Kenmore 11070012002 commercial dryer Parts

For Kenmore commercial dryer model 11070012002, the exact manufacture year is determined from the serial number on the rating plate (in the door well behind the door). Use the serial format shown in the 11070012002 owner's manual to decode the date and confirm the year.

Look in the same place the manual tells you to record service details:

• Open the dryer door and check the door well area
• Locate the model and serial tag (rating plate)
• Write down the serial number exactly as shown
• Record the date of purchase if you have it (receipt, service invoice)
• Keep the coin box key number noted as well if you service the coin mechanism

Kenmore model numbers like 11070012002 identify the product line; the serial number is what pins down the build date.

Knowing the correct year helps us match the right Kenmore parts and revisions for your dryer, especially for wear items and service parts like the dryer drum belt 341241 or the dryer operating thermostat WP3387134.

Last updated: February 2026

To find the exact model of your dryer, look for the model and serial number tag on the appliance itself, not the owner’s manual. On Kenmore commercial dryer model 11070012002, the tag is located in the door well behind the door.

Check these common locations first (in order):

• Door well behind the door (most common; this is where 11070012002 lists it)
• Inside the door opening on the front panel
• Back panel near the exhaust outlet or power cord entry
• Inside the service door on coin-operated models (meter case area)
• Side panel near the bottom edge

For diagrams and model-specific details, use the 11070012002 owner’s manual.

Record the information exactly as shown on the tag:

• Model number (example: 11070012002)
• Serial number (used to match production changes)
• Date of purchase (helpful for service history)
• Fuel type and ratings (especially important on gas dryers)

Using the exact model number from the dryer’s tag prevents ordering the wrong parts and speeds up troubleshooting. This is especially important on commercial and coin-operated Kenmore dryers, where small production changes can affect switches, thermostats, and burner components.

Last updated: February 2026

For Kenmore dryers, the most common display codes include PF (power failure) and several F-codes that point to a failed control, keypad, heater relay, or temperature sensor circuit. For model 11070012002, we use the troubleshooting steps and code definitions in the 11070012002 owner's manual.

These are widely used Kenmore Elite-style codes you may see on electronic-control dryers:

• PF: Power failure or power interruption during a cycle
• F:01: Main electronic control board problem
• F:02: Keypad or user interface problem
• F:20: Heater relay problem (heat control circuit)
• F:22 / F:23: Outlet thermistor (temperature sensor) circuit problem
• F:24 / F:25: Inlet thermistor (temperature sensor) circuit problem

Before replacing parts, we recommend these quick checks:

• Reset power: unplug the dryer (or switch off the breaker) for 1 minute, then restore power
• Confirm a solid power supply (loose plug, tripped breaker, or weak outlet can trigger PF)
• Clean the lint screen and check airflow; restricted venting can cause overheating symptoms
• If it is a gas model and you smell gas: follow the safety steps in the manual and contact your gas supplier
• If you are testing electrical parts, use a meter and follow our guide: how to use a multimeter to test electrical parts video

If the dryer runs but heat is inconsistent, these model-compatible parts are often involved:

Error codes help us avoid guesswork. A PF code usually points to power stability, while F-codes typically narrow the problem to a control, user interface, heater relay, or thermistor circuit so the right test comes before the right part.

Last updated: February 2026