CONFIRM THE PART FITS
Dryer Radiant Sensor (replaces 338906) WP338906
Part #WP338906
Part Information
This radiant sensor (part number WP338906) is for dryers.
Radiant sensor WP338906 monitors whether the igniter is hot enough to ignite gas to light the burner.
Unplug the dryer before installing this part and wear work gloves to protect your hands.
Frequently Used Together
- $24.86 |29% OFF MSRP : $35.00
- $27.04 |16% OFF Phone Price : $32.04
- $42.73 |10% OFF Phone Price : $47.73
- $44.11 |24% OFF MSRP : $58.00
- $19.58 |22% OFF MSRP : $25.00
- $17.42 |13% OFF MSRP : $20.00
- $51.04 |32% OFF MSRP : $75.00
- $21.34 |33% OFF MSRP : $32.00
- $209.09 |5% OFF Phone Price : $219.09
- $29.06 |15% OFF Phone Price : $34.06
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #11087984120 Kenmore dryer | 11087984120 | Bulkhead |
Model #MGDB835DC3 Maytag dryer | MGDB835DC3 | Bulkhead parts |
Model #11097583100 Kenmore dryer | 11097583100 | Bulkhead parts |
Model #LT5100XVW0 Whirlpool laundry center | LT5100XVW0 | 697436 burner assembly |
Model #11097292800 Kenmore dryer | 11097292800 | Bulkhead |
Model #KGYE760WAL1 KitchenAid dryer | KGYE760WAL1 | Bulkhead |
Model #KGYE760WWH1 KitchenAid dryer | KGYE760WWH1 | Bulkhead |
Model #11097283800 Kenmore dryer | 11097283800 | Bulkhead |
Model #11087407130 Kenmore dryer | 11087407130 | Bulkhead |
Model #11097592200 Kenmore dryer | 11097592200 | Bulkhead parts |
Reviews
you said it would fit my dryer.
your site said it was for this dryer,,his part did not fit my dryer. i now i m stuck with a part that does go on my gas dryer..i.t must be for a elect(. dryer mine is gas. )
none, lacombe la. 70445
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Works Great
Installation was easy, because, the sensor in my Kenmore dryer was accessible after opening access panel, located below the door. However, I had unplugged the dryer before opening the front panel.
NAC1, NJ
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Parts
you guys sent me the wrong part, I need to return it.
Undisclosed, Los Angeles, CA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Flame sensor
Easy to install one screw and two wires. The only bad part is you have to dismantle the front and remove the tub. Just part of the process.
Frank K, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 1 - 2 hours
Yes, I would recommend this to a friend
easy to install
unit was easy to install and acureate about 15 minutes
Richard N, phila pa.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Got the correct part & it got here fast.
Went in & tested fine; followed by a huge laundry load.
Monny, Carteret, NJ
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
the part was fine, the dryer too old to fix
easy to install but needed many other parts--opt for new machine waiting fund of part
weeks, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Easy to install
It was easy to install took 2 hours to remove all components and reverse the process great chance to clean all parts covered in dust and lint. regrease all roller bears .
Sawman 1, Mass
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour