Can you still get parts for a Kenmore dishwasher?
Yes. We still carry replacement parts for Kenmore dishwashers, including the Kenmore 66513283K110, as long as the part is still being manufactured and available. The key is matching parts by your exact model number so you get the correct fit for items like pumps, valves, seals, racks, and filters.
- Use the full model number 66513283K110 (not a partial number from the door).
- Match the symptom to the system: draining, filling, heating, washing, or leaking.
- Compare the part description to what you see in the dishwasher (location and shape).
- If you are unsure, use the exploded-view diagrams in the 66513283K110 owner's manual.
- For installation-related parts (hose routing, mounting brackets), confirm requirements in the 66513283K110 installation guide.
Here are model-matched examples that are commonly needed for performance or leak issues:
| Problem you notice | Part that often fixes it | Example model-matched part anchor |
|---|---|---|
| Dishes not drying, water not heating | Heating circuit issue | Dishwasher heating element W10518394 |
| Dishwasher will not drain or drains slowly | Drain pump or drain path restriction | Dishwasher drain pump WPW10348269 |
| Not filling or fills too slowly | Water inlet valve | Dishwasher water inlet valve WPW10327249 |
| Poor wash coverage, food left behind | Spray arm or filter restriction | Dishwasher spray arm WPW10491331 |
| Leaks at the door | Door seal/strike wear or misalignment | Dishwasher door seal and strike kit W10542314 |
Kenmore dishwashers are built with model-specific mounting points, electrical connectors, and water-path designs. Ordering by the exact model number helps prevent returns and avoids issues like a drain hose that will not route correctly or a control that will not plug into your harness.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher like model 66513283K110 is usually worth it when the problem is a common wear item (leak, draining issue, poor drying) and the repair cost stays well below the price of a comparable new dishwasher. If multiple major components are failing at once, replacement makes more sense.
- If it’s one clear symptom (won’t drain, leaks, not heating), repair is typically cost-effective.
- If the dishwasher has rusted tub damage or repeated leaks from multiple areas, replacement is usually the better value.
- If you can do basic DIY safely (power off, water off), you often save most of the labor cost.
- If the issue is drying performance, start with rinse aid and airflow checks before replacing parts.
- If it’s not starting, confirm door latch, breaker, and water supply before buying parts.
| Symptom | Likely area | Example part for this model |
|---|---|---|
| Dishes cold, poor drying | Heating circuit | Dishwasher heating element W10518394 |
| Standing water in tub | Drain system | Dishwasher drain pump WPW10348269 |
| Not filling or fills slowly | Water supply | Dishwasher water inlet valve WPW10327249 |
| Leaks at door | Door sealing | Dishwasher door seal and strike kit W10542314 |
We recommend doing these basics first because they solve many “dead” or “not washing” complaints without replacing anything:
- Reset power at the breaker, then try a short cycle.
- Verify the door closes and latches firmly.
- Confirm the water supply valve is fully open.
- Start the shortest cycle and check for water in the tub after a couple minutes (a quick operational check described in the installation guide).
- Use rinse aid consistently; energy-efficient dishwashers rely on it for drying performance.
A targeted repair (one failed part) usually restores cleaning and drying for far less than the cost of a new unit, while avoiding the extra work of uninstalling and fitting a replacement dishwasher. Use the 66513283K110 owner’s manual for cycle behavior, drying tips, and operating checks.
Last updated: February 2026
How do I find the model number on my 66513283K110?
For your Kenmore undercounter dishwasher, the model number is printed on the appliance’s rating label, usually on the tub frame around the door opening. Open the door and look along the left or right edge of the frame for a sticker or metal tag; match it to 66513283K110.
- Open the dishwasher door fully and inspect the tub frame (the vertical edges).
- Check the top edge of the door opening (under the counter lip).
- Look near the door latch area for a label.
- Wipe the area with a damp cloth; labels can be hidden by residue.
- Use a flashlight to read small print.
Record the full model number and any additional identifiers so we can match parts correctly.
| What to capture | Example | Why it matters |
|---|---|---|
| Model number | 66513283K110 | Ensures correct diagrams and parts |
| Serial number | (varies) | Helps confirm production run |
| Brand | Kenmore | Narrows compatible components |
Kenmore dishwashers often have similar-looking doors and racks across multiple models. Using the exact model number (66513283K110) prevents ordering the wrong items like a drain hose, water inlet valve, or control panel.
- Check for a second label on the side of the door or inner door panel.
- Look for the original purchase paperwork or installation documents.
- Use our guide: how to find your appliance model number (and what it means for parts).
- Confirm the model number format before ordering from the parts list for 66513283K110.
For more model-specific identification and documentation, use the 66513283K110 owner's manual.
Last updated: March 2026





