Kenmore 59675232404 refrigerator Parts

Common problems we see on Kenmore refrigerators like model 59675232404 are weak or no cooling, frost buildup, water leaks, ice maker issues, and unusual noises. Many fixes start with basic maintenance (cleaning, airflow checks, and door sealing) before moving to parts like fans, defrost components, or controls; see the 59675232404 owner's manual troubleshooting section.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: dirty condenser area, failed evaporator fan motor, damper stuck, or control issues
• Frost or ice buildup: defrost heater or defrost system problem, door not sealing
• Water under the refrigerator: clogged/iced drain system, drip tray overflow
• Ice maker not making ice or bad-tasting ice: low water pressure, new plumbing taste, old ice, or water quality concerns
• Buzzing/clicking/humming: fan blade hitting ice, failing fan motor, or compressor start components

Quick checks we recommend first (no parts required)

1. Confirm settings: refrigerator about 37°F and freezer about 0°F (typical targets).
2. Make sure vents are not blocked by food packages.
3. Inspect door gaskets for gaps, rips, or areas that do not grip paper.
4. If ice tastes or smells off, discard old ice and wash the bin; new plumbing can temporarily affect taste.
5. If you have reverse osmosis, verify water pressure is adequate (low pressure can affect ice and water performance).

Parts that commonly solve these issues on this model

Symptom	Common part to check	Example part for 59675232404
Warm fridge section	Damper not opening/closing	Refrigerator damper control assembly WPW10196393
Noisy or warm freezer	Evaporator fan not moving air	Refrigerator evaporator fan motor WPW10128551
Heavy frost on back wall	Defrost heat not working	Refrigerator defrost heater WP12729128
No ice or slow fill	Water valve not opening fully	Refrigerator water inlet valve assembly WP2315576

Why it matters

Cooling, defrosting, and airflow work together. A small issue like a blocked vent or weak door seal can look like a major failure, and catching it early helps prevent food spoilage and repeat icing.

Last updated: January 2026

On a Kenmore bottom-mount refrigerator like model 59675232404, the “bottom part” is most often the base grille area and the machine compartment behind it, where key cooling components (such as the compressor, condenser, and drain pan) are located. For model-specific access steps, use the 59675232404 owner's manual.

Common names you may hear

People use different terms depending on what they can see or what they’re trying to fix:

• Base grille: the removable front grille at the very bottom
• Machine compartment: the enclosed area behind the grille that houses cooling components
• Toe kick: a general term for the lower front trim/grille area
• Bottom trim: trim pieces at the base (often referenced in door/hinge instructions)
• Drain pan: the pan underneath that catches defrost water

What’s typically located down there (and why it matters)

The bottom area is where heat is rejected and where water from defrosting often ends up. If airflow is blocked or parts are dirty, you can see warm temps, long run times, or water puddles.

• Compressor and condenser area helps remove heat from the refrigerant
• Condenser airflow path can be restricted by dust and pet hair
• Drain pan can overflow if the defrost drain is clogged
• Front rollers and brake foot affect door closing and cabinet stability

Quick “what you mean” guide

If you mean…	It’s usually called…	What you can do safely
The removable vented panel at the very bottom front	Base grille	Pull it off to inspect/clean underneath (unplug first)
The hidden area behind that panel	Machine compartment	Vacuum dust carefully; avoid bending coils/wiring
The part that catches water underneath	Drain pan	Check for cracks, overflow, or drain issues

Helpful model-specific tip (59675232404)

Our manual instructions for this style of Kenmore bottom-mount refrigerator describe removing the base grille by grasping it firmly and pulling it toward you; that’s the usual first step when you need access to the lower front area. See the 59675232404 owner's manual for the exact procedure.

Last updated: January 2026

The model number and serial number for your Kenmore bottom-mount refrigerator are printed on the model and serial number label on the product. Use that label to confirm you have model 59675232404 before ordering parts or using troubleshooting steps from the owner's manual.

Where to look on the refrigerator

On Kenmore bottom-mount refrigerators like model 59675232404, the model and serial number label is typically found in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• Behind the crisper drawers on an interior wall
• Along the door frame (hinge side) when the refrigerator door is open
• On the rear exterior panel (less common)

How to read and record it correctly

Write the information down exactly as shown on the label so we can match the correct diagrams and parts list.

• Copy the full model number (all digits)
• Copy the serial number
• Record the purchase date (helpful for service history)
• Take a clear photo of the label for reference

Quick checklist

Item	What to capture	Why it matters
Model number	59675232404	Ensures correct part fit and diagrams
Serial number	As printed on label	Helps identify production variation
Purchase date	Month/day/year	Useful for maintenance and records

Why it matters

Kenmore model numbers can look similar across bottom-mount refrigerator series. Confirming the exact model number from the label prevents ordering the wrong items (for example, an ice maker, control board, or door gasket that does not match your unit).

Last updated: March 2026