Can you still get parts for a Kenmore dishwasher?
Yes. We still support parts for many Kenmore dishwashers, including model 66516033402, by matching your exact model number to the correct replacement parts (such as a heater, door seal, drain hose, or pump motor) and the right installation hardware.
How to make sure you order the right part
Use your full model number (66516033402) and confirm the part’s location in the diagrams and instructions in the 66516033402 owner's manual.
Before you buy, we recommend:
- Match the symptom to the system (heating, draining, leaking, washing)
- Verify the part name and ID, not just a description
- Check for included clamps, seals, or mounting hardware
- Compare your original part’s markings to the replacement
- Review any installation notes in the 66516033402 installation guide
Common Kenmore dishwasher parts customers replace
For the Kenmore 66516033402, these are examples of commonly replaced parts that are available:
| Problem you see | Part that often fixes it | Example part for this model |
|---|---|---|
| Dishes not drying, water not heating | Heater circuit issue | Dishwasher heater W10518394 |
| Water leaking at the door | Door sealing issue | Dishwasher door seal W10542314 |
| Dishwasher not draining well | Drain path restriction or leak | Dishwasher drain hose 8269144A |
| Loud humming, poor wash action | Motor or pump issue | Pump motor W10782773 |
Why it matters
Kenmore dishwashers are built with model-specific variations (controls, racks, seals, and wash system components). Using the exact model number and the correct part ID prevents fit issues, leaks, and repeat repairs.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher model 66516033402 is usually worth it when the problem is a normal wear part (seal, hose, heater) and the repair cost stays well below the price of a replacement; major electrical or motor repairs make the most sense when the unit is otherwise in good condition.
Quick way we decide: repair vs. replace
- Repair when the issue is a leak, poor drying, or draining problem tied to a serviceable part.
- Repair when the dishwasher cleans well overall and the tub and door are in good shape.
- Replace when multiple major failures stack up (motor plus control issues) or the repair quote approaches replacement cost.
- Replace when racks, tub, and door hardware are heavily worn and you are chasing repeated problems.
- Check coverage: this Kenmore manual describes warranty coverage periods for items like the electronic control and power supply board, and certain tub/inner door panel leak coverage on specific tub models; confirm details in the 66516033402 owner's manual.
Typical repair cost drivers (and common parts)
| Symptom | Common cause | Example part for this model |
|---|---|---|
| Not drying, water not heating | Failed heater or heating circuit issue | Dishwasher heater W10518394 |
| Water on floor at door | Worn door seal | Dishwasher door seal W10542314 |
| Won’t drain or drains slowly | Kinked/clogged drain line | Dishwasher drain hose 8269144A |
| Loud grinding, poor wash | Wash system component wear | Pump/motor diagnosis (varies) |
Why it matters
A targeted repair (like a heater, door seal, or drain hose) restores cleaning and prevents water damage for far less than replacing the dishwasher. Using the correct Kenmore 66516033402 parts also reduces repeat failures.
What to do before you spend money
- Look for leaks at the door and under the unit.
- Confirm the cycle and options you use (heated dry settings affect results).
- Clean the filter area and check for debris that can strain the pump.
- If you see an error code, match it first using Kenmore 665 model dishwasher error codes.
- Use the 66516033402 installation guide to confirm basics like drain routing and installation setup (poor installation can mimic a “bad dishwasher”).
Last updated: February 2026
Who makes Kenmore dishwasher 66516033402?
Kenmore model 66516033402 is a Kenmore-branded dishwasher built for Sears under the 665 model prefix; that prefix identifies Whirlpool as the manufacturer for this unit. For confirmation details such as the full model family and use and care information, check the 66516033402 owner's manual.
How we identify the manufacturer
Kenmore is a brand name, and different manufacturers build Kenmore appliances. On many Kenmore dishwashers, the first three digits of the model number indicate who built it.
- 665 prefix: Whirlpool-built Kenmore dishwasher
- Other Kenmore prefixes can indicate other manufacturers (varies by product line)
- The model tag is typically found on the tub frame or door edge
Quick reference
| What you have | What it means | Why it helps |
|---|---|---|
| Kenmore dishwasher model 66516033402 | Kenmore brand | Parts and manuals are organized by model |
| Prefix 665 | Whirlpool manufacturer | Helps match correct replacement parts |
Why it matters for parts and repairs
Knowing Whirlpool built this Kenmore 665-series dishwasher helps you choose compatible parts and repair procedures. For example, common Whirlpool-built dishwasher service items include the heater, door seal, and pump components.
- Heating issues can relate to the dishwasher heater W10518394
- Leaks at the door often point to the dishwasher door seal W10542314
- Drain problems can involve the dishwasher drain hose 8269144A
Last updated: February 2026





