Kenmore 10658146801 side-by-side refrigerator Parts

For Kenmore model 10658146801, the model number is the key to getting the right parts and service information. We read it as a full identifier: the first 3 digits (106) are the source/manufacturer prefix, and the remaining digits identify the specific refrigerator design and version; always use the complete number when ordering parts.

Where to find the model number on a Kenmore refrigerator

On most Kenmore side-by-side refrigerators, the model and serial tag is typically located in one of these spots:

• Inside the fresh food compartment on a side wall
• On the ceiling of the fresh food compartment near the light
• Behind the crisper drawers (on the cabinet wall)
• On the door frame (hinge side)

For diagrams and model identification notes specific to this unit, use the 10658146801 owner’s manual.

How Kenmore model numbers are structured (quick guide)

Kenmore model numbers usually follow a predictable pattern:

• Prefix (first 3 digits): identifies the manufacturing source (for example, 106 is a common prefix used on many Kenmore refrigerators)
• Core digits: identify the base platform and feature set (ice and water, dispenser style, shelving layout)
• Trailing digits: identify revisions, color/trim variations, or production changes

Example breakdown

Example model number	What it tells us	Why it matters
10658146801	106 prefix + specific side-by-side configuration	Ensures correct parts match and fit
106.58146801	Same model with a dot format sometimes shown on tags	Enter it without punctuation when searching

Tips to avoid ordering the wrong part

• Match the model number exactly, including all digits
• Use the model number when selecting parts like a water filter, ice maker, or inlet valve
• If your tag shows punctuation (like a dot), search using numbers only
• Confirm the part fits your exact configuration before checkout

If you are replacing the water filter on this model, the manual lists the base grille filter as Part #9030, and a common replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.

Why it matters

Kenmore used multiple manufacturers and platforms across the same product type. Using the full model number (not just “Kenmore side-by-side”) prevents fit issues with parts like the ice maker, water inlet valve, and temperature control.

Last updated: February 2026

For Kenmore side-by-side refrigerators like model 10658146801, the typical cabinet opening (cut-out) width needed is 36 inches. That 36-inch requirement is the practical “width” most homeowners plan around for installation; confirm your exact clearances in the 10658146801 owner's manual.

What the manual says for model 10658146801

The installation guidance for this model calls out these key width and clearance points:

• Minimum cabinet cut-out width: 36 in (91.44 cm)
• Side/top ventilation clearance: 1/2 in (1.25 cm) on each side and at the top
• Wall clearance for door swing: 2 in (5.08 cm) minimum on each side (varies by setup)
• Extra width for crisper removal (when against an extended wall): add 18 in (45.72 cm), for a 54 in recommended opening

Quick planning guide (most common scenarios)

Installation situation	What to plan for	Why
Standard cabinet opening	36 in	Fits the refrigerator opening requirement
Next to a fixed wall	36 in plus side clearance	Helps doors swing fully
Against an extended wall and you want crisper access	54 in recommended	Allows crisper pans to slide out

Why it matters

Width planning is not just about “will it fit”; it affects door swing, airflow, and whether you can remove drawers and shelves for cleaning or service. A tight opening can also make it harder to connect the water line for the ice maker.

Related tip for water and ice setups

If your 10658146801 has a dispenser or ice maker, leave extra space behind the unit for the water line connection. If you are troubleshooting weak water flow or ice production, a restricted filter can be a common cause; the correct replacement for this model is the refrigerator water filter EDR3RXD1.

Last updated: February 2026

On a Kenmore side-by-side refrigerator like model 10658146801, the Er IF code points to an ice fan problem. The ice fan circulates cold air to the ice maker area; when airflow is blocked by frost or the fan circuit fails, the control detects it and triggers Er IF.

What to check first (fast, no parts)

• Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
• Check for frost or ice buildup around the freezer air ducts and fan cover; heavy frost can stop the fan.
• Make sure freezer vents are not blocked by food packages.
• Confirm the freezer door closes tightly and the gasket seals all the way around.
• Listen for the evaporator fan running when the freezer door switch is pressed.

Likely causes and the most common fixes

Er IF is usually caused by airflow restriction or a fan that is not running at the correct speed.

What you notice	Most likely cause	What we recommend
Ice maker area warm, fan noise changes, code returns	Frost/ice blocking airflow	Defrost the freezer and restore airflow; then monitor
No fan sound, freezer not cooling evenly	Failed fan motor or wiring issue	Inspect fan area and wiring; replace failed component
Fan runs but code persists	Control not sensing fan feedback correctly	Check connections; if needed, diagnose control circuit

Parts that can be involved

• Evaporator fan motor: refrigerator evaporator fan motor WP2315549
• Fan blade (if cracked/loose): refrigerator evaporator fan blade WP2169142
• Main control (less common): refrigerator microcomputer W11629974

Why it matters

The ice fan and evaporator airflow help keep temperatures stable. When airflow drops, you can get slow ice production, soft cubes, temperature swings, and frost buildup that can lead to more cooling problems.

