to airflow restrictions (lint and venting) or normal wear on drive parts such as the belt, idler pulley, and motor.

• Dryer runs but won’t heat: failed thermostat, heating circuit issue, or restricted airflow causing overheating
• Long drying times: clogged lint screen, blocked vent duct, crushed flex vent, or a weak blower wheel
• Drum won’t turn: broken belt, seized idler pulley, or a failing drive motor
• Loud squeal, chirp, or rumble: worn pulley, belt wear, or drum support wear
• Stops mid-cycle: overheating from poor airflow, or an intermittent motor problem

• Clean the lint screen before every load; wash it with mild soap if fabric softener residue is present.
• Check airflow at the outside vent hood; it should be strong and steady.
• Inspect the vent path for kinks, crushing, or heavy lint buildup.
• Run a timed dry cycle; compare heat and airflow to an “empty drum” test.
• Listen for changes: a new squeal often points to the idler pulley or belt path.

Airflow problems do more than slow drying; they raise operating temperatures, which increases wear on thermostats, the motor, and moving parts. Keeping the venting clear and fixing early belt or pulley noise helps prevent bigger breakdowns.

For electronic display issues on Kenmore dryers, use our Kenmore 110 series electronic control model dryer error codes reference to match the code to the most likely cause.

Last updated: February 2026

Most Kenmore electric dryers like model 11076955110 are full-size, 27-inch class machines. For planning space, we use a typical footprint of about 27 inches wide, 27 to 29 inches deep, and 43 to 44 inches tall; allow extra room behind for the vent and cord.

Because no model-specific dimension sheet is provided here, these are the common ranges for a standard 27-inch Kenmore (Whirlpool-built) electric dryer.

• Width: ~27 inches
• Depth (cabinet): ~27 to 29 inches
• Height: ~43 to 44 inches
• Door swing clearance: plan several extra inches in front
• Rear clearance: leave space for venting and the power cord

• Measure the tightest point of the path (doorways, turns, laundry closet opening).
• Measure the installed depth from the wall to the front of the door (includes vent and cord space).
• Confirm the dryer sits level; replace a damaged leveling leg such as the foot 49621 if needed.
• If the dryer is noisy or hard to turn by hand, inspect the drum belt 341241 and idler pulley.

Correct sizing prevents a kinked exhaust vent (slow drying, higher heat), avoids door clearance problems, and helps you choose compatible replacement parts for Kenmore model 11076955110.

Last updated: February 2026