Kenmore 10659599992 side-by-side refrigerator Parts

On Kenmore side-by-side refrigerator model 10659599992, the model number is printed on the model and serial number label located inside the refrigerator compartment, typically on an inside wall. You can use that label to record the model and serial number for parts and service reference (see the owner's manual).

Where to look (fast checklist)

• Open the fresh food (refrigerator) door, not the freezer door
• Look along the inside wall of the refrigerator compartment
• Check near the upper side walls and around the crisper area
• Look for a model and serial number label (often a white or silver sticker)
• Write down both the model number and serial number exactly as shown

What the label usually includes

Most Kenmore refrigerators list these items together on the same sticker:

Item on label	What it’s used for
Model number	Matching the correct parts list and diagrams
Serial number	Identifying production details for service history
Purchase date (you fill in)	Warranty and recordkeeping

Why it matters

We use the model number to match your exact door parts, ice maker parts, and water system parts. Even small model variations can change which items fit, such as the refrigerator water filter EDR5RXD1 or the ice maker assembly - refrigerator ice maker by whirlpool 4317943.

If you still can’t find it

• Remove items that block your view of the inside side walls
• Use a flashlight and look for a sticker with “Model” and “Serial”
• Check for a label that may be partially covered by a shelf edge

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 10659599992 are cooling problems, ice maker and water dispenser troubles, leaks, frost buildup, and door sealing issues. Many of these start with airflow restrictions, a clogged water filter, or a door that is not closing tightly; use the owner's manual troubleshooting section to narrow it down.

Most common symptoms and what usually causes them

• Not cooling or warm temperatures: dirty condenser coils, evaporator fan problems, blocked vents, or sealed-system/compressor issues
• Ice maker not making ice: water supply shutoff closed, frozen fill tube, inlet valve problem, or ice maker assembly failure
• Water dispenser slow or dripping: clogged or misinstalled filter, air in water lines after filter change, or supply line kink
• Water leaks/puddles: clogged defrost drain, loose water line connections, cracked tubing, or dispenser drip
• Excess frost/ice buildup: door gasket leak, frequent door openings, or defrost system component failure
• Noisy operation: fan blade hitting ice, worn fan motor, or items vibrating against the cabinet

Quick checks we recommend first (fast, high-impact)

1. Confirm the doors close fully and the gaskets seal all the way around.
2. Check for blocked air vents inside the fresh food and freezer sections.
3. If water flow is weak, remove and reinstall the filter; if flow improves with the filter removed, replace it.
4. If the dispenser drips after a filter change, flush and use normally; air typically clears within 24 to 72 hours.
5. Verify the home shutoff valve is open and the supply line is not kinked.

Common parts that solve common problems

Problem area	What fails most often	Example part for 10659599992
Water tastes bad or flow is slow	Water filter clogged	Refrigerator water filter EDR5RXD1
No ice or no water fill	Inlet valve not opening	Refrigerator inlet valve W10408179
Frost buildup, warm freezer	Defrost components	Refrigerator defrost bi-metal WPW10225581 and refrigerator heater WP2323198
Ice maker stops producing	Ice maker module/assembly	Ice maker assembly - refrigerator ice maker by whirlpool 4317943
Door not sealing, moisture/frost	Door gasket worn or warped	(Match gasket by color and door)

Why it matters

Cooling, ice, and water problems often share the same root causes: restricted airflow, poor door sealing, or a water supply restriction. Fixing the basic causes first prevents food spoilage, reduces frost buildup, and protects components like the compressor.

Last updated: February 2026

Water leaking from the bottom of your Kenmore 10659599992 side-by-side refrigerator is usually caused by a defrost drain problem (water cannot reach the drain pan), a water supply or dispenser leak, or ice buildup from a defrost system issue. Use the checks in the owner's manual to pinpoint the source.

Quick checks to find the leak source

Unplug the refrigerator before inspecting panels or wiring.

• Look for ice or frost on the freezer floor: this points to a clogged or frozen defrost drain.
• Check the drip pan area (under the cabinet): water should collect there during defrost; a cracked pan or overflow can look like a bottom leak.
• Inspect the water line and connections behind the unit: a loose fitting or kinked line can drip and run forward.
• Check the dispenser area: water can drip briefly after dispensing; holding the cup under the spout for 2 to 3 seconds after releasing helps.
• If you recently changed the filter: air in the lines can cause dripping for 24 to 72 hours; flushing helps.

Most common causes and what to do

What you see	Most likely cause	What we recommend
Water under freezer, sheet of ice on freezer bottom	Defrost drain clogged/frozen	Thaw the drain area, then clear the drain opening and tube
Water near back/bottom, especially after ice maker runs	Water supply connection or inlet valve leak	Check fittings and tubing; replace the valve if it seeps
Drips at dispenser after use	Normal drip or air in lines after filter change	Hold cup longer; flush several glasses of water
Repeated puddles plus heavy frost/poor cooling	Defrost system not clearing ice	Check defrost components and airflow; replace failed parts

Parts that commonly fix bottom-leak symptoms

These parts match Kenmore model 10659599992 and are often involved when leaks trace to the water system or defrost system:

• Refrigerator inlet valve W10408179 (leaks, weak fill, intermittent dripping)
• Refrigerator water tube 8201597 (cracks or pinholes in tubing)
• Refrigerator defrost bi-metal WPW10225581 (defrost control issues leading to ice buildup)
• Refrigerator heater WP2323198 (no defrost heat, ice buildup)

Why it matters

A small leak can turn into ice buildup, airflow blockage, and temperature swings. Fixing the root cause protects the evaporator area, prevents recurring puddles, and helps the ice maker and water dispenser work consistently.

Last updated: February 2026