Range Surface Element Control Switch 316436001

A different version than original, but following wiring destinations on back of old to new very easy to install, works perfect

The controls were easy to replace and no special tools required.

I opened the main breaker and removed power from the stove. Then simply remove the back cover of the upper stove, I removed the wires one at a time and installed them in the correct terminal on the new infinite switch so there was no confusion or notes needed. Then placed the new switch in position and attached to the stove. Returned power to the stove and checked the operation of the burner. It appears to have corrected the problem. We will cook on it and verify that it is corrected..

took a photo before I removed the oldoneand used it as reference when isnatalling the new ones.

easy l came quickly Im trying im trying redicilous

Took about 30 minutes. Pulled the stove out, unplugged it, took the knobs off unscrewed the two control knobs. Took the back panel off, pulled the old switch out. Pulled the wires out of the old lug and plugged them into the new switches. Screwed in the switch. Put the knobs back on. Reinstalled the back panel. Plugged the stove back in, tested the stove switches and pushed the stove back into its spot.

Exact replacement, easy to install, stove back to near new condition. Working perfectly and as expected.

Got the part in a timely manner. Was the correct part and easy to install. stove is working perfect once again. No flare ups when cooking. Thank You!