Kenmore 66515112K210 undercounter dishwasher Parts

Yes, it’s usually worth repairing a Kenmore dishwasher like model 66515112K210 when the problem is a common wear item (drain, fill, heating, sealing) and the repair cost is clearly less than replacing the dishwasher. We typically recommend repair for units under 10 years old and replacement when multiple major components are failing.

Use these checkpoints before buying parts:

• Age: under 10 years old usually favors repair; 10 to 12+ years often favors replacement.
• Repair cost: repair when the total is under ~50% of the cost of a comparable new dishwasher.
• Failure type: leaks, no-drain, no-fill, poor drying are often straightforward; repeated electrical/control issues are usually not.
• Condition: rusted tub, heavy corrosion, or chronic leaks usually point to replacement.
• DIY comfort: if you can safely shut off power and water, many repairs are manageable with the right steps in the 66515112K210 installation guide.

These are frequent, fixable issues on undercounter dishwashers:

• Not draining: check the drain path; a failed pump is a common fix (see dishwasher drain pump WPW10348269).
• Not filling: verify water is turned on; a sticking valve can cause no-fill (see dishwasher water inlet valve W11175771).
• Poor drying or water not heating: a failed heater can cause weak drying and poor cleaning (see dishwasher heating element W10518394).
• Leaks at the door: worn seals are a typical wear item (see dishwasher door seal and strike kit W10542314).
• Poor cleaning: clogged filters or spray issues can reduce wash performance (see dishwasher filter W10872845).

A dishwasher like the Kenmore 66515112K210 is designed to run longer cycles for better cleaning efficiency; when a key component (heater, inlet valve, drain pump) is weak, you can see poor cleaning, standing water, or long cycle complaints. Fixing the root cause restores performance and prevents secondary damage.

Last updated: February 2026

For Kenmore undercounter dishwashers like model 66515112K210, the model number is printed on the dishwasher’s rating label; you can usually see it when you open the door and look around the tub opening. Use the full model number to match diagrams and parts exactly.

Check these common label locations first:

• Along the left or right side of the inner door frame (tub lip)
• On the top edge of the door, visible when the door is open
• On the side wall of the tub opening near the front
• Behind the lower toe-kick panel (less common, but possible)

Record the information exactly as shown on the label.

Kenmore dishwashers often share similar-looking doors, racks, and pumps across multiple models. Using the exact model number helps ensure parts like a drain pump, water inlet valve, or control board fit and connect correctly.

• Wipe the label gently with a damp cloth and mild soap; dry it
• Take a close-up photo and zoom in
• Copy letters and numbers exactly, including any suffixes
• Use our guide: how to find your appliance model number (and what it means for parts)

For model-specific label and identification details, check the owner's manual.

Last updated: March 2026

For Kenmore dishwasher model 66515112K210, the most commonly replaced parts are the ones tied to draining, filling, washing performance, and leaks. On this model, that typically means the drain pump, water inlet valve, filter, spray arm, door seal kit, and drain hose.

These are frequent wear items or failure points on many Kenmore undercounter dishwashers:

• Drain components (clogs, slow drain, no drain)
• Fill components (won’t fill, overfills, poor wash due to low water)
• Wash system items (poor cleaning, low spray, noisy operation)
• Leak-related seals and hoses (water on floor, moisture at door)

• Dishwasher drain pump WPW10348269
• Dishwasher water inlet valve W11175771
• Dishwasher filter W10872845
• Dishwasher spray arm WPW10491331
• Dishwasher door seal and strike kit W10542314
• Dishwasher drain hose 8269144A

Replacing the correct part restores normal wash pressure, proper heating and drying, and leak protection. It also prevents repeat failures caused by a restricted filter, kinked hose, or a weak pump.

• Confirm the symptom (drain vs fill vs wash)
• Inspect for simple causes (kinks, clogs, debris in filter)
• Use the exploded diagrams and part descriptions in the owner's manual
• Follow safe service steps from the installation guide before pulling the dishwasher out

Last updated: March 2026