Kenmore Elite 10657789703 side-by-side refrigerator Parts

For Kenmore Elite model 10657789703, the most reliable way to get cubic feet is to look up the capacity in the specifications section of the owner's manual. If you cannot find it there, you can estimate capacity by measuring the usable interior space and converting cubic inches to cubic feet.

In the owner's manual, check sections such as Product specifications, Features, or Model information. That is where capacity (total cubic feet, and sometimes refrigerator vs. freezer split) is typically listed for your exact model.

This gives a close estimate of usable space (not the advertised capacity).

• Empty the compartments so you can measure accurately.
• Measure interior width, height, and depth in inches for:
  • Fresh food (refrigerator) section
  • Freezer section
• Multiply each section: W x H x D = cubic inches.
• Add the two sections together.
• Divide by 1728 to convert to cubic feet.

Kenmore model numbers mainly identify the manufacturer source and configuration, not a consistent “capacity code.” Some Kenmore prefixes (such as 253) are often associated with certain capacity ranges, but 106 models do not follow a simple, dependable cubic-feet pattern you can decode from the digits alone.

Knowing cubic feet helps you compare refrigerator sizes, choose storage accessories, and set realistic expectations for shelf and bin space. It also helps when shopping for replacement items like a refrigerator deli drawer WP2188664 that must fit your exact interior layout.

Last updated: February 2026

A Kenmore Elite side-by-side refrigerator like model 10657789703 typically lasts 10 to 15 years. Regular maintenance (especially keeping airflow clear, maintaining door seals, and staying on top of water filter changes) helps you reach the high end of that range; see the owner's manual for care and use details.

Most refrigerators in this class land in the 10 to 15 year window. The biggest factors that shorten or extend life are heat load, airflow, and how hard the sealed system and fans have to work.

• Keep condenser and ventilation areas clean and unobstructed
• Make sure doors close and seal tightly (avoid warm air leaks)
• Set stable temperatures and avoid frequent wide adjustments
• Replace the water filter on schedule to protect the water system
• Fix small issues early (noisy fan, frost buildup, slow ice production)

Use this as a practical checkpoint once your refrigerator is past the 10-year mark.

If performance issues are tied to ice, water, or defrosting, these model-compatible parts are often involved:

• Refrigerator ice maker 2198597 for no ice or irregular ice production
• Refrigerator defrost heater WP2323198 for frost buildup and warming temps
• Kenmore refrigerator water filter 9083 for low flow, taste/odor issues, and dispenser performance

Knowing the typical lifespan helps you plan: if your 10657789703 is approaching 10 to 15 years, proactive maintenance and timely part replacement can prevent food loss, reduce energy waste, and avoid bigger failures.

Last updated: February 2026

Common issues we see with the Kenmore Elite 10657789703 side-by-side refrigerator include warm temperatures from blocked airflow, frost buildup from defrost-system trouble, unusual operating noises, and water or ice dispenser problems (often tied to the filter or water supply). The troubleshooting section in the owner's manual covers many of these symptoms and quick checks.

• Not cooling or weak cooling: blocked vents, dirty condenser area, evaporator fan not moving air
• Frost or ice buildup: defrost heater or defrost thermostat issues
• Loud or new noises: normal fan and defrost sounds, or a failing fan motor/blade
• Water leaking: defrost drain issues or water line connection problems
• No ice or slow ice production: water supply restriction, filter restriction, inlet valve issues

1. Confirm airflow is not blocked: keep food from covering freezer and refrigerator vents (blocked vents cause temperature and moisture problems).
2. Give temperature changes time: after adjusting controls, allow 24 hours for temperatures to stabilize.
3. Listen for “normal sounds”: during defrost you may hear water running into the drain pan; you may also hear air moving over the condenser.
4. Check the water system basics: verify the refrigerator is connected to a cold water pipe and the supply valve is fully open.

On a side-by-side like the Kenmore Elite 10657789703, airflow between the freezer and refrigerator sections is what keeps both compartments at the right temperature. When vents are blocked or the defrost system cannot clear frost, airflow drops and cooling problems show up fast.

Last updated: February 2026

Your refrigerator model is Kenmore ELITE 10657789703. To confirm it on the appliance, match the model number on the rating label inside the fresh food or freezer compartment to what’s shown in the 10657789703 owner's manual.

On Kenmore side-by-side refrigerators like model 10657789703, the model and serial tag is typically located in one of these spots:

• On an inside wall of the refrigerator (fresh food) compartment
• On an inside wall of the freezer compartment
• On the inside edge of a door frame (refrigerator or freezer door)
• Behind the lower crisper drawers on the interior wall
• Near the front base area behind the toe grille or kickplate

Record these details exactly as shown on the label:

• Model number (for example: 10657789703)
• Serial number (helps identify production details)
• Electrical rating (useful for troubleshooting power issues)
• Refrigerant and system info (useful for sealed system service)

The model number is what we use to match the correct parts diagrams and compatible replacement parts. Even small model-number differences can change which water filter, ice maker, door bin, or control board fits.

Once you confirm the model number, common parts customers replace on this model include the refrigerator water filter 9083 and the refrigerator ice maker 2198597.

Last updated: February 2026

Kenmore Elite model 10657789703 is a Kenmore-branded side-by-side refrigerator sold under the Kenmore name. Kenmore is a retail brand, so the actual manufacturer is identified by the model’s source code and details shown in the product documentation for this refrigerator; check the 10657789703 owner's manual for the model identification information.

We use the model and ID information on the rating label and in the documentation to confirm who built a specific Kenmore refrigerator.

• Look for the model and serial tag inside the fresh food compartment (commonly on a side wall or ceiling area).
• Note the full model number: 10657789703.
• Check for a manufacturer/source prefix (Kenmore models often use a numeric prefix to indicate the source).
• Match that information to the identification details referenced in the manual.
• Use the model number when ordering parts to ensure correct fit.

Kenmore model numbers that start with 106 are commonly associated with Whirlpool-built Kenmore refrigerators. That said, the most reliable way to confirm the exact build source for your unit is to use the identification details tied to your specific serial tag and documentation.

Knowing who manufactured the refrigerator helps when you are matching design details during troubleshooting and when selecting compatible replacement parts (for example, ice maker, water filter, or dispenser components).

If you are replacing common maintenance items, we list model-matched options such as the Kenmore refrigerator water filter 9083 and the refrigerator ice maker 2198597.

Last updated: February 2026