Kenmore 66517512202 undercounter dishwasher Parts

Your Kenmore dishwasher’s model number is printed on the rating label located just inside the door opening. For model 66517512202, you will use that model number (and the serial number) any time you order parts, look up diagrams, or schedule service; see the 66517512202 owner's manual.

On most Kenmore undercounter dishwashers, the rating label is easy to spot once you open the door.

• Open the dishwasher door fully.
• Look along the inner door frame (commonly the left side of the opening).
• Find the rating label with MODEL and SERIAL.
• Write the model number exactly as shown (all digits).
• Take a quick photo of the label for future reference.

The model number identifies the exact design family; the serial number helps match production details.

Kenmore dishwashers can look similar across many model numbers, but parts like a heater, door seal, or pump motor can vary by revision. Using the exact model number prevents wrong-part returns and helps your dishwasher run correctly.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66517512202 is usually worth it when the problem is limited to a single failed part (heater, drain hose, door seal) and the tub is sound; you typically spend far less than replacement and avoid a full reinstall. Use the 66517512202 owner's manual to match symptoms to likely causes.

We use these practical checkpoints before buying parts or scheduling service:

• One clear symptom (no heat, won’t drain, leaking) with otherwise normal operation
• No repeated failures of different systems in the last 12 months
• No tub damage or chronic door leaks that keep returning after seal replacement
• Parts are available (common wear items are in stock for this model)
• You can do basic checks safely (filter cleaning, hose inspection, visual wiring check)

These are frequent, targeted fixes on Kenmore undercounter dishwashers that can restore performance quickly:

• No drying or poor cleaning due to heating issues: consider the dishwasher heater W10518394
• Water on the floor at the front: inspect the dishwasher door seal W10542314
• Standing water in the bottom: check the dishwasher drain hose 8269144A for kinks, clogs, or a bad connection
• Dead or intermittent power: test the thermal fuse 8193762

A dishwasher replacement often adds hidden time and cost (removal, leveling, drain routing, and mounting). A focused repair keeps your kitchen setup intact and can extend the life of the wash system when the core tub and door structure are in good shape.

• Confirm the symptom in the troubleshooting section of the 66517512202 owner's manual
• Shut off power at the breaker before testing electrical parts
• Check for simple causes first (clogged drain path, loose hose clamp, debris in sump)
• Replace one failed component at a time and re-test

Last updated: February 2026

A Kenmore Elite dishwasher typically lasts 10 years with normal household use and basic maintenance. For model 66517512202, regular cleaning and prompt repair of wear items (seals, heater, pump) helps you reach that expected service life; see the 66517512202 owner's manual for care steps.

Most undercounter dishwashers land in a similar range, but these factors make the biggest difference:

• Water quality (hard water speeds up mineral buildup)
• How often you run it (daily use wears moving parts faster)
• Detergent and rinse aid use (too much can cause residue; too little can reduce cleaning)
• Filter and spray arm cleanliness (clogs reduce wash performance and strain the motor)
• Door sealing and leak prevention (small leaks can lead to bigger failures)

We recommend these habits for Kenmore dishwashers like 66517512202:

• Clean the interior and check for debris around the sump area monthly
• Run a cleaning cycle periodically to reduce grease and mineral buildup
• Inspect the door perimeter for gaps, tears, or flattening
• Keep the drain path clear and verify the drain hose routing is not kinked
• Address heating and drying issues early (poor heating can leave residue and odors)

If performance drops, these parts are often involved:

Knowing the typical lifespan helps you decide whether to maintain and repair or plan a replacement. On a 10-year-old unit, fixing a leak or drainage issue is often worthwhile; repeated motor or control problems can signal end-of-life.

Last updated: February 2026