Whirlpool WGD94HEXW1 27" gas dryer Parts

Yes. For your Whirlpool WGD94HEXW1 27-inch gas dryer, searching by model number is the fastest way to match parts to the exact drum, burner, and control configuration used in your dryer. We recommend confirming the full model and serial number, then using the parts list and diagrams in the WGD94HEXW1 owner's manual.

How to search parts by model number (best method)

• Find the model/serial tag on the dryer (commonly inside the door opening or on the cabinet frame).
• Enter the full model number exactly as shown: WGD94HEXW1.
• Use the model’s parts diagrams to identify the correct section (drum, blower, burner, controls).
• Match by part name and part ID to avoid look-alike parts.
• If you are ordering for a repair, use Factory Specified Parts (FSP) style replacements for best fit and performance.

What you typically need to identify the right part

What to match	Where you’ll see it	Why it helps
Model number	Model/serial tag	Ensures correct fit for your exact dryer
Part name	Parts list/diagram	Confirms you are in the right system (heat, drum, airflow)
Part ID	Part listing	Prevents ordering the wrong revision
Symptom	Your dryer behavior	Narrows the likely failed component

Common WGD94HEXW1 parts customers look up by model

These are frequent wear or troubleshooting-related items for this model:

• Dryer repair kit 4392067 (common drum support wear items bundled together)
• Dryer drum support roller WPW10314173 (squealing, thumping, drum drag)
• Dryer idler pulley W10837240 (belt noise, belt tracking issues)
• Igniter 279311 (no heat, burner not lighting)
• Dryer thermal cut-off kit WP8573713 (no heat, overheating protection opened)

Why it matters

Model-based searching prevents mismatched gas-dryer parts, especially in the heating system and airflow path. It also helps you follow the correct maintenance guidance, such as keeping the exhaust vent and dryer interior free of lint buildup, which supports safe operation and proper drying performance.

Last updated: February 2026

Your Whirlpool WGD94HEXW1 dryer part number is printed on the part itself (often on a sticker, stamp, or molded marking). For the fastest match, we use your dryer’s model number from the rating plate, then look up the exact part number in the parts diagram and list in the WGD94HEXW1 owner's manual.

Where to look first (most common spots)

• On the part body: sticker or stamped number on items like the drive motor, blower wheel, or control board
• Behind the lint screen housing: some duct and housing parts have labels nearby
• Inside the cabinet: rollers, idler pulley, and drum-related parts may have markings on the component
• Gas burner area (gas models): labels can be on the burner components or nearby brackets
• Wiring harness tags: some harnesses have printed IDs, but we still match by model for accuracy

Use the rating plate to match the correct part

On gas dryers like the WGD94HEXW1, the rating plate is typically in the door opening (door well). That label confirms the model and key configuration details used to select the correct replacement part.

What you have	What we recommend using	Why it’s best
A number printed on the old part	Model-based lookup + diagram match	Part numbers can change by revision
Only the dryer model number	WGD94HEXW1	Ensures correct fit for your exact series
No readable numbers	Visual match using diagrams	Confirms shape, mounting, and connections

When the part number is hard to read

• Take a clear photo of the label (good light, no glare)
• Compare the part’s shape and mounting points to the diagram
• If you are replacing common wear items, consider a kit that covers multiple related parts, such as the dryer repair kit 4392067

Why it matters

Using the correct part number prevents fit issues, repeat repairs, and performance problems (for example, a wrong roller or idler pulley can cause noise and belt wear).

Last updated: February 2026

Common Whirlpool dryer problems (including the Whirlpool WGD94HEXW1 27-inch gas dryer) are no-start, no-heat, long dry times, and unusual noises or no tumbling. Many issues trace back to power supply, airflow restrictions, or normal wear parts like rollers, pulleys, and sensors; see the WGD94HEXW1 owner's manual for model-specific checks.

Most common symptoms and what usually causes them

• Dryer will not run: door not fully closed, START/PAUSE not held 2 to 5 seconds, tripped breaker or blown fuse
• Dryer runs but will not heat (gas): airflow restriction, ignition system issue (igniter, radiant sensor, gas valve coils)
• Drying times too long: clogged lint screen, crushed or kinked vent, too many vent turns, room temperature below about 45°F
• Stops early or clothes still damp on Auto cycles: load not contacting moisture sensors, wrong cycle or temperature selection
• Squealing, thumping, or rumbling: worn drum support rollers, idler pulley, or belt-related wear

Quick checks we recommend first (fast, no parts)

1. Confirm the door closes fully and the latch engages.
2. Press and hold START/PAUSE for 2 to 5 seconds.
3. Check both household fuses or breakers feeding the dryer circuit.
4. Clean the lint screen and inspect the vent path for restrictions.
5. For Auto cycles, avoid very small loads and make sure items can contact the sensor strips.

Parts that commonly fix noise, no-tumble, or poor drying

Symptom	Common wear part	Example for WGD94HEXW1
Squeal or rumble	Drum support roller	Dryer drum support roller WPW10314173
Squeal, belt slack	Idler pulley	Dryer idler pulley W10837240
Long dry times, weak airflow	Blower wheel	Dryer blower wheel WP697772
Auto dry inaccurate	Moisture sensor	Dryer moisture sensor WP3387223

Why it matters

A dryer that runs with restricted airflow can overheat, shut down on safety devices, and take much longer to dry. Catching venting problems and worn drum support parts early helps protect the motor, drum, and heating system.

Last updated: February 2026