Owner’s manual
View engine
What model number is the Craftsman 917288525?
For this Craftsman riding lawn tractor, the model number you’ll use for parts lookup is 917288525. You can confirm it on the tractor’s identification sticker (commonly under the seat) and in the 917288525 operator’s manual, where the model is shown in the “Model No.” area.
Where to find the model number on the tractor
Check these common locations on Craftsman front-engine lawn tractors:
- Under the seat on the frame or fender pan
- Near the rear wheel area on the frame
- Under the hood area on the chassis (less common)
- Inside the engine compartment on a label (varies by engine)
Use the full model number (and why it matters)
When ordering parts for model 917288525, we recommend using the complete model number exactly as printed. For some repairs, you may also need the engine’s model and type/spec numbers (listed on the engine label) to match tune-up and fuel system parts.
Quick ID checklist
| What to record | Example format | Used for |
|---|---|---|
| Tractor model number | 917288525 | Deck, steering, chassis, belts |
| Engine model/type/spec | Varies by engine | Filters, carburetor, ignition parts |
| Deck size | 46-in deck | Blades, mandrels, blade belt |
Related parts that depend on correct model ID
Once you confirm 917288525, parts selection is much more accurate for items like:
- Mower deck blades (deck size and spindle style must match)
- Blade drive belt routing and length (deck-specific)
- Steering linkage components
- Electrical starting components
If you’re troubleshooting a no-start or click-no-crank symptom, the lawn tractor starter solenoid 582042802 is one of the common electrical parts tied to the correct tractor model.
Why it matters
Craftsman tractors in the 917-series can look similar but use different deck assemblies, belt lengths, and steering parts. Matching the exact 917288525 model number prevents wrong-part returns and speeds up repairs.
Last updated: February 2026
What model number is the Craftsman 917288525?
The model number for this Craftsman front-engine lawn tractor is 917288525. Use that full number when ordering parts or looking up diagrams; it identifies the exact tractor version, which matters for belts, blades, steering parts, and electrical components. See the 917288525 operator's manual for the model identification section and specifications.
Where to find the model number on the tractor
We recommend checking the manufacturer’s label on the tractor (commonly under the seat area or on the frame near the seat). Match the label exactly, including all digits.
- Look for a label that says Model No.
- Write down the full model number: 917288525
- Also record the engine model/type/spec numbers (useful for engine-specific parts)
- If the label is dirty or faded, clean it gently and use a flashlight
- Keep the number with your maintenance records for faster parts lookup
Why the exact model number matters
Craftsman tractors often share a series name (for example, “YT” style naming), but parts can vary by deck size, transmission, and steering configuration. Using the exact model number prevents ordering the wrong drive belt, blade, or steering linkage.
| What you’re doing | Use this identifier | Why it helps |
|---|---|---|
| Ordering tractor chassis or deck parts | 917288525 | Matches the correct diagrams and revisions |
| Ordering engine parts (tune-up items) | Engine model/type/spec | Engines vary even within the same tractor model |
| Troubleshooting operation/maintenance | Manual for 917288525 | Gives correct procedures and intervals |
Related parts you might match by model
If you are shopping for common wear items, the model number ensures the correct fit for deck and drive components.
- Lawn tractor blade drive belt 584453101 (deck belt)
- Lawn tractor drive belt 532125907 (ground drive belt)
- Husqvarna lawn tractor 46-in deck high-lift blade 532405380 (blade)
Why it matters
A one-digit difference in a Craftsman 917-series model can change belt length, deck hardware, or steering geometry. Confirming 917288525 up front saves time and avoids returns.
Last updated: February 2026
What size belt does a 42-in Craftsman lawn mower take?
A 42-inch Craftsman mower deck belt size varies by the exact tractor and deck design; the reliable way to get the right belt is to match your model number and follow the belt routing shown in the 917288525 owner's manual. For Craftsman model 917288525, the parts list for this model includes a blade drive belt option: Husqvarna lawn tractor blade drive belt 584453101.
Get the correct belt for your Craftsman tractor
Use these checks so you order the right belt the first time:
- Confirm the full model number on the frame tag (for this tractor: 917288525).
- Identify which belt you need: blade drive (deck) belt or ground drive belt.
- Compare belt routing and pulley locations (mandrel pulleys, idler pulleys, belt guides).
- Replace any frozen or noisy idler pulleys at the same time to prevent rapid belt wear.
- After installation, verify the belt sits fully in every pulley groove before mowing.
Blade drive belt vs ground drive belt (quick comparison)
| Belt type | What it drives | Common symptom when worn | Model 917288525 example part |
|---|---|---|---|
| Blade drive (deck) belt | Mower blades | Blades do not rotate, squeal, uneven cut | Husqvarna lawn tractor blade drive belt 584453101 |
| Ground drive belt | Rear wheels/transmission | Tractor slips or will not move | Lawn tractor drive belt 532125907 |
What the manual procedure focuses on
The manual steps for this Craftsman tractor focus on safe deck removal and correct routing around mandrel and idler pulleys.
- Set parking brake; disengage the attachment clutch
- Remove key; disconnect spark plug wire
- Remove the mower deck
- Route the belt around mandrel pulleys and idlers; keep it inside all belt guides
Why it matters
A belt that is the wrong length or routed incorrectly slips, jumps off, and can overload idler pulleys and mandrel bearings. Matching the model and routing keeps blade engagement smooth and cut quality consistent.
Last updated: February 2026
What size is 592855201?
For Craftsman tractor model 917288525, part number 592855201 is not one of the manufacturer-listed parts in our model-specific parts list; the correct “size” depends on what system you are repairing (ground drive vs. mower deck). Use the belt and routing information in the 917288525 owner's manual to identify the exact belt specification for your tractor.
How we match the correct belt size on model 917288525
Drive belts are identified by application first, then by width and effective length. Use these checks to match the right belt:
- Confirm whether you need the ground drive belt (tractor moves) or the blade drive belt (deck spins).
- Look for the part number printed on the old belt; that is the fastest match.
- Compare belt width (commonly 1/2-inch on many Craftsman/Husqvarna-built tractors).
- Inspect idler pulleys and tensioners; worn parts can make a correct belt seem loose.
- Verify routing using the diagram in the manual before ordering.
Belt sizes we can confirm from the model 917288525 parts list
These are the belt specifications shown for belts available for this model:
| Belt on this model | Part ID | Listed size |
|---|---|---|
| Lawn tractor drive belt | 532125907 | 1/2 x 90-in |
| Husqvarna lawn tractor blade drive belt | 584453101 | 1/2 x 105-11/16-in |
If 592855201 is printed on your belt, it is commonly a cross-reference number used by some sellers; matching by application and measured size prevents ordering the wrong belt.
Why it matters
A belt that is even slightly off in effective length can slip, squeal, or fail early. Confirming the correct belt type and routing for Craftsman 917288525 protects pulleys, idlers, and mandrels and restores proper drive and blade engagement.
Last updated: February 2026
