Kenmore 79095411100 electric range Parts

For the Kenmore electric range model 79095411100, the most reliable “reset” is a power reset: turn the range off, cut power at the breaker for 1 minute, then restore power and reset the clock and any oven settings per the 79095411100 owner's manual.

Quick reset options (use the one that matches your symptom)

• Control acting frozen or unresponsive: breaker reset (OFF 1 minute, then ON).
• After a power outage: turn all knobs/pads OFF, restore power, then reset the clock and oven function.
• Oven controls locked / “LOC” showing: press and hold the lockout pad for 3 seconds to toggle lockout.
• Stuck after self-clean: press Cancel/Stop; wait about 1 hour for the oven to cool and the lock light to go out.
• Cooking temperature seems off (not a reset): use the oven temperature adjustment procedure in the manual.

Step-by-step: breaker reset (recommended)

1. Turn all surface element knobs to OFF.
2. Set the oven to OFF/Cancel.
3. Switch the range circuit breaker OFF for 60 seconds.
4. Switch the breaker ON.
5. Set the time of day and reprogram any features (timed bake, delay start) using the 79095411100 owner's manual.

If “LOC” is on (oven lockout)

The control can lock the door and inactivate oven controls.

What you see	What to do	What to expect
“LOC” in display	Press and hold the lockout pad for 3 seconds	Door unlocks and controls work normally
Door locked light flashing	Do not open the door	Allow about 15 seconds for the lock motor to finish

Why it matters

A true reset clears a temporary control glitch and restores normal keypad operation. If the range was left ON during a power interruption, it can restart unexpectedly when power returns, so turning everything OFF first prevents unsafe operation.

Last updated: February 2026

For Kenmore ranges like model 79095411100, the model number is printed on the serial plate. On this style of electric range, the serial plate is on the right side of the oven front frame, typically behind the storage (or warmer) drawer or behind the lower panel.

Where to look on a Kenmore range

Check these common label locations first:

• Open the storage drawer and look on the right-hand oven front frame
• If your range has a removable lower panel (instead of a drawer), check behind that panel
• Look for a metal or foil serial plate, not a paper tag
• Record both the model and serial number exactly as shown
• If you are ordering parts, also note any lot number or letter shown on the plate

For the exact label location illustration and wording, use the 79095411100 owner's manual.

What the serial plate tells you (and why it matters)

Besides the model number, the serial plate also lists electrical information that helps match parts and wiring:

• Voltage rating
• Kilowatt (kW) rating (power requirements)
• Serial number (helps identify production run)

Why it matters

Using the correct model number prevents ordering the wrong bake element, broil element, control switch, or wiring parts. Even small model-number differences can change which parts fit.

Quick checklist: model number vs. serial number

Item	What it’s used for	Example (format)
Model number	Identifies the exact range design and parts list	79095411100
Serial number	Identifies the specific unit and production run	Letters and numbers

If the label is hard to read

• Wipe the plate gently with a damp cloth and mild dish soap; dry it fully
• Use a flashlight at an angle to make stamped text easier to see
• Take a close-up photo and zoom in

Last updated: February 2026

On Kenmore electric range model 79095411100, an F11 beeping condition points to a stuck or failing keypad (touchpad) or an electronic control input that is being “held” continuously. We start by clearing the fault with CANCEL and a short power reset; if the beeping returns, the control panel components need service.

Quick fixes to try first

• Press CANCEL/CLEAR once to stop the beeping and clear the display.
• Turn power off at the breaker for 5 minutes, then restore power.
• If the beeping stops, test several keys; a key that does not “click” or responds by itself indicates a stuck touchpad.
• If the beeping returns immediately after power is restored, leave power off and proceed to diagnosis.
• If you recently cleaned the control panel, let it dry fully; moisture can trigger false key presses.

What usually causes F11 on this style of Kenmore range

Likely cause	What you notice	Typical fix
Stuck key / failing touchpad	Random beeps, keys act “pressed”	Replace the touchpad or control panel assembly (model dependent)
Loose ribbon connector	Beeping after moving range or slamming door	Reseat connector (power off)
Electronic oven control issue	Beeping persists with keypad disconnected	Replace control (model dependent)

Parts that may be involved

If the beeping is tied to a specific function or switch input, these model-listed parts are common suspects during diagnosis:

• Oven switch 316436000 (can contribute to odd control behavior if it is shorted)
• Range control overlay 316220805 (overlay and keypad area wear can lead to stuck-key symptoms)

Why it matters

Continuous beeping is the control telling you it detected an input fault. Clearing it quickly prevents interrupted cooking, avoids unexpected heating behavior, and helps you pinpoint whether the issue is a temporary glitch or a failing touchpad/control.

Where to confirm the reset and control behavior

Use the 79095411100 owner's manual for the exact CANCEL key behavior, control features (including silent mode), and what to expect after a power outage.

Last updated: February 2026