Kenmore 79046353401 electric range Parts

To reset your Kenmore electric range model 79046353401, we recommend doing a full power reset: turn the range off, shut off power at the breaker for 1 to 5 minutes, then restore power and set the clock. This clears many control glitches and false error beeps.

• Turn all surface elements and the oven OFF.
• Switch the range circuit OFF at the home breaker panel (or remove the range fuse).
• Wait 1 to 5 minutes.
• Turn the breaker ON.
• Re-set the time using the clock instructions in the 79046353401 owner's manual.

A reset helps when the control is “confused”, but it will not fix a failed part. After restoring power, check these common symptoms:

• Oven not heating: bake or broil element may be failing.
• Temperature seems wrong: sensor or control issue.
• Cooktop burner not working: radiant element, switch, or wiring issue.
• Hot surface light stays on: indicator circuit or element issue.
• No power at all: terminal block or house supply problem.

A breaker reset is the fastest safe way to clear minor electronic control faults after a power flicker or keypad misread. If the problem returns quickly, troubleshooting the heating circuit (elements, sensor, wiring, control) prevents repeated shutdowns and uneven cooking.

Last updated: February 2026

To identify your Kenmore stove model, we recommend finding the model and serial tag on the appliance and matching it exactly, character for character. For Kenmore ranges, the tag is commonly on the oven door frame or around the storage drawer opening; your model number will look like 79046353401.

Check these common locations first (use a flashlight and wipe grease off the label so you can read it clearly):

• Oven door frame: open the oven door and look along the frame edge
• Storage drawer area: pull the bottom drawer out and look on the frame inside the opening
• Back panel: on the rear of the range (sometimes near the power cord entry)
• Under the cooktop: on some styles, lifting the cooktop can reveal the tag

On Kenmore ranges, the model number is usually printed near wording such as “Model,” “Model No.,” or “MOD.” Copy it exactly, including all digits.

We use the model number to match the correct wiring, control layout, and component versions for your exact electric range. That is especially important for parts like a surface element, oven temperature sensor, or control panel overlay.

Once you find the tag, compare it to the model shown in your 79046353401 owner’s manual. If you are replacing a common wear item, the oven light is a frequent example; this model uses an appliance-style oven bulb and the manual outlines safe replacement steps.

Last updated: February 2026

The oven capacity (cubic feet) for Kenmore electric range model 79046353401 is determined by the usable oven interior volume. When the exact cubic-foot rating is not listed on the model label you can calculate it by measuring the oven cavity and converting cubic inches to cubic feet using the steps in the 79046353401 owner's manual.

Use a tape measure and measure the inside of the oven cavity (not the door opening).

• Remove oven racks for easier measuring.
• Measure width (left wall to right wall).
• Measure height (oven floor to oven ceiling).
• Measure depth (back wall to inside of the closed door, not the handle).
• Multiply: width x height x depth to get cubic inches.
• Divide by 1,728 to convert to cubic feet.

These examples show how the math works; your measurements will be different.

Most Kenmore 790 slide-in electric ranges are commonly in the 4.8 to 5.0 cu. ft. range, but the most accurate result for your specific 79046353401 is the measurement-based calculation above.

Oven capacity affects how well large items fit (turkey roasters, full sheet pans), how you plan multi-rack baking, and whether replacement racks and accessories will match the usable space.

Last updated: February 2026

Kenmore model numbers tell us who built the appliance and which parts fit. For Kenmore electric ranges like model 79046353401, the first three digits (790) identify the manufacturer family, and the remaining digits narrow down the exact design and feature set so we can match the correct Kenmore parts.

We typically see the model/serial tag in one of these spots:

• On the oven frame behind the storage drawer or lower panel
• Along the oven door frame (visible when the door is open)
• Behind the control panel area (less common)
• On the back of the range (sometimes)

For diagrams and model identification notes specific to this range family, use the 79046353401 owner's manual.

Kenmore numbers are usually read left to right.

• Prefix (first 3 digits): manufacturer source code (example: 790 for many Kenmore ranges)
• Core model digits: platform and configuration (slide-in vs. freestanding, control style, etc.)
• Suffix digits: revisions, color/finish, or feature variations

Using the full model number prevents common fit issues, especially for electrical and control parts.

• Heating parts (bake/broil elements, surface elements) can vary by revision
• Control parts (overlay, control panel) are model- and series-specific
• Sensor and wiring connections must match exactly

If you are troubleshooting heat or temperature problems, the range oven temperature sensor 316217002 is one of the common parts tied to temperature regulation on this model family.

Last updated: February 2026