Kenmore 11060022010 electric dryer Parts

For Kenmore electric dryer model 11060022010, the model number is printed on the appliance’s identification label (model/serial tag). On most dryers, the quickest place to find it is just inside the door opening on the door frame or cabinet rim; confirm the exact format in the 11060022010 installation guide.

Where to look first (most common spots)

Check these locations in order:

• Inside the dryer door opening on the door frame (open the door and look around the rim)
• On the back panel of the dryer cabinet
• Along the side of the door opening (left or right cabinet edge)
• Behind the lower front access panel (some designs)
• Inside the control console area (less common)

What the label looks like

The label usually includes both a model number and a serial number. For parts lookup and diagrams, we recommend using the model number exactly as printed.

Label item	What it’s used for	Example for this page
Model number	Identifies the exact dryer design for parts	11060022010
Serial number	Production info; sometimes needed for service	Varies by unit

Tips to avoid common mistakes

• Write the model number exactly, including all digits (no spaces).
• Don’t use numbers from the timer knob, door, or motor tag; those are part numbers.
• If the label is worn, use a flashlight and take a close-up photo to zoom in.

Why it matters

Kenmore dryers can look similar across multiple series, but parts like a door switch, timer, or drive belt can vary by model. Using the correct model number helps ensure the replacement part fits and installs correctly.

Last updated: January 2026

On a Kenmore dryer model 11060022010, PF stands for power failure. It means the dryer’s control detected an interruption in electrical power during or right before a cycle, so the cycle may have stopped or reset (see the 11060022010 user manual).

What to do when you see PF

• Press Cancel/Stop to clear the display, then reselect your cycle and press Start.
• Check the dryer’s plug and outlet for a loose connection.
• Check your home’s breaker(s) for the dryer; many electric dryers use a 240V circuit that can trip partially.
• Avoid using an extension cord or power strip with the dryer.
• If PF happens repeatedly, consider having the outlet and circuit checked by a qualified electrician.

Quick checks (most common causes)

Likely cause	What you’ll notice	What to check
Brief outage or flicker	PF appears after a storm or utility issue	Reset cycle and run again
Loose power cord or outlet	PF happens when the dryer vibrates	Plug fit, outlet tension
Tripped breaker	Dryer won’t run or runs oddly	Reset both dryer breakers
Intermittent house wiring issue	PF appears randomly	Electrician inspection

Why it matters

A PF code is usually not a failed dryer part; it is the dryer protecting the cycle logic after losing power. Repeated PF events can point to a power supply problem that can also cause no-heat, no-start, or inconsistent drying.

Related help

For more Kenmore dryer code explanations and what to check next, use our Kenmore 110 series electronic control model dryer error codes guide.

Last updated: January 2026

To hard reset your Kenmore electric dryer model 11060022010, we recommend a basic power reset: shut it off, disconnect power for about 1 minute, then restore power and try a Timed Dry cycle. This clears minor control glitches but won’t fix a blown safety fuse.

Reset steps for model 11060022010

• Turn the dryer OFF.
• Unplug the power cord (or switch OFF the 240V breaker).
• Wait 60 seconds.
• Restore power.
• Close the door firmly.
• Start a Timed Dry / High Heat cycle.

For model-specific operating checks and troubleshooting, use the 11060022010 installation guide.

If the dryer still will not start after a reset

A reset won’t restore operation if a safety circuit is open or a start component has failed. Check these common causes:

• Tripped breaker (many electric dryers use a 2-pole breaker; one side can trip)
• Door not fully closed or a failed door switch
• Overheating event that opened a thermal safety device
• Failed push-to-start switch
• Failed timer or drive motor

Parts that commonly stop the dryer from running

If your symptoms match, these parts are commonly involved on this model:

• Door switch WP3406105 (dryer thinks the door is open)
• Dryer push-to-start switch WP3977456 (start button does nothing)
• Dryer thermal cut-off fuse kit 279816 (thermal cut-off protection in the heating circuit)

Quick symptom-to-likely-cause table

What you see	What it usually means	What to check first
Nothing happens when you press Start	No power or open start circuit	Breaker, door switch, start switch
Motor hums but drum won’t turn	Belt or motor drive problem	Belt, idler pulley, motor
Runs but no heat	Heating circuit or airflow issue	Venting, thermal cut-off, element

Why it matters

A power reset can clear a temporary control issue, but repeated shutdowns often point to airflow restriction or a failing electrical part. Fixing the root cause helps prevent repeat no-start or no-heat problems.

Last updated: January 2026