Kenmore Elite 11028032701 washer Parts

Kenmore Elite is a premium Kenmore product line that has been sold across multiple years (not a single “made in” year). For your Kenmore Elite washer model 11028032701, the exact manufacture date is typically tied to the serial number; we use the 11028032701 owner's manual for model identification and operating details.

What “Kenmore Elite” means

Kenmore Elite is a higher-feature tier within the Kenmore brand, used on several appliance types (including washers). That means:

• Different Kenmore Elite washers were produced in different production runs and years
• The model number (like 11028032701) identifies the design family and configuration
• The serial number is what usually pinpoints the specific build date for your unit

How to find the manufacture date on your washer

For most Kenmore top-load washers, the serial/model tag is found under the lid or around the lid opening.

• Unplug the washer for safety before reaching around the opening
• Lift the lid and look for a sticker or metal tag near the rim
• Write down the model number and serial number exactly as shown
• Use the serial number format to determine the production date (year and week/month)

Quick guide: model number vs. serial number

Item	What it tells you	Example for this washer
Model number	Which design/version you have	11028032701
Serial number	When your specific unit was built	Varies by unit

Why it matters

Knowing the build date helps us match the correct replacement parts and revisions for your washer, especially for wear items like the drive system and suspension. If you are chasing symptoms like vibration or off-balance spinning, parts such as the washer suspension W10820048 are commonly involved.

Last updated: February 2026

Your Kenmore Elite washer’s model number is printed on a rating label on the washer cabinet. For Kenmore Elite model 11028032701, the label is typically on the back of the control panel area or on the main cabinet; on some washers it can also be found around the lid or door opening.

Where to look on the washer

Check these common label locations first:

• On the back of the control panel (top rear of the washer)
• On the left or right side of the main cabinet near the bottom
• Under the lid area (top-load models) around the opening
• Around the door opening or door jamb (front-load models)
• On the rear panel of the washer cabinet

What the model number looks like

For this Kenmore Elite washer family, the model format often starts with 110 and may include a dot and additional digits (example shown in the documentation as 110.2803# where # indicates a color code). Use the full number from your label when ordering parts or checking troubleshooting steps in the 11028032701 owner's manual.

What you see on the label	What it means	What to use for parts
110.2803# (or similar)	Model series; # is a color digit	Use the complete model number from the label
11028032701	Full model number	Best match for diagrams and parts

Why it matters

We use the exact model number to match the correct Kenmore parts and diagrams because small differences (series, color code, or revision) can change items like the lid lock, drain pump, or suspension components.

Last updated: February 2026

To hard reset your Kenmore Elite washer model 11028032701, we recommend doing a power reset: cancel the current cycle, turn the washer off, then unplug it for 1 minute and plug it back in. This clears many control glitches and lets you restart a fresh cycle.

Recommended reset steps (safe and effective)

• Press STOP twice to cancel the cycle and drain the washer (if it is running).
• Press POWER to turn the washer off.
• Unplug the washer (or switch the breaker off) for 60 seconds.
• Restore power.
• Press POWER, select a cycle, then press START.

If you need the exact button behavior for canceling, draining, and restarting cycles on this model, follow the steps in the 11028032701 owner's manual.

What “reset” means on this model

This washer does not use a single dedicated “reset” button. A “hard reset” is typically one of the actions below.

Reset type	What it does	When to use it
Cycle cancel/drain	Stops the cycle and drains the tub	Wrong cycle selected, need to stop immediately
Power off/on	Reboots the control state	Display acting odd, cycle not starting
Unplug 60 seconds	Clears minor electronic glitches	Random beeps, unresponsive buttons

If the washer still will not start after a reset

• Confirm the lid is fully closed and the Lid Lock light behavior is normal.
• If you paused the cycle, wait for the Lid Lock light to turn off before opening the lid.
• Start a simple cycle (like Drain & Spin) to confirm the control responds.
• If the lid will not lock or unlock correctly, inspect the washer lid lock WPW10619844.
• If the tub will not drain after canceling, the drain pump is a common cause; check the pump-water W10536347.

Why it matters

A proper reset prevents repeated failed starts, reduces the chance of leaving water in the tub, and helps you separate a one-time control glitch from a real issue like a lid lock failure or drain problem.

Last updated: February 2026

Yes. Kenmore Elite is Kenmore’s higher-end appliance line, and the Kenmore Elite washer model 11028032701 is built and warrantied like a premium machine, with long-life core components (such as the stainless steel drum and plastic tub) and feature-focused design described in the 11028032701 owner’s manual.

What “high end” means for this washer

High end typically shows up as stronger build quality, better wash performance, and longer coverage on major components.

• Premium positioning within the Kenmore lineup (Elite tier)
• Feature and cycle options aimed at performance and fabric care
• Higher-cost core parts compared with basic washers (motor drive, basket, tub components)
• Longer limited warranty coverage on key tub/drum components (model-specific)

Warranty highlights (model 11028032701)

The warranty language for this model supports the “premium” positioning.

Coverage item	What it covers	Time period
Limited warranty	Defects in materials/workmanship	1 year
Limited warranty (drum/tub)	Stainless steel drum and plastic tub (parts)	10 years

For exact terms and maintenance requirements, use the 11028032701 owner’s manual.

