Craftsman 917370432 lawn mower Parts

On the Craftsman walk-behind mower model 917370432, the model number is typically on a printed ID label attached to the mower deck or rear housing area (not on the engine). We use that mower model number to match the correct chassis, handle, and deck parts.

Where to look on model 917370432

Check these common label locations first:

• Top of the mower deck near the rear discharge opening
• Rear of the deck behind the bagger area
• Side of the deck near a rear wheel height adjuster
• On the handle support brackets near where the handle bolts to the deck
• Under the deck lip (you may need a flashlight)

For diagrams and the exact identification info used for this mower, use the 917370432 manual.

Mower model number vs. engine model number

Many gas walk-behind mowers have two IDs. For Craftsman model 917370432, we generally use the mower model number for non-engine parts.

What you are replacing	Which number matters most	Where it’s found
Deck, wheels, height adjusters, bagger parts	Mower model number (917370432)	Mower deck / rear housing
Engine parts (carburetor, recoil starter, ignition)	Engine model/type/code	On the engine shroud or valve cover area

Tips to read the label successfully

If the label is dirty or faded, these steps usually help:

• Brush off dry grass and debris first
• Wipe with a damp rag; avoid soaking the label
• Use a phone camera and zoom in for small print
• Write down the full model number exactly as shown

Why it matters

Using the correct model number prevents ordering the wrong blade, cable, or deck hardware. Even small changes between similar Craftsman walk-behind mowers can affect fit, mounting holes, and cable routing.

Last updated: January 2026

On Craftsman model 917370432, the serial number format is not standardized across all Craftsman mowers, so we cannot reliably decode the build date from the digits alone without matching it to the exact ID label style used on your mower. Use the label details and the 917370432 owner’s manual to confirm where to find the model and serial information.

Where to find the serial number on model 917370432

Most walk-behind Craftsman mowers place the ID label in one of these spots:

• On the rear of the deck near the discharge opening
• On the top of the deck near the engine mounting area
• On the rear frame crossmember (behind the engine)
• Near the height adjuster area on the deck side

How to interpret the serial number (what we can and cannot confirm)

Because Craftsman serial formats vary by manufacturer and production run, the safest approach is to use the label context.

• Look for a separate date code or DOM (date of manufacture) field on the same sticker
• Check whether the label lists an engine model/type/code (engine codes often carry date info)
• Do not assume the first 6 digits are always MMDDYY; that pattern is not universal
• If the mower was serviced before, the deck or label could have been replaced

Quick guide

What you see on the label	What it usually means	What to do
“Model” + “Serial” only	Serial may be internal tracking	Use model number for parts lookup
“DOM” or “MFG DATE”	Actual build date	Use that date field
Engine code present	Engine build date may be decodable	Compare to mower purchase timeframe

Why it matters

Reading the serial number correctly helps avoid ordering the wrong blade, cable, or deck hardware when there were mid-year changes. For example, if you are matching a replacement blade, confirm fit by model first, then compare the removed blade.

• For a common wear item, see husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825

Last updated: January 2026

To identify what kind of lawn mower you have, start with the model number on the mower’s ID label. For this Craftsman walk-behind mower, the key identifier is model 917370432; we use that number to match the correct mower parts diagrams and the correct engine information in the Craftsman 917370432 manual.

Where to look for the model and engine numbers

Most walk-behind mowers have two important IDs:

• Mower model number (Craftsman 917370432): identifies the deck, handle, wheels, drive system, and safety controls
• Engine model/type/code (on the engine itself): identifies engine-specific parts like the carburetor, spark plug, air filter, and recoil starter
• Product ID label location: commonly on the rear of the deck, near the height adjusters, or on the handle support
• Engine label location: typically on the blower housing, valve cover area, or near the muffler

How the numbers affect parts and diagrams

For model 917370432, it’s normal to use:

• A mower parts diagram for chassis items (blade, wheels, drive cable, height adjusters)
• A separate engine parts lookup using the engine’s model/type/code

If you are shopping for a mower-deck part, the mower model number is usually enough. For example, blade fitment is tied to the deck design; a common replacement item is the husqvarna lawn mower 22-inch deck 3-in-1 blade 532421825.

Quick checklist before ordering parts

• Confirm the mower model number matches exactly: 917370432
• Write down the engine model/type/code from the engine label
• Compare the old part to the diagram (mounting holes, cable ends, bracket shape)
• If replacing a blade, verify deck size and mounting style; do not guess by length alone

What you’re identifying	Where to find it	What it’s used for
Mower model number (917370432)	Mower ID label	Deck and chassis parts diagrams
Engine model/type/code	Engine label	Engine parts diagrams

Why it matters

Using the correct mower model number and the engine’s ID prevents wrong-part orders, especially on items that look similar (blades, control cables, drive components). It also speeds up troubleshooting because you can follow the right diagram for the mower versus the engine.

Last updated: January 2026