Craftsman 917258880 tractor Parts

Replacing the engine on your Craftsman 917258880 front-engine lawn tractor is worth it when the tractor’s deck, steering, and drive system are solid and the total engine-swap cost stays well below the cost of a comparable replacement tractor. If multiple major systems are worn out, replacement is the better value.

• The mower deck is not rusted through, cracked, or badly bent
• The transmission and ground drive work smoothly (no slipping, grinding, or loss of power)
• Steering is tight enough to control safely (no severe play)
• You can source the correct engine and any required mounting or pulley parts
• The total repair cost (engine plus incidentals) is clearly less than a replacement unit
• You plan to keep the tractor for several more seasons

Even when the engine is the main issue, we often see related problems that affect starting, blade engagement, or drive performance:

• Starting circuit issues (a weak solenoid can mimic a bad engine): solenoid 532146154
• Blade engagement problems (PTO switch failures can prevent the clutch from engaging): switch.pto.3 582107601
• Worn drive belts that slip under load: lawn tractor lawn mower secondary v-belt 532137153 and husqvarna lawn tractor drive belt, 1/2 x 83-3/4 in 532139573

An engine replacement only pays off when the rest of the Craftsman 917258880 is worth saving. If the deck, drivetrain, and steering are healthy, a new engine can restore dependable mowing for years; if those systems are failing, you risk spending engine money and still ending up with an unreliable tractor.

Last updated: February 2026

The model number 917258880 on your Craftsman front-engine lawn tractor does not contain the manufacturing year. To identify the year, we use the tractor’s product identification label (often under the seat or on the frame) and read the date code/serial information printed there.

Look for a sticker or metal tag that includes a serial number and date information. Common locations include:

• Under the seat pan (lift the seat)
• On the rear frame near the hitch plate
• On the left or right frame rail near the engine
• Near the battery tray area

Craftsman riding mowers commonly use a separate date code on the ID label. The format varies by production run, but these checks usually get you to the correct year:

• Look for an explicit date (MM/DD/YY or MM/DD/YYYY) on the label
• If you see a 6-digit date code, it is often read as MMDDYY
• If you see a longer serial, look for a date segment or a printed “DOM” (date of manufacture)

The correct year helps us match the right diagrams and parts for your exact build, especially for items that change across production runs like belts, steering parts, and electrical components.

If you are troubleshooting a no-start or click-no-crank issue while you are checking the ID label, the riding lawn mower engine clicks but doesnt turn over video is a solid next step, and a failed starter solenoid is a common cause on tractors like this (see solenoid 532146154).

Last updated: February 2026

For a Craftsman riding lawn tractor like model 917258880, a full engine replacement typically costs about $260 to $1,800 installed, depending on the engine type, labor rates, and whether related parts (battery cables, belts, fuel parts) also need service.

Engine replacement pricing is usually a mix of parts, labor, and “while we’re in there” items.

• Engine cost and availability (new vs. rebuilt, horsepower, shaft size, charging system)
• Labor time (a riding mower engine swap commonly runs around 6 hours)
• Extra parts discovered during removal (worn belts, damaged wiring, leaking fuel components)
• Shop supplies and pickup/delivery (varies by area)
• Condition of mounting hardware (rusted bolts can add time)

Even if the engine is the main issue, these items often get inspected or replaced to prevent repeat problems:

• Starter circuit components such as the solenoid 532146154
• Fuel system parts such as the husqvarna lawn tractor fuel tank 532151346
• Deck and drive wear items such as the lawn tractor lawn mower secondary v-belt 532137153
• Blade drive wear items such as the husqvarna lawn tractor drive belt, 1/2 x 83-3/4 in 532139573
• PTO engagement controls such as the switch.pto.3 582107601

A correct engine match (shaft size, mounting pattern, electrical output) prevents fitment issues and charging or PTO problems after installation. Checking related systems at the same time helps your 917258880 run reliably once the new engine is in.

Last updated: February 2026

The Craftsman riding mower model 917258880 uses a gas-powered, single-cylinder riding mower engine; the exact engine brand, horsepower, and model are determined by the engine’s ID label on your tractor (typically on the blower housing or valve cover). Use that ID to match tune-up and starting-system parts.

Look for an engine identification tag or stamped numbers and record:

• Engine manufacturer name (commonly Briggs & Stratton, Kohler, or Tecumseh on tractors of this era)
• Engine model number
• Type and trim code (or spec number)
• Code/date number (helps match parts revisions)

Once you have those numbers, you can confidently select the correct ignition, fuel, and starting parts for your specific engine configuration.

If you are chasing a no-start, click-no-crank, or intermittent crank issue, these model-matched parts are frequent suspects:

• Solenoid 532146154 (starter solenoid; can click but fail to pass full battery power)
• Switch.pto.3 582107601 (PTO switch; a faulty switch can interrupt the safety/start circuit)
• Battery cables and terminals (corrosion causes voltage drop)
• Fuel supply components (stale fuel, restricted flow)
• Air filter and spark plug (basic tune-up items)

For step-by-step diagnosis, use our DIY video: riding lawn mower engine clicks but doesnt turn over video.

Craftsman tractor model numbers identify the chassis and tractor build, but engine parts are matched to the engine’s own model and spec numbers. Using the engine ID prevents ordering the wrong carburetor, ignition coil, starter, or tune-up parts.

Last updated: February 2026

On your Craftsman front-engine lawn tractor model 917258880, the engine model number is stamped or printed on the engine itself (not the tractor frame tag). Check the top of the engine near the cylinder area; the ID can be on the right or left side depending on the engine layout.

With the engine off and cool, use a flashlight and wipe away dirt or oil. Check these common ID locations:

• Top of the engine near the cylinder head(s) or valve cover area
• Blower housing or engine shroud near the top
• A flat machined pad on the engine block with numbers stamped into the metal
• A label plate or sticker on the engine (often on the shroud or near the valve cover)
• Near the starter or fuel tank area where the engine is easiest to access

Copy every line exactly as shown; engine IDs are often split into multiple fields.

The tractor model number 917258880 identifies chassis and deck parts, but the engine model number is what we use to match engine-specific maintenance and repair items. Having both numbers prevents ordering the wrong part.

If you are chasing a no-crank symptom while you locate the engine ID, follow the steps in riding lawn mower engine clicks but doesnt turn over video.

Last updated: February 2026