Kenmore 66513293K111 undercounter dishwasher Parts

Yes. We can still get replacement parts for many Kenmore dishwashers, including model 66513293K111, by matching the exact model number to the correct OEM-style components (many Kenmore dishwashers use Whirlpool-manufactured parts). Use the 66513293K111 owner's manual to confirm features and the correct part locations before ordering.

How to make sure you order the right part

• Match the full model number exactly: 66513293K111.
• Compare the part name and ID, not just a description.
• Check whether the issue is mechanical (rack, door) or water-related (fill, drain).
• Verify the symptom first (leak, no drain, poor cleaning) so you do not replace the wrong part.
• If you are installing a built-in dishwasher, follow the 66513293K111 installation guide for clearance, leveling, and securing steps.

Common Kenmore dishwasher parts that are still widely available

These are examples of parts currently listed for this model:

Problem you see	Part that often fixes it	Example part for 66513293K111
Upper rack won’t adjust or is loose	Rack adjuster components	Dishrack adjuster kit (W10712394) - dishwasher rack component by whirlpool W10712394
Dishwasher won’t drain	Drain pump or drain hose	Dishwasher drain pump WPW10348269; drain hose 8269144A
Poor wash coverage	Spray arm clogged or damaged	Dishwasher spray arm WPW10491331
Not filling with water	Water inlet valve	Dishwasher water inlet valve W11175771
Debris left in tub	Filter needs cleaning or replacement	Dishwasher filter W10872845

Why it matters

Kenmore is a brand label, and many Kenmore dishwashers were built by major manufacturers. When we use the exact model number, we can match you to the correct pump, motor, heater, racks, and door hardware so the repair fits and performs correctly.

Last updated: February 2026

To hard reset your Kenmore dishwasher model 66513293K111, we recommend doing a control reset first (power cycle) and then clearing the keypad sequence used on many Kenmore-built units. This restores normal operation after a glitch, stalled cycle, or unresponsive buttons.

Quick hard reset (most reliable)

• Turn the dishwasher OFF at the breaker (or unplug it if it uses a cord).
• Wait 3 minutes.
• Restore power.
• Close the door, then select a cycle and press Start/Resume.

Control-panel reset sequence (common Kenmore method)

If the dishwasher has Heated Dry and High Temp buttons, try this sequence with the door closed:

• Press Heated Dry
• Press High Temp
• Press Heated Dry
• Press High Temp
• Wait about 3 minutes for the reset/drain to finish

If your console labels differ, use the exact reset steps listed in the 66513293K111 owner’s manual.

What to check if it still will not reset

• Power supply: confirm the breaker is fully reset (OFF then ON).
• Door latch: make sure the door closes firmly; many models will not start or reset if the latch is not engaged.
• Stuck key: press each key once to ensure none are physically stuck.
• Drain issue: if it will not clear a cycle, check for standing water and a blocked drain path.

Symptom after reset	Most likely cause	What to do next
No lights, no response	No power to unit	Check breaker, outlet, cord connection
Lights on, won’t start	Door not latched or control not cleared	Re-latch door, retry sequence
Hums, won’t drain	Drain restriction or pump problem	Inspect hose and drain path

Why it matters

A proper reset clears a “hung” control state so the dishwasher can drain, accept selections, and restart a wash cycle normally. If the unit repeatedly locks up, the issue is usually power, door-latch sensing, or a drain restriction.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66513293K111 is usually worth it when the problem is a common wear item (drain hose, inlet valve, rack parts) and the total repair cost stays well below the price of a replacement. For major electrical or motor repairs, the decision comes down to total parts cost versus the dishwasher’s overall condition.

Quick way we decide: repair vs. replace

• Repair when the issue is a leak, drain problem, or poor cleaning tied to a single part.
• Repair when the tub and door seal areas are in good shape (no chronic leaking).
• Replace when multiple major systems are failing (wash motor, control, user interface).
• Replace when the repair requires several high-cost parts at once.
• Repair when you can safely DIY basic checks and a straightforward part swap.

Common repairs on this model that are often cost-effective

These are typical “single-failure” fixes that can restore normal operation:

• Not draining: dishwasher drain pump WPW10348269
• Not filling or filling slowly: dishwasher water inlet valve W11175771
• Poor drying or water not heating: dishwasher heater W10703867
• Weak spray or debris issues: dishwasher spray arm WPW10491331 and cleaning the filter area
• Rack problems: dishrack adjuster kit W10712394

Cost-to-value snapshot

Repair type	Typical symptom	Usually worth it?
Drain or fill repair	Standing water, no water entering	Yes
Heating/drying repair	Dishes wet, cool wash water	Often
Rack hardware repair	Rack won’t roll/adjust	Yes
Major electronic repair	Dead panel, erratic cycles	Sometimes
Motor/pump assembly	Loud grinding, no wash action	Depends

What to check first (before buying parts)

Use the install and operating checks to avoid unnecessary parts:

• Confirm the door closes tightly and latches.
• Check the house breaker or fuse.
• Verify the water supply valve is turned on.
• Run the shortest cycle; after about 2 minutes, open the door and confirm there’s water in the tub.
• If the unit was exposed to freezing, address winterization and water-line issues before troubleshooting further.

