Kenmore 79579002901 refrigerator Parts

The exact cubic-foot capacity for Kenmore refrigerator model 79579002901 is listed on the model’s rating label and in the 79579002901 owner's manual. Most Kenmore 795-series bottom-mount refrigerators are commonly in the 20 to 22 cu. ft. range, but the rating label gives the precise number for your unit.

• Check the rating label inside the fresh food compartment (commonly on a side wall near the crisper area).
• Look for wording such as “Total volume”, “Capacity”, or “cu. ft.”
• Confirm you are reading the label for 79579002901 (not a similar 795 model).
• Use the specifications section in the 79579002901 owner's manual.

Kenmore model numbers that start with 795 identify the manufacturing source (commonly LG-built Kenmore units). The capacity is a separate specification and can vary widely even within the same 795 family.

Knowing the exact cubic feet helps when you are comparing replacement shelves and bins, planning food storage, and troubleshooting cooling complaints (overpacking can restrict airflow and cause warm spots).

Last updated: February 2026

Kenmore model numbers are read in sections: the first 3 digits identify the manufacturer code, and the remaining digits identify the specific product design and version. For your Kenmore refrigerator model 79579002901, the 795 prefix is the key identifier we use to match the correct parts and service information in the 79579002901 owner's manual.

Most Kenmore model numbers follow a predictable pattern that helps us identify the right parts (like a door switch, thermistor, or water inlet valve) and the correct diagrams.

• Prefix (first 3 digits): manufacturer code used for parts lookup
• Middle digits: the base design or model family
• Last digits: version, engineering changes, or feature variations
• Full model number: always use the entire number when ordering parts
• Serial number: separate from the model number; used for production date tracking

On most Kenmore bottom-mount refrigerators, the model/serial tag is typically located in one of these spots:

• Inside the fresh food compartment on a side wall
• Along the door frame near the gasket
• Behind the crisper drawers area
• On the back exterior panel (less common for daily access)

Use the full model number exactly as printed on the tag.

The prefix and full model number prevent wrong-part issues. For example, a refrigerator door switch or gasket can look similar across Kenmore models, but mounting style, wiring connector, and fit can differ by prefix and version.

If you are troubleshooting an error display, use the model family guide that matches your prefix, such as Kenmore 795 model bottom freezer refrigerator error codes.

Last updated: February 2026

On Kenmore refrigerator model 79579002901, a bad compressor usually shows up as poor or no cooling even though the unit has power, often with repeated clicking (start attempts) or a compressor that runs hot and never stabilizes temperatures. Confirming compressor failure requires a few basic checks and, in many cases, electrical testing.

• Fresh food and freezer both warm, and temperatures keep rising
• Compressor area is very hot to the touch after running (use caution)
• Repeated clicking every few minutes (start device trying to engage)
• Fridge runs constantly but never gets cold
• You hear fans running, but cooling does not improve
• Breaker trips or the unit shuts off shortly after trying to start

Many “bad compressor” complaints are caused by airflow, defrost, or start-device issues.

1. Condenser airflow: Make sure the condenser area is not blocked by dust or pet hair.
2. Evaporator fan: If the freezer fan is not running, cold air will not circulate. A common suspect is the refrigerator evaporator fan motor 4681JB1027N.
3. Defrost system: Heavy frost on the freezer back wall points to a defrost problem. The refrigerator defrost sensor assembly 6615JB2005C is one part that can affect defrost operation.
4. Door sealing: A poor seal can mimic cooling failure by letting warm air in.

Replacing a compressor is a major repair and often requires sealed-system tools and refrigerant handling. Ruling out common causes like a failed fan motor, defrost problem, or start device helps you avoid replacing the wrong part.

Use the wiring diagram and diagnostic guidance in the 79579002901 owner's manual to identify the correct test points, then have a qualified technician perform compressor and sealed-system tests (amperage draw, start components, and cooling performance).

Last updated: February 2026

Common Kenmore Elite refrigerator problems include warm temperatures (cooling loss), water leaks, ice maker or dispenser issues, noisy operation, and door sealing problems. For Kenmore model 79579002901, we start with airflow, defrost, and water-supply checks, then confirm symptoms against the 79579002901 owner's manual.

• Not cooling or weak cooling: dirty condenser coils, failed condenser fan, failed evaporator fan, frost buildup from a defrost problem
• Water under the fridge or in the freezer: clogged defrost drain, cracked or misrouted drain tube
• Ice maker or water dispenser not working: low house water pressure, clogged filter, failed inlet valve
• Lights not working or door alarm issues: failed door switch, loose wiring at the switch
• Doors not closing or sweating around the gasket: worn gasket, hinge wear, cabinet not level

1. Set temps to typical targets: 37°F fresh food and 0°F freezer.
2. Make sure vents are not blocked by food packages.
3. Listen for fans: evaporator fan noise inside, condenser fan noise near the compressor area.
4. Look for frost on the freezer back panel (a strong clue of a defrost issue).
5. Check for water trails or ice near the drain area.

Most “big” refrigerator complaints trace back to airflow, defrost drainage, or water supply. Fixing the root cause early helps prevent food spoilage, repeat icing, and strain on sealed-system components like the compressor.

• Kenmore 795 model bottom freezer refrigerator error codes
• How to diagnose a faulty refrigerator water inlet valve

Last updated: February 2026

On a Kenmore bottom-mount refrigerator like model 79579002901, the “bottom compartment” usually means the freezer compartment (the lower storage section with drawers). If you mean the area behind the lower front grille, that’s typically the machine compartment where cooling-system parts sit.

Depending on what you’re pointing to, you’ll hear different terms:

• Freezer compartment: the bottom drawer area where frozen food is stored (common on bottom-mount models)
• Crisper drawer: the lowest drawers in the fresh-food section for produce (inside the refrigerator section)
• Kickplate / toe grille: the vented panel at the very bottom front
• Machine compartment: the service area behind the kickplate or rear cover where major components run
• Drain pan area: where defrost water collects and evaporates (often near the bottom)

Using the right term helps us match symptoms to the right system. For example:

• Water on the floor often points to a clogged defrost drain or drain tube (see refrigerator drain tube 5251JA3003D)
• A door that will not close or sits low can involve hinge wear (see refrigerator door hinge bushing 4984JJ3003A)
• Warm temperatures can involve airflow or sealed-system issues, not the drawers themselves

For Kenmore 79579002901, the diagrams and section names in the 79579002901 owner’s manual are the best way to match what you see to the correct compartment name.

Last updated: February 2026

Most Kenmore refrigerators, including bottom-mount models like 79579002901, last 10 to 15 years with normal household use. With consistent maintenance (airflow, clean seals, and prompt repairs), it’s common to reach the upper end of that range and sometimes beyond; see the 79579002901 owner's manual for model-specific care guidance.

A refrigerator’s life is mostly driven by heat management, door sealing, and how hard the sealed system has to work.

• 10 to 15 years: typical average lifespan for most modern refrigerators
• Longer life: clean condenser area, stable temperatures, good door alignment
• Shorter life: clogged condenser area, torn gasket, frequent warm-air leaks, heavy ice buildup
• High-impact components: compressor, fans, defrost system, door gaskets

These steps reduce compressor run time and prevent moisture and frost problems.

• Keep the condenser area clean and unobstructed (dust and pet hair are common issues)
• Confirm doors close fully and don’t “bounce” open
• Keep food from blocking interior air vents
• Set stable temps (avoid frequent setting changes)
• Address water leaks or frost early to prevent secondary damage

If the interior light behavior is inconsistent, the lg refrigerator door switch 6600JB1010A is a common wear item that can also affect door-open sensing.

Once a refrigerator starts running hot or leaking warm air, the compressor and fans run longer, energy use rises, and cooling performance drops. Fixing small issues early often prevents major sealed-system repairs later.

Last updated: February 2026

Ice on the bottom of the freezer in your Kenmore refrigerator model 79579002901 almost always happens when defrost water cannot drain away; it pools under the evaporator, runs to the freezer floor, and freezes into a sheet. The most common fix is clearing the defrost drain and restoring proper drainage (often the drain tube).

• Clogged defrost drain from food particles, ice, or sludge
• Frozen drain opening from repeated partial defrosting
• Drain tube out of position, split, or restricted (water misses the drain path)
• Door left slightly open or a weak seal causing excess frost that overwhelms the drain
• Defrost system issue creating heavy frost that melts into too much water

1. Unplug the refrigerator and remove the freezer drawer/bins.
2. If you see a solid ice sheet, melt it with a hair dryer on low (keep heat moving; do not overheat plastic).
3. Locate the drain trough under the evaporator cover; flush the drain with hot water using a turkey baster.
4. If water backs up, clear the drain line (warm water, flexible tube, or gentle air pressure).
5. Check the door closing and gasket contact all the way around.

If the drain line is damaged or won’t stay clear, replacing the drain component is a reliable repair.

Helpful parts for this model include the refrigerator drain tube 5251JA3003D and, if you also have heavy frost issues, the refrigerator defrost sensor assembly 6615JB2005C.

When defrost water can’t drain, it refreezes and can block airflow, reduce cooling performance, and create recurring leaks and ice buildup. Fixing the drain restores normal defrost operation and helps prevent repeat freeze-ups.

For component locations, panel removal, and safe access points, follow the 79579002901 owner’s manual. For step-by-step guidance on puddles and drain-related leaks, use how to get rid of refrigerator puddles.

Last updated: February 2026

Water at the bottom of your Kenmore refrigerator model 79579002901 is almost always caused by a defrost drain problem (ice or debris clogging the drain) or a drain tube that is loose, split, or out of position, letting defrost water spill into the cabinet and onto the floor. Check the drain path and drain pan first using the 79579002901 owner's manual.

• Clogged defrost drain: Water cannot flow to the drain pan, so it backs up and leaks at the bottom.
• Drain tube issue: A loose, kinked, or damaged tube can dump water under the refrigerator; inspect the refrigerator drain tube 5251JA3003D.
• Drain pan problem: A cracked, shifted, or overflowing pan can leak during defrost.
• Door not sealing: Warm air causes excess frost, which creates more defrost water than normal.
• Ice maker or water line leak (if equipped): Slow drips can run down and pool at the base.

1. Unplug the refrigerator and remove food from the lower areas as needed.
2. Look for ice or standing water on the freezer floor or under crisper drawers (a strong sign of a drain clog).
3. Flush the drain with hot water (a turkey baster works well) until it flows freely to the drain pan.
4. Inspect the drain tube at the back for splits, kinks, or a loose fit; replace if damaged.
5. Check the door seal for gaps and clean it; poor sealing increases frost and defrost runoff.

Leaks at the bottom can lead to floor damage, moldy odors, and ice buildup that reduces cooling performance. Fixing the drain path early prevents repeat clogs and protects the evaporator area.

If you suspect a water-supply leak (dispenser or ice maker), follow the checks in how to prevent water dispenser and ice maker problems.

Last updated: February 2026