Kenmore Elite 79572053118 refrigerator Parts

A Kenmore Elite refrigerator like model 79572053118 typically lasts 10 to 15 years with normal household use and basic maintenance. Keeping airflow clear, seals tight, and filters fresh helps the sealed system and compressor run efficiently for the long haul (see the 79572053118 owner's manual).

Typical lifespan ranges (what to expect)

Most modern bottom-mount refrigerators fall into these practical ranges:

• 10 to 15 years: common, expected service life
• 15+ years: achievable with good care and stable power conditions
• Under 10 years: usually tied to heavy use, poor ventilation, dirty condenser area, or skipped maintenance

Component	Typical impact on lifespan	What you can do
Compressor	Biggest driver of overall life	Keep condenser area clean, avoid overheating
Door gaskets	Affects run time and moisture	Keep seals clean, replace if torn or warped
Filters (water, air)	Protects taste, flow, and freshness	Replace on schedule
Defrost system	Prevents ice buildup and warm temps	Address frost issues early

Maintenance that extends life

These steps reduce compressor run time and temperature swings:

• Vacuum dust from the grille and condenser area regularly
• Keep doors closed as much as possible; avoid long “door open” periods
• Set stable temps (about 37°F fresh food, 0°F freezer)
• Replace the water filter on schedule (example: genuine Kenmore refrigerator water filter 9690 AGF80300801)
• Replace the air filter if odors linger or airflow seems reduced (example: lg refrigerator air filter ADQ73214408)

Why it matters

A refrigerator usually fails early when it has to run too long and too hot. Clean airflow paths, good door sealing, and timely filter changes help your Kenmore Elite maintain temperature with less strain, which directly supports a longer service life.

Last updated: February 2026

To level your Kenmore Elite refrigerator model 79572053118, we adjust the two front leveling legs until the cabinet feels steady and both doors close easily. For best door closing, set the front slightly higher than the rear, then recheck door operation.

What you’ll need

• 11/16-inch wrench or a flat-blade screwdriver (as specified in the 79572053118 owner's manual)
• A helper to gently push back on the top of the refrigerator (reduces weight on the legs)
• A small level (optional but helpful)

Step-by-step leveling (front-to-back and side-to-side)

1. Pull the refrigerator forward enough to access the front leveling legs.
2. Raise a side: turn the leveling leg left.
3. Lower a side: turn the leveling leg right.
4. Make small adjustments, then rock the cabinet slightly to confirm it sits solidly.
5. Open and close both fresh food doors; if they do not close easily, raise the front a bit more by turning both leveling legs to the left the same amount.

Door closing check (quick test)

• Doors should swing shut smoothly and seal without needing a hard push.
• If one door looks higher or the gap between doors is uneven, use the door alignment adjustment described in the 79572053118 owner's manual.

Common symptoms and what they usually mean

Symptom	Most likely cause	What to adjust
Refrigerator vibrates or feels wobbly	Cabinet not level side-to-side	Leveling leg on the low side
Doors pop open or do not self-close	Front not high enough	Raise both front leveling legs
Uneven gap between fresh food doors	Door height mismatch	Bottom hinge adjustable nut (door alignment)

Why it matters

Proper leveling reduces vibration and noise, helps the door gaskets seal consistently, and improves temperature stability by preventing warm air leaks from doors that do not close completely.

Last updated: February 2026

If your Kenmore Elite refrigerator model 79572053118 is warm at the bottom, the most common cause is restricted airflow; blocked vents or overpacked shelves keep cold air from circulating down into the fresh food section. Start by clearing vents, confirming temperature settings, and allowing time after any move or power interruption (up to 24 hours).

Quick checks that fix most “warm at the bottom” complaints

• Clear air vents in the refrigerator and freezer; move food packages away from vent openings.
• Reduce door openings; frequent or long openings let warm, humid air in and raise temperatures.
• Confirm controls are ON and not in demo mode; demo mode can leave lights and display working while cooling is disabled.
• Wait after installation or relocation; cooling can take up to 24 hours to stabilize.
• Check room temperature; this model is designed to run in roughly 55°F to 110°F ambient conditions.

What to check next (when airflow is clear)

If the bottom is warm but the top feels closer to normal, focus on components that move or manage cold air:

Symptom you notice	Likely area to inspect	What we do first
Top shelves cool, bottom shelves warm	Airflow path and damper operation	Repack food, clear vents, verify damper is opening/closing normally
Both sections trending warm	Cooling system or control settings	Verify settings, check for demo mode, allow 30 minutes after a defrost cycle
Frost buildup, weak airflow	Defrost system or fan airflow issue	Look for ice blocking vents and airflow channels

For model-specific diagrams and control details, use the 79572053118 owner’s manual.

Parts that commonly relate to poor cooling or uneven temperatures

These parts are not always the cause, but they are common suspects when basic airflow and settings checks do not solve the problem:

• Refrigerator air damper ADJ73252235 (controls how much cold air enters the fresh food section)
• Refrigerator evaporator ADL73341411 (part of the cooling system inside the cabinet)
• Refrigerator electronic control board EBR75234712 (manages cooling and defrost functions)

Why it matters

When the bottom of the refrigerator stays warm, food safety and freshness suffer first in the crisper and lower shelves. Restoring proper airflow and correct control operation prevents temperature swings, excess moisture, and premature spoilage.

Last updated: February 2026

Common problems on the Kenmore Elite refrigerator model 79572053118 include warm temperatures from airflow restrictions (dirty condenser coil, blocked vents), defrost system trouble that causes frost buildup, water and ice dispenser issues (filter or tubing related), and door sealing problems that let warm air in. See the troubleshooting section in the 79572053118 owner's manual for symptom-based checks.

Most common symptoms we see

• Refrigerator not cooling or freezer warming up
• Frost or ice buildup on the freezer back wall (defrost issue)
• Ice maker not making ice or dispensing slowly
• Water dispenser flow is weak or tastes/odors are present
• Water leaking or puddles under/inside the refrigerator
• Doors not sealing, sweating, or temperature swings

Quick checks you can do first (no tools)

• Confirm temperature settings; typical targets are 37°F fresh food and 0°F freezer.
• Make sure air vents inside both compartments are not blocked by food packages.
• Clean dust from the condenser area; restricted airflow can raise temps and run time.
• If water flow is slow, replace the genuine Kenmore refrigerator water filter 9690 AGF80300801 and dispense several gallons to purge air.
• Inspect door gaskets for gaps, tears, or areas that do not grip paper when the door is closed.

Problem-to-part map (what usually fixes it)

Symptom	Common cause	Parts that often apply on 79572053118
Warm temps, long run time	Dirty condenser, poor heat rejection	Refrigerator condenser coil ACG73645004
Frost buildup, warm fridge	Defrost sensing/control issue	Refrigerator defrost sensor assembly 6615JB2005R
Weak water flow	Clogged filter, kinked line	Genuine Kenmore refrigerator water filter 9690 AGF80300801, refrigerator water tubing MJU62070602
Door not sealing	Worn or warped gasket	Refrigerator door gasket, right ADX72930461
No ice or dispenser issues	Ice maker or dispenser drive problems	Ice maker assembly AEQ73110203, refrigerator auger motor EAU59551204

Why it matters

Most “not cooling” complaints start as airflow or heat-transfer problems (dusty condenser, blocked vents, frost buildup). Catching those early helps protect major components like the compressor and keeps food temperatures stable.

When an error code shows up

If the display shows an error code, use Kenmore 795 model bottom freezer refrigerator error codes to match the code to the most likely circuit or component before replacing parts.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end line, and the Kenmore Elite refrigerator model 79572053118 is built around premium features and service support compared to standard Kenmore models; the exact feature set still depends on the specific model configuration listed in the 79572053118 owner's manual.

What “high end” means for Kenmore Elite

In practice, “high end” usually shows up as a combination of design, features, and component quality.

• More feature-rich controls and convenience options (ice and water dispensing, alarms, locks)
• More advanced diagnostics and support features (some models include Kenmore Connect)
• Higher-cost core components (sealed system and compressor are premium repairs)
• More emphasis on fit, finish, and storage design (bins, drawers, door sealing)
• Longer warranty coverage on major sealed-system components (varies by component)

Model-specific proof points we can confirm for 79572053118

The documentation for this model includes Kenmore Elite limited warranty coverage that is typical of a premium tier:

Coverage item	What it covers	Time period (from purchase date)
Non-consumable parts	Defects in materials/workmanship	1 year
Sealed refrigerant system	Sealed system repair	5 years
Compressor	Compressor repair	10 years

This type of coverage is one reason Kenmore Elite is considered “high end” within the Kenmore lineup.

Why it matters when you’re shopping parts or planning a repair

A higher-end refrigerator like the Kenmore Elite 79572053118 often uses more specialized parts and assemblies. That affects both troubleshooting and cost.

Common “premium” system	Example part for this model	What it impacts
Water filtration	Genuine Kenmore refrigerator water filter 9690 AGF80300801	Water taste, flow, ice quality
Air filtration	Lg refrigerator air filter ADQ73214408	Odors and fresh-food compartment smell control
Sealed system	Refrigerator compressor TCA38091801	Cooling performance and long-term reliability

Quick tip: judge “high end” by what you use daily

We recommend checking these items first in the 79572053118 owner's manual because they reflect real-world value more than marketing terms:

• Ice maker and dispenser features
• Temperature control options and alarms
• Filter replacement intervals and reset steps
• Troubleshooting guide and diagnostic features

Last updated: February 2026

The cubic-foot capacity for Kenmore Elite refrigerator model 79572053118 is the total interior volume listed in the specifications for your exact unit. The most reliable place to confirm it is the specs section of the 79572053118 owner's manual or the model and serial rating label inside the fresh food compartment.

How to find the exact cubic-foot capacity on your refrigerator

• Open the fresh food (upper) door and locate the model and serial/rating label (commonly on a side wall).
• Look for wording such as “Total capacity”, “Total volume”, or “cu. ft.”.
• Check the specifications pages in the 79572053118 owner's manual.
• If your unit has a tech sheet stored behind the toe grille or rear access cover, it often lists total and compartment volumes.

What “cubic feet” means (and what it does not)

Spec term	What it describes	What can change it
Total capacity (cu. ft.)	Overall interior volume of refrigerator plus freezer	Model configuration and built-in components (ice system, air ducts)
Usable space	How much you can practically store	Shelf positions, bins, ice bin installed, bulky packaging

Why your usable space may feel smaller

• The ice compartment and ice bin reduce usable shelf space even when total capacity is high.
• Door bins and drawers take room but improve organization.
• If a bin is cracked or missing, storage becomes inefficient; replacing it can restore usable space (example: Kenmore refrigerator door bin AAP73252302).

Why it matters

Knowing the correct cubic-foot capacity helps you compare replacement refrigerators accurately, plan grocery storage, and choose organization accessories that fit the Kenmore Elite bottom-mount layout.

Last updated: February 2026