For model-specific operating steps and cycle checks, follow the 66513293K111 owner’s manual. For mounting, leveling, and “does not operate” checks, use the 66513293K111 installation guide.

Why it matters

A dishwasher repair is “worth it” when it fixes the root cause without creating repeat failures. Simple repairs (drain, fill, spray, rack) restore performance and prevent water damage; major electrical repairs only pay off when the rest of the dishwasher is solid.

Last updated: February 2026

Common problems we see on Kenmore undercounter dishwashers like model 66513293K111 include not starting (door not latched or power issue), poor cleaning (spray or filtration problems), not draining, and poor drying. Many issues are resolved by checking basics first, then inspecting the wash and drain system.

Quick checks first (most common fixes)

• Confirm the door is fully closed and latched; a loose latch can prevent starting.
• Check the house breaker or fuse, then verify the dishwasher has power.
• Make sure the water supply valve is turned on.
• If the Start/Resume light flashes, close the door within 3 seconds after pressing Start/Resume.
• Run the shortest cycle and check for water in the tub after about 2 minutes (a fast way to confirm filling).

Symptom-to-cause guide

Symptom	Most likely causes	Parts often involved
Won’t start	Door not latched, breaker tripped, cycle not set correctly	Door latch/switch, electronic control
Not draining	Clog in hose/air gap, failed drain pump	Dishwasher drain pump WPW10348269, drain hose
Dishes still dirty	Clogged filter, blocked spray arm holes, low water fill	Dishwasher filter W10872845, dishwasher spray arm WPW10491331
Poor drying	No rinse aid, heater issue	Dishwasher heater W10703867

Why it matters

Dishwashers depend on correct fill, strong spray circulation, and proper draining. A small issue like a clogged filter or a door that is not fully latched can stop the cycle entirely or leave dishes dirty, which can look like a bigger failure.

When to use the documentation

For model-specific operating steps, door behavior, and installation-related checks (water line position, drain routing, and door tension), follow the 66513293K111 installation guide and the 66513293K111 owner’s manual.

Last updated: February 2026

On Kenmore model 66513293K111, the model number is printed on the rating label located just inside the dishwasher door opening, typically along the left-hand side of the tub frame. The same label usually lists the serial number.

Where to look (quick checklist)

• Open the dishwasher door fully.
• Look along the left inside edge of the door opening (tub frame).
• Check for a paper or metallic rating label.
• Wipe the area with a damp cloth if the label is hard to read.
• Write down the full model number and serial number exactly as shown.

What the label helps you do

Having the exact model number lets us match the correct Kenmore dishwasher parts, diagrams, and repair instructions for your specific build.

You need	Why it matters	Example for this dishwasher
Model number	Ensures parts fit your exact design	66513293K111
Serial number	Helps identify production series and revisions	Listed on the same label

Why it matters

Kenmore dishwashers can look identical across multiple model series, but internal components like the water inlet valve, drain pump, racks, and control parts can differ. Using the rating label prevents ordering the wrong replacement part.

Related documentation

• Use the 66513293K111 owner’s manual to confirm label location and operating details.
• Use the 66513293K111 installation guide for installation and cabinet-opening requirements.

Last updated: February 2026

On your Kenmore 66513293K111 dishwasher, the Start/Resume button usually won’t start a cycle if the door is not fully closed and latched, if the cycle was not set correctly, or if power to the dishwasher is interrupted. This model also requires closing the door within 3 seconds after pressing Start/Resume.

Quick checks that fix most “won’t start” issues

• Press a cycle (for example, Normal), then press Start/Resume, then close the door firmly within 3 seconds.
• Confirm the door is closed tightly and latched (a loose latch prevents starting).
• Check the house circuit breaker or fuse for the dishwasher.
• Verify the water supply valve under the sink is turned on.
• If the Start/Resume light is flashing, press Start/Resume again and close the door within 3 seconds.

Reset and control-panel basics

A simple reset often restores normal operation after a power glitch.

• Turn off power at the breaker (or unplug) for 5 minutes.
• Restore power.
• Re-select the cycle, press Start/Resume, and close the door within 3 seconds.

If the console lights work but the dishwasher still won’t run, the issue is commonly the door-latch switch circuit or the user interface.

Parts that commonly cause a dead or unresponsive Start button

If the door is latching correctly and power is good, these parts are the most likely suspects:

Symptom	Most likely area	What to look for
Start/Resume light flashes	Door not closed in time	Close door within 3 seconds after pressing Start/Resume
No response to Start/Resume	User interface or wiring	Loose connector, moisture damage, worn keypad
Starts then stops quickly	Door latch switch circuit	Intermittent latch, misaligned strike

If you’re seeing intermittent button response or random beeping, the dishwasher user interface WPW10333393 is a common control-panel component involved.

Why it matters

A dishwasher that won’t start is often protecting you from running with an unlatched door or an incomplete cycle selection. Fixing the latch, power, or Start/Resume timing prevents nuisance no-starts and helps avoid mid-cycle interruptions.

For model-specific operating steps and indicator-light behavior, follow the 66513293K111 installation guide.

Last updated: February 2026