Kenmore Elite 79048443410 electric built-in oven Parts

Yes. Kenmore Elite is Kenmore’s premium line, and the Kenmore Elite wall oven model 79048443410 is built and marketed as a higher-end option with upgraded cooking features and design compared to standard Kenmore models; exact feature sets still vary by model and configuration.

What “Kenmore Elite” typically means

Kenmore Elite models are positioned above basic Kenmore appliances. In wall ovens like 79048443410, that usually shows up as more cooking modes and convenience features.

Common “Elite” traits include:

• More advanced oven controls and cooking modes (bake, broil, convection)
• Better temperature management for more consistent baking results
• Premium fit-and-finish compared to entry-level lines
• More serviceable, modular components (sensor, control board, cooling fan)

How to confirm what’s “high end” on your exact oven

The fastest way to judge how premium your specific unit is, is to compare its feature list and control options to a standard model.

Check these items in your 79048443410 use and care guide:

• Available cooking modes (standard bake vs. convection bake)
• Rack system and rack positions (including glide rack instructions)
• Meat probe support (if equipped)
• Control features such as timers, temperature settings, and special modes

Parts that support “premium performance” (and what they do)

Higher-end ovens still rely on core components to hold accurate temperatures and run safely.

Part	What it affects	When it matters most
Range oven temperature sensor 5304504897	Oven temperature accuracy	Overbaking, underbaking, temp swings
Wall oven relay control board (316475806)	Heating and feature control	No heat, erratic operation
Cooling fan motor (5304529887)	Cabinet and control cooling	Overheating, fan noise

Why it matters

“High end” is most noticeable in day-to-day results: steadier temperatures, more even baking, and more cooking options. If performance is inconsistent, diagnosing key parts (like the temperature sensor) often restores the oven’s premium feel.

Last updated: February 2026

On Kenmore Elite model 79048443410, the model number is typically printed on a rating label around the oven door opening (the door jamb) or on the frame just behind the door. We use that exact number to match the correct wall oven parts and wiring information in the 79048443410 owner's manual.

Common places to check

Look for a paper or metal tag with a barcode and the full model number.

• Along the left or right side of the oven frame when you open the door
• On the front frame near the bottom edge of the oven cavity
• Behind the lower access panel or toe-kick area (built-in installations)
• On the side panel of the unit (more common when the oven is pulled from the cabinet)
• Near the power junction area, depending on installation style (check the 79048443410 installation guide for access points)

Quick ID tips (so you get the right parts)

Kenmore Elite wall ovens often show a model pattern similar to 790.4844* in documentation; your appliance label should show the full number 79048443410.

• Write the model number exactly as shown (no spaces)
• Take a clear photo of the label before ordering parts
• Use the full model number, not just the series (for example, not only “790.4844”)
• If the label is worn, check for a second tag nearby on the frame

Why it matters

The model number determines the correct electrical configuration, trim pieces, and service parts for your exact oven. For example, diagnosing heating issues may point to model-matched components like the range oven temperature sensor 5304504897 rather than a look-alike sensor.

What you should see on the label

Label item	Example for this appliance	Why it helps
Model number	79048443410	Ensures exact parts match
Series/family	790.4844*	Helps confirm you are in the right product family
Serial number	Varies	Useful for service history

Last updated: February 2026

For your Kenmore Elite 79048443410 electric wall oven, start by matching the symptom to the control display and basic operating checks (power, door position, preheat, rack placement). Many issues clear with STOP/CLEAR and a power reset; use the owner's manual “Before You Call” section for symptom-by-symptom fixes.

Quick checks we recommend first

• Press STOP/CLEAR to cancel the current cycle and clear temporary faults.
• If the control is beeping and shows an F or E code, turn off power for 5 minutes, then restore power and try Bake or Broil again.
• Confirm the oven door is fully closed; convection stops if the door is opened during convection cooking.
• For poor baking, preheat fully, center food, and leave space for air circulation.
• Use heavier, unwarped bakeware; lightweight pans often cause uneven results.
• Remove extra pans from the cavity; too many items can block airflow and heat.

Symptom-based troubleshooting

Symptom	Most common cause	What to do next
Control beeps with F/E code	Control detected a fault	STOP/CLEAR; power off 5 minutes; retry Bake/Broil
Convection fan not running	Door opened during convection	Close door; restart convection cycle
Excessive smoke while broiling	Grease not draining, foil used, or insert flipped	Use broiler pan insert ribs up, slots down; do not cover insert with foil
Poor baking results	Rack position, airflow, bakeware, preheat	Adjust rack position, preheat, use heavier pans, space cookware

When a part is likely involved

If the oven temperature swings widely, heats inconsistently, or triggers repeated fault behavior after a reset, these model-matched parts are common suspects:

• Range oven temperature sensor 5304504897 (helps the control regulate oven temperature)
• Wall oven relay control board 316475806 (switches power to heating circuits)
• Frigidaire range high-limit thermostat 318578506 (opens if overheating occurs)

Why it matters

Accurate temperature control and proper airflow are what make baking predictable. A simple door, rack, or broiler-pan setup issue can look like a “bad oven”, while repeated F/E codes after a reset often point to a sensor, thermostat, wiring, or control problem.

Last updated: March 2026