When “Elite” still needs repairs

Even high-end washers can develop wear issues over time, especially in high-use homes. These are common repair areas we see on this platform:

• Drain problems (pump or restrictions); see pump-water W10536347
• Spin or vibration issues (suspension wear); see washer suspension W10820048
• Lid won’t lock or won’t start (lid lock); see washer lid lock WPW10619844
• Noisy operation or rough spin (bearing/shaft wear); see whirlpool washer tub bearing and drive shaft kit W10435302

Why it matters

Knowing Kenmore Elite is a higher-end tier helps set expectations: parts and repairs can cost more than entry-level models, but you typically get stronger performance and longer coverage on major components when the washer is installed, used, and maintained as directed.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years with normal household use and basic maintenance. For the Kenmore Elite 11028032701, keeping the washer clean, using correct load sizes, and replacing wear parts promptly are the biggest factors in reaching that lifespan (see the 11028032701 owner's manual).

Typical lifespan and what changes it

Most washers land in the same general range, but real-world life depends on how hard the machine works and how well it is maintained.

• Loads per week: more cycles equals more wear on bearings, suspension, and the drain system
• Overloading: increases stress on the basket, hub, and drive components
• Water quality: sediment can shorten inlet valve life and affect fill performance
• Detergent habits: too much detergent can cause residue and odors that require more cleaning
• Fast repairs: fixing small issues early prevents secondary damage

What to maintain to help it reach 10 to 15 years

The manual for this model includes washer care and cleaning guidance; following it reduces odor, vibration, and premature part wear.

• Run periodic cleaning cycles and wipe the lid and tub ring areas
• Check and replace water inlet hoses on a regular schedule
• Keep the washer level to reduce out-of-balance wear
• Clear drain restrictions if you notice slow draining or standing water
• Address unusual noise early (grinding can point to bearing or drive wear)

Common “end-of-life” symptoms and likely parts

When a washer is nearing the end of its service life, the failure is often in a few high-wear systems.

Symptom	Common cause	Example part for this model
Loud roar/grind in spin	tub bearing/shaft wear	Whirlpool washer tub bearing and drive shaft kit W10435302
Excessive shaking/banging	worn suspension	Washer suspension W10820048
Won’t drain or drains slowly	failing drain pump or blockage	Pump-water W10536347
Lid won’t lock/unlock	lid lock failure	Washer lid lock WPW10619844

Why it matters

A realistic lifespan helps you decide whether to repair or replace. If the washer is within the 10 to 15 year window, replacing a targeted part (like a drain pump, lid lock, or suspension) often restores reliable operation for years.

Last updated: February 2026

On Kenmore Elite washer model 11028032701, the F28 error code means the washer is losing communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU). This commonly shows up as a no-start, stop mid-cycle, or intermittent spin problem; follow the checks in the 11028032701 owner's manual.

What to check first (quick, safe steps)

• Press STOP/CANCEL to clear the display, then restart the cycle.
• Unplug the washer for 2 minutes to reset the control, then plug back in.
• Confirm the lid closes firmly and the lid locks during start; a lid issue can mimic control problems.
• Reduce the load size and redistribute items; severe imbalance can interrupt operation.
• Verify the outlet is providing steady power (avoid loose plugs or switched outlets).

Likely causes of an F28 communication error

F28 points to the “signal path” between the main control and the motor system. Common causes include:

• Loose or oxidized wiring connections between controls and the drive system
• Damaged wire harness
• Failed motor control or main control
• Drive system feedback problems (less common)

Parts that are often involved

Symptom you notice	What it often points to	Example part for this model
Intermittent start, random stopping	Harness or connection issue	Washer wire harness WP3407184
Won’t lock or won’t begin cycle	Lid lock circuit problem	Washer lid lock WPW10619844
Motor won’t run or spins erratically	Motor drive components	Stator WPW10419333

Why it matters

When the CCU and MCU cannot “talk,” the washer cannot safely control motor speed and direction. Stopping the cycle protects the motor, basket, and load from damage.

When replacement is more likely

If F28 returns quickly after a reset and basic checks, focus on wiring connections and the harness first, then move to motor-control related parts using the diagnostic guidance in the 11028032701 owner's manual.

Last updated: February 2026

The Kenmore Elite washer model 11028032701 capacity is provided in the specifications section of the 11028032701 owner's manual. This model is in the Kenmore Oasis 110.2803# family; use the manual’s stated capacity value as the correct cubic-foot rating for your exact unit.

Where to find the exact cubic feet in the manual

Look for the capacity line in the product specifications area.

• Open the 11028032701 owner's manual
• Go to the Specifications or Product features section
• Find the line for capacity (often shown as “cu. ft.”)
• Match your full model number 11028032701 to the model list (the manual also references 110.2803#, where # is the color code)

Quick capacity expectations for this washer type

If you are comparing washers or planning load size, most Kenmore Oasis top-load washers of this design fall into a mid-capacity range.

What you need	What to use	Why
Exact capacity for 11028032701	Manual’s capacity (cu. ft.) line	Correct for your specific model and configuration
Rough planning estimate	Mid-capacity top-load range	Helps compare to newer large-capacity models

Why it matters

Capacity affects load size, cleaning action, and out-of-balance control. Overloading reduces turnover and increases vibration, which can shorten the life of suspension and drive components.

Related parts that can be affected by overloading

If you notice banging, walking, or frequent off-balance stops, these parts are commonly involved:

• Washer suspension W10820048 (supports the tub and controls vibration)
• Drive hub (connects basket to drive system)
• Drain pump (helps clear water quickly during spin)

Last updated: February 2026