Lawn Tractor Axle Flange Bearing (replaces 532009040, 5320090-40, 532124959, 577203109, 5920H, 5920H1, P-1246, P-1622) 9040H

/earing

For front wheels

Ease of Installation

Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

yes I would buy this again

worked great I

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Front axle bearings for Craftsmen riding mower.

Exact match to my mower and at a reasonable price.

Ease of Installation

Easy

Duration of Installation

30 minutes - 1 hour

Yes, I would recommend this to a friend

Tractor Bolt (Lug Nut)

I was sent the wrong part. I gave the yard tractor number and asked for the Bolts that attach the rear tires (manual does not show a part number for them) How do I return the FLANGE BRGS and get the correct order item?

Ease of Installation

Very Difficult

Duration of Installation

Less than 30 minutes

Very soft metal. Not great.

These are made of very soft metal. And you can fill the axle with grease and it won't spread between the flange and the axle. As a result, the flange begins to wear down. As it wears the axle grinds it down until you get wobbly wheels and the flange needs to be replaced. I am going to try a spray lube of some kind in order to try to mitigate this problem. Wish me luck.

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

New lower prices!

You can now get the Original Equipment or correct replacement on Sears Direct and have it delivered to your home for the same price as the other parts stores!

Ease of Installation

Very Easy

Duration of Installation

Less than 30 minutes

Yes, I would recommend this to a friend

Replacing the wheel bearing on my lawn tractor

I should have seen the tell-tale signs by the tire wear that the wheel bearing was wearing. It is very important to keep adding grease to the fittings that are on the hub assembly. I did need to improvise a means to remove the old wheel bearing, as it is a press fit into the rim hub. I used a 13/16" diameter extended socket and a sledge hammer to drive out the old bearing. No damage to the rim assembly occurred. The new wheel bearing installed by tapping it in with a wood block and a regular hammer. Normally this process would use a shop bench press, which I don't have. I would have liked to have gotten a sheet of instructions with the part, which it did not have. Overall, it was a simple fix that I should have done years ago. Now it runs like new again.

Ease of Installation

Moderate

Duration of Installation

1 - 2 hours

Yes, I would recommend this to a friend

Changes

When I had the wheels off the time was present and Flange BRG went on smooth

Ease of Installation

Moderate

Duration of Installation

30 minutes - 1 hour