Maytag MDB4949SHB0 dishwasher Parts

Yes. For your Maytag MDB4949SHB0 dishwasher, a lower dBA rating is better because it means the dishwasher runs quieter. Most households find anything in the low-to-mid 40 dBA range very quiet; going below that is mainly for ultra-quiet preferences.

What dBA means in real use

Dishwasher sound ratings are measured in dBA; lower numbers mean less perceived noise.

• 50+ dBA: clearly audible in the room
• 45 to 49 dBA: moderate, usually not disruptive
• 40 to 44 dBA: very quiet for most kitchens
• Below 40 dBA: ultra-quiet, typically a premium feature

Noise vs. performance (what to expect)

Quiet dishwashers still make normal operating sounds. In the MDB4949SHB0 manual, common “normal” noises include periodic draining surges, water valve hissing, and a snap when the detergent dispenser opens. Improper installation and dishes interfering with the spray arms can also increase noise. See the owner's manual for operating notes and troubleshooting.

Quick checks that reduce noise

• Make sure the dishwasher is level and firmly mounted
• Keep tall items from hitting the wash arms
• Avoid overcrowding so items do not rattle
• Run hot water at the sink before starting to reduce long heat-up periods
• If the unit is noisy during draining and also leaves water behind, inspect the drain path and consider the dishwasher drain pump WPW10348269

When paying for lower dBA is worth it

If you...	Lower dBA matters more because...
Have an open-concept kitchen	Noise carries into living areas
Run cycles overnight	Quieter operation is less disruptive
Work from home near the kitchen	Background noise is more noticeable
Rarely run the dishwasher while home	You may not benefit much

Why it matters

A lower dBA rating improves comfort, but it does not automatically mean better cleaning. Cleaning results depend more on loading, detergent, rinse aid use, and proper water temperature than on sound rating.

Last updated: February 2026

Pricing for a Maytag MDB4949SHB0 dishwasher depends on whether you are buying the full appliance new, used, or replacing parts. On this model’s parts page, we focus on replacement parts (such as seals, pumps, and hoses); use the MDB4949SHB0 owner's manual to confirm your exact model and features before ordering.

What you can expect to pay (typical ranges)

Dishwasher pricing changes by finish, promotions, and availability, but these are common ranges for a new 24-inch built-in Maytag dishwasher in this class:

• New appliance: typically $550 to $900
• Open-box or scratch-and-dent: typically 10% to 30% less than new
• Used (local resale): typically $150 to $450, depending on age and condition
• Repair cost (parts only): often $10 to $250+, depending on the failed component

Common replacement-part costs for MDB4949SHB0

If you are pricing a repair instead of a full replacement, these parts for Maytag model MDB4949SHB0 are commonly purchased:

What you’re fixing	Example part on this page	Typical part-only cost impact
Door leaks	Tub gasket W11177741	Medium
Not draining	Dishwasher drain pump WPW10348269	Medium
Not filling	Dishwasher water inlet valve WPW10327249	Medium
Poor drying	Element assembly W10703867	Medium to high

Why it matters

If the dishwasher is otherwise in good shape, replacing a wear item like a door seal, drain pump, or inlet valve often restores normal operation for far less than the cost of a new dishwasher.

Quick tips before you decide to replace the dishwasher

• Confirm the model number MDB4949SHB0 from the tag inside the door.
• Check for simple issues first (clogged filter, kinked drain hose, loose door seal).
• If the unit has power but will not run, follow the checks in the MDB4949SHB0 owner's manual.
• If you are troubleshooting a no-start symptom, use dishwasher wont start video.

Last updated: February 2026

The most common Maytag dishwasher complaints are poor cleaning and draining problems. On the Maytag MDB4949SHB0, these issues are usually caused by restricted water flow (clogged filter or spray arms), a blocked drain path, or loading that interferes with the wash system or door latching. See the owner's manual for model-specific troubleshooting steps.

Most common symptoms and what usually causes them

• Not cleaning well: spray arms blocked, filter area dirty, overcrowding, low water temperature, or detergent issues
• Not draining: food debris in the sump area, drain hose restriction, air gap clogged (if installed), or a weak drain pump
• Won’t start or stops: door not fully latched, Start sequence not completed, or rack items interfering with the wash system
• Leaks: worn door seals, misaligned door, or loose hose connections
• Not drying: rinse aid empty, heat-dry option off, or heating circuit problem

Quick checks we recommend first (fast, no parts)

1. Confirm the door closes and latches with no rack items protruding.
2. Clean the filter and check spray arm holes for debris.
3. Check the drain hose routing for kinks and confirm the sink drain connection is clear.
4. If the dishwasher has water in the bottom, cancel the cycle and let it drain fully (the manual notes the unit will run a drain cycle after Cancel if water remains).

When a part is the likely fix

If basic cleaning and loading checks do not solve it, these model-matched parts are common culprits:

Symptom	Most likely part to check	What it affects
Standing water, slow drain	Dishwasher drain pump WPW10348269	Pushes water out during drain
Poor fill, weak wash	Dishwasher water inlet valve WPW10327249	Controls water entering the tub
Leaking at the door	Tub gasket W11177741 or dishwasher door seal, lower W10909089	Seals the door opening

Why it matters

Cleaning and draining problems often look like “the dishwasher is failing,” but they are frequently caused by airflow and water-flow restrictions. Fixing the root cause prevents repeat clogs, odors, and pump strain, and helps cycles finish normally.

Last updated: February 2026

A Maytag dishwasher typically lasts 10 to 12 years. With consistent care (cleaning, correct detergent, and avoiding clogs), many units reach 15 years. For your Maytag MDB4949SHB0, following the maintenance and operating guidance in the owner's manual helps you get the longest service life.

What affects dishwasher lifespan most

• Water quality: hard water speeds up mineral buildup on the heating system and internal parts.
• Filter and drain care: debris left in the sump can strain the drain system.
• Detergent and rinse aid use: using quality detergent packs and rinse aid supports cleaning performance.
• Loading habits: overloading can block spray arms and reduce wash performance.
• Leak prevention: worn seals can cause moisture damage around the door area.

Maintenance habits that extend life

We recommend these practical steps for MDB4949SHB0 owners:

• Clean the interior and follow routine care steps listed in the owner's manual.
• If the dishwasher is not draining well, check and clean the drain air gap (if your setup has one).
• Turn off water and power during long periods without use (vacation or seasonal shutdown).
• Keep the door sealing surfaces clean; replace worn seals when leaks start.

What you do	What it helps prevent	Parts commonly involved
Clean and maintain regularly	Odors, poor cleaning, buildup	(varies by symptom)
Address leaks early	Cabinet damage, corrosion	Tub gasket W11177741, dishwasher door seal, lower W10909089
Fix draining issues promptly	Standing water, pump strain	Dishwasher drain pump WPW10348269, dishwasher drain hose 8269144A

Why it matters

Dishwashers usually fail early from preventable issues like leaks, clogs, and mineral buildup. Staying ahead of those problems protects high-cost components (pumps, heater, control) and keeps cycle performance consistent.

Last updated: February 2026