Model-specific tip

Use the troubleshooting and control information in the 10658146801 owner's manual to confirm the correct airflow checks, control settings, and any diagnostic steps for your exact Kenmore configuration.

Last updated: February 2026

The cubic-foot capacity for Kenmore side-by-side refrigerator model 10658146801 is listed in the specifications section of the product literature for your exact unit. Use the 10658146801 owner's manual to find the official total capacity (refrigerator plus freezer) and any compartment breakdown.

Where to find the cubic-foot rating

In most Kenmore refrigerator manuals, capacity appears in a “Product specifications” or “Features and specifications” area, sometimes near installation clearances.

Check these common spots:

• “Specifications” or “Product data” section
• A “Performance data sheet” or product information page
• The model and serial label area description (some manuals reference it)
• Any included tech sheet (often stored behind the toe grille or rear cover)

How capacity is typically presented

Capacity is usually shown as total volume, and sometimes split between compartments.

Capacity label	What it includes	How it’s used
Total capacity (cu. ft.)	Fresh food + freezer	Comparing refrigerator sizes
Refrigerator capacity	Fresh food section only	Planning shelf and bin space
Freezer capacity	Freezer section only	Planning frozen storage

Why your “usable space” can feel smaller

Even when you know the rated cubic feet, the practical space you can load depends on the interior layout.

Common factors:

• Ice maker and bin reducing freezer room
• Shelf and bin configuration (deli/meat pan, door bins)
• Air vents that must stay clear for proper circulation
• Water filter housing taking shelf depth
• Large packaging shapes creating wasted gaps

Why it matters

Knowing the official cubic feet helps you compare Kenmore models accurately and plan kitchen storage; the layout and ice maker setup often matter more for day-to-day convenience.

Last updated: February 2026

Kenmore side-by-side refrigerator model 10658146801 is a full-size, 36-inch-class refrigerator. For planning, most units in this class are roughly 35 1/2 to 36 inches wide, with height and depth varying by hinge and handle style; confirm the exact dimensions in the 10658146801 owner's manual.

Typical size you can plan around

Use these common ranges to estimate fit before you measure your exact unit:

• Width: 35 1/2 to 36 in (cabinet width, not including clearance)
• Height: 66 to 71 in (depends on leveling legs and hinge covers)
• Depth: 29 to 34 in (varies most with handles and door thickness)
• Door swing: needs extra space beyond the cabinet width
• Ventilation: leave space around the refrigerator so it cools properly

Measurement	Typical range (approx.)	What changes it most
Width	35 1/2 to 36 in	hinges, trim
Height	66 to 71 in	leveling legs
Depth	29 to 34 in	handles, doors

How to measure your refrigerator accurately

Measure with a tape measure and include the features that affect fit.

• Measure width at the widest point (often the hinge side)
• Measure height from floor to top (include hinge cover if present)
• Measure depth from the back to the front of the handles
• Measure the door swing path so doors and drawers clear walls
• If you have an ice maker, allow room for the water line behind the unit

Why it matters

Correct sizing prevents installation problems like doors hitting walls, poor airflow that hurts cooling performance, and difficulty removing bins and drawers for cleaning or service.

Last updated: February 2026

Most Kenmore refrigerators average 10 to 15 years of service life. For your Kenmore 10658146801 side-by-side refrigerator, lifespan depends most on basic care (cleaning, good door sealing, and stable temperatures) and replacing wear items on schedule; see the 10658146801 owner's manual for model-specific care guidance.

Typical lifespan and what affects it

A refrigerator’s sealed system and compressor can run for many years, but day-to-day reliability is usually determined by airflow, defrost performance, and door sealing.

Common factors that shorten lifespan:

• Dirty condenser area causing high compressor run time
• Worn or leaking door gaskets letting in warm, moist air
• Poor airflow from blocked vents or overpacked shelves
• Skipped filter changes that reduce water flow and strain the inlet valve
• Repeated power interruptions or frequent temperature setting changes

Maintenance checklist that helps you reach the high end of the range

We recommend these habits for Kenmore side-by-side models like 10658146801:

• Clean the condenser area regularly (dust and pet hair are the biggest enemies)
• Confirm doors close and seal fully; correct sagging or misalignment early
• Keep freezer and fresh food vents clear to prevent warm spots and icing
• Replace the water filter on schedule; use the correct filter for this model
• Address cooling or defrost symptoms quickly (frost buildup, warm fridge, noisy fan)

Quick reference: what to replace vs. what to maintain

Item	What it does	Typical action
Water filter	Improves water quality and maintains flow	Replace periodically; use genuine Kenmore refrigerator water filter EDR3RXD1
Door gaskets	Keeps warm air out	Clean and inspect; replace if torn or warped
Evaporator fan	Circulates cold air	Diagnose if temps vary or fan is noisy
Condenser area	Rejects heat	Clean to reduce compressor stress

Why it matters

A refrigerator that runs hotter or longer than designed wears out key components faster. Simple upkeep (especially airflow and sealing) reduces compressor run time, helps temperatures stay stable, and prevents moisture-related frost issues.

Last updated: February 2026