Craftsman 917280150 tractor Parts

On your Craftsman lawn tractor model 917280150, the engine model number is typically on an engine ID label or stamped into the engine metal, usually on the blower housing, valve cover area, or near the starter. Use the locations shown in the 917280150 owner's manual to confirm the exact ID points for your tractor.

Check these areas with the engine cool and the key removed:

• Top and sides of the engine shroud (blower housing)
• Valve cover area (often near the top of the cylinder head)
• Near the starter motor or starter solenoid mounting area
• Along the engine block near the muffler heat shield
• Under the hood on a label near the engine (sometimes on the frame close to the engine)

Write down the full engine identification exactly as shown; it is often more than one line.

The tractor model number (917280150) identifies the chassis and deck parts, but the engine model number is what you use to match engine-specific items like ignition components, fuel system parts, and tune-up parts.

If you are chasing a no-start and you hear clicking, the manual troubleshooting chart points to common causes like a weak battery, corroded terminals, wiring issues, or a faulty solenoid or starter. If you suspect the solenoid, the lawn tractor starter solenoid 582042802 is a common starting-system replacement part for this model.

Last updated: February 2026

For Craftsman lawn tractor model 917280150, the operator’s manual identifies it as a 17.5 HP riding lawn tractor (horsepower rated by the engine manufacturer). For the exact engine make and model used on your tractor, match the engine ID numbers on the engine to the specifications section in the 917280150 owner's manual.

We use the engine’s ID tag to confirm the correct engine family and service parts.

• Open the hood and locate the engine identification label (often on the blower housing, valve cover, or near the starter)
• Write down the model, type, and code (or similar ID fields)
• Compare those numbers to the engine information listed in the specifications section of the manual
• Use the engine ID when selecting tune-up parts (spark plug, air filter, fuel filter)
• If the tractor cranks slowly or only clicks, check battery connections and starting circuit components

The manual confirms key operating details that tie directly to the engine and drivetrain.

If the tractor will not crank or start, the issue is often in the starting or safety circuits, not the engine itself.

• Weak battery or corroded battery terminals
• Faulty ignition switch (a common no-crank cause) such as the lawn tractor ignition switch 532193350
• Failing starter solenoid such as the lawn tractor starter solenoid 582042802
• Safety interlock switch not made (brake pedal not fully depressed, PTO engaged, operator not seated)
• Leaving the key in a position other than STOP can discharge the battery

The correct engine identification ensures you buy the right maintenance parts and troubleshoot accurately. Many Craftsman tractors share similar horsepower ratings, but use different engine variants that take different filters, plugs, and adjustments.

Last updated: February 2026

Craftsman riding mowers and lawn tractors (including model 917280150) commonly use engines supplied by major small-engine manufacturers such as Briggs & Stratton, Kohler, and Kawasaki. The exact engine maker for your tractor is identified on the engine’s ID label and in the owner's manual.

Use these quick checks to confirm what engine you have before ordering tune-up or starting-system parts:

• Look for the engine ID label on the blower housing, valve cover, or near the starter
• Record the engine model, type, and code/spec numbers
• Match those numbers to the engine section in the owner's manual
• If your tractor has electric start, confirm the starting circuit components (battery cables, solenoid, ignition switch)
• Use the tractor model number 917280150 when cross-checking parts diagrams and listings

Even when two Craftsman tractors share the same tractor model number, the engine brand and spec can change which maintenance parts fit (air filter, spark plug, fuel filter) and which electrical parts are used for starting.

If you are troubleshooting a no-crank or click-no-start condition, these model-listed parts are often involved:

Knowing the engine manufacturer helps you get the right maintenance parts and speeds up troubleshooting. Your tractor’s manual also emphasizes safe servicing practices (for example, avoiding adjustments with the engine running and using extra caution around sharp mower blades). Refer to the owner's manual for the correct identification locations and service guidance.

Last updated: February 2026

Craftsman model 917280150 is part of the 917.28015 tractor series shown in the owner's manual. The exact build year is identified from the tractor’s serial number and date code on the product label (typically under the seat or on the frame), not from the model number alone.

Use the tractor’s product identification label to confirm the manufacturing date.

• Park on a level surface, set the parking brake, and remove the key
• Look for the product label under the seat, on the rear fender pan, or on the frame rail
• Write down the serial number and any date code printed on the label
• If the label shows a date code, record it exactly as printed (numbers and letters)
• Match the date information to the format described in the owner's manual

The manual cover lists Model No. 917.28015 for this Craftsman front-engine lawn tractor platform (17.5 HP, 38-inch mower deck, electric start, 6-speed transaxle). That identifies the series and configuration, but the serial/date code is what pins down the production year.

Knowing the exact year helps us match the correct parts diagrams and revisions for items like the mower deck, steering, and electrical system so you get the right replacement part the first time.

If you are ordering parts, confirming the serial/date code prevents mismatches, especially for:

• Electrical start components (for example, lawn tractor ignition switch 532193350)
• Starting circuit parts (for example, lawn tractor starter solenoid 582042802)
• Mower deck drive components (for example, lawn tractor blade drive belt 532193214)
• Deck hardware and assemblies (for example, lawn tractor mandrel housing 587819701)

Last updated: February 2026

The model number for this Craftsman riding mower is 917.280150 (often written without the dot as 917280150). You can confirm it on the product identification label and in the owner's manual for this tractor.

Check these common locations on Craftsman riding mowers like model 917280150:

• Under the seat (on the seat pan or fender area)
• On the frame near the engine compartment
• Near the rear hitch plate or transaxle area
• In the operator manual cover page and specifications section

Craftsman model numbers are sometimes shown with punctuation in manuals and labels.

Using the exact model number 917280150 helps us match the correct parts diagrams and replacement parts (like belts, ignition components, and deck hardware) so you get parts that fit your specific front-engine lawn tractor.

If you are confirming the model number to order parts, these are examples of parts commonly tied to this tractor’s systems:

• Lawn tractor ignition switch 532193350
• Lawn tractor starter solenoid 582042802
• Lawn tractor blade drive belt, 7/16 x 90-1/4-in 532193214

Last updated: February 2026