Kenmore 10655522400 side-by-side refrigerator Parts

For Kenmore side-by-side refrigerator model 10655522400, the most reliable way to confirm cubic-foot capacity is to look it up by model number in the specifications section of the 10655522400 owner's manual. If you need a quick estimate, you can calculate capacity from interior measurements.

Option 1: Find capacity in the manual (best)

Capacity is listed as a specification for the refrigerator. Use the model number 10655522400 and check the specs section in the 10655522400 owner's manual.

What to do:

• Locate the model/serial label inside the fresh food compartment (commonly on a side wall or ceiling area).
• Match the model number exactly: 10655522400.
• Use the manual specs to confirm total capacity (cubic feet).

Option 2: Calculate cubic feet yourself (good estimate)

If you cannot access the listed capacity quickly, we recommend measuring the usable interior space.

Steps to calculate:

• Empty enough items to measure safely.
• Measure width x height x depth of the usable interior space in inches.
• Multiply the three numbers to get cubic inches.
• Divide by 1,728 to convert cubic inches to cubic feet.

What you measure	Units	Convert to cubic feet
Interior volume	cubic inches	divide by 1,728

Tips to get a more accurate measurement

Interior capacity is affected by shelves, bins, and the ice maker housing, so measurements are always an estimate.

• Measure the fresh food and freezer sections separately, then add them.
• Measure to the inside liner, not to the front of shelves.
• Subtract obvious non-usable areas (large air channels, ice maker enclosure).
• Keep doors open briefly so temperatures stay stable.

Why it matters

Knowing cubic feet helps when you are comparing refrigerators, planning kitchen space, or choosing storage accessories like a crisper pan or shelf. It also helps set expectations for airflow and loading so the refrigerator cools evenly.

Last updated: January 2026

For Kenmore side-by-side refrigerator model 10655522400, the correct water filter is the base-grille cartridge Part #9020 (also referenced as T1RFKB1). Match the filter to your model number first, then confirm the cartridge style and cap fit using the 10655522400 owner's manual.

Quick ways to identify the right filter

• Check the model tag inside the fresh food compartment; it should read 10655522400.
• Look for a base grille filter location (low front of the refrigerator).
• Confirm the cartridge reference 9020 (T1RFKB1) in the manual.
• Keep and reuse the filter cap when changing filters; it transfers to the new cartridge.
• If water flow drops after installing a filter, the filter is likely full; replace it.

The filter that fits this model

For this model, the compatible replacement is:

What you need	What to look for	Example on this model
Filter cartridge type	Base grille water filter cartridge	Part #9020 (T1RFKB1)
Replacement part page option	Model-matched filter listing	Genuine Kenmore refrigerator water filter EDR3RXD1
Cap requirement	Cap must be moved to new filter	Keep the original cap

After you install the new filter

The manual procedure for clearing air and improving taste is to flush the system:

• Dispense and discard 2 to 3 gallons of water.
• Expect occasional spurting while air clears.
• If dripping occurs after a filter change, additional flushing helps.

Why it matters

Using the correct cartridge for 10655522400 protects water flow, reduces leaks at the filter head, and ensures the dispenser and ice maker get properly filtered water. A mismatched filter can restrict flow or fail to seal correctly.

Last updated: January 2026

On Kenmore model 10655522400, an ER FF code points to a problem with the freezer evaporator fan (the fan that moves cold air through the freezer and into the fresh food section). When that fan cannot run correctly, temperatures rise and airflow gets weak.

What to check first (quick, safe steps)

• Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
• Listen for the fan: open the freezer door and press the door switch; you should typically hear the evaporator fan running.
• Check for frost buildup on the freezer back wall; heavy frost often blocks the fan or indicates a defrost issue.
• Make sure vents are not blocked by food packages; poor air circulation can mimic a fan problem.
• Confirm the freezer door closes tightly; a leaking door gasket can cause excess frost and fan interference.

Common causes and the parts that usually fix it

ER FF is usually caused by a fan that is stalled, iced in, or not getting proper power.

Likely cause	What you may notice	What to do next
Ice buildup hitting the fan	Rattling, grinding, or fan stops after a while	Defrost and check the defrost system
Defrost system problem	Thick frost sheet on freezer back panel	Inspect defrost heater and defrost thermostat
Airflow restriction	Fridge warm, freezer cold spots	Clear vents, improve loading
Control or wiring issue	Fan never runs even after reset	Check harness connections and control diagnostics

If you find heavy frost, the defrost system is a strong suspect; for this model, common defrost-related parts include the refrigerator heater WP2323198 and the refrigerator defrost bi-metal WPW10225581.

Why it matters

That evaporator fan is what distributes cold air. If it is stalled or blocked by ice, the refrigerator side often warms up first, food spoils faster, and the compressor may run longer than normal.

Helpful references for this model

• Use the 10655522400 owner's manual for the control settings, airflow guidance, and the “Ensuring proper air circulation” and “Using the controls” sections.
• For model-family troubleshooting, the Kenmore 106 model refrigerator error codes guide is a good companion reference.

Last updated: January 2026