Kenmore 11060712990 electric dryer Parts

For Kenmore model 11060712990 (a 29-inch wide electric dryer), the “size” most customers mean is the cabinet width: it is a 29-inch wide dryer. For exact overall height and depth, use the dimensions listed in the 11060712990 owner's manual.

Different sources use “size” in different ways. Here are the most common meanings:

• Width (cabinet size): 29-inch wide (this model)
• Overall dimensions: width, height, and depth together
• Capacity: drum volume (cubic feet)
• Load size wording: terms like “super capacity” vary by model and era

Getting the right “size” prevents fit issues in a laundry closet and helps you plan safe venting clearances. It also helps when ordering parts that relate to cabinet style, like the rear panel 280043 or door components.

• Measure width across the cabinet (not the control panel overhang, if any).
• Measure height from floor to the highest point.
• Measure depth from the back panel to the front (include the door if it protrudes).
• Allow extra space for the power cord and exhaust vent behind the dryer.
• Match your measurements to the specifications section in the 11060712990 owner's manual.

Last updated: January 2026

For Kenmore electric dryer model 11060712990, the most reliable way to choose the correct belt is to match the belt to your exact model number. This model uses the drum belt 341241, which is sized and designed to fit the drum and idler system for this dryer.

• Verify the model number on the model and serial number plate (typically on the cabinet opening) and match it to 11060712990.
• Compare your old belt to the replacement for:
  • Ribbed side vs smooth side
  • Approximate width
  • Signs of stretching, cracking, or glazing
• If the drum turns by hand but slips, squeals, or won’t tumble under load, the belt is a common cause.
• Use the belt routing diagram and access steps in the 11060712990 owner's manual.

• Belt condition: broken, frayed edges, shiny spots, or missing ribs
• Idler pulley: should spin freely and keep tension (a seized pulley can shred a new belt)
• Drum support: worn bearing surfaces can add drag and shorten belt life
• Lint buildup: heavy lint can overheat components and increase resistance

A belt that’s even slightly off in length or profile can slip, squeal, or fail early. Using the model-matched belt keeps proper drum speed, airflow, and drying performance.

Last updated: January 2026

WE12M29 is a GE dryer belt that’s typically 89 1/2 inches long (commonly listed as a 4-rib belt). For your Kenmore electric dryer model 11060712990, the correct belt is different; confirm the belt routing and size in the 11060712990 owner’s manual.

For this Kenmore model, we match parts by model number, not by a GE belt number.

• Use the model-matched belt: drum belt 341241
• Replace the idler at the same time if it’s noisy, wobbly, or worn: dryer idler pulley WP691366
• If the drum turns hard by hand, inspect drum support points and seals before installing a new belt

A belt that’s even slightly off in length or rib profile can slip, squeal, or break early. Using the model-correct drum belt also helps ensure proper tension with the idler pulley and smooth drum rotation.

• Unplug the dryer before servicing
• Confirm the belt ribs face the drum and the smooth side rides on the motor pulley
• Spin the drum by hand; it should rotate smoothly without scraping
• Clean lint buildup around the motor and blower area while it’s open

Last updated: January 2026

For Kenmore electric dryer model 11060712990, replacing the heating element typically costs $50 to $120 for the part, and $150 to $350 total if a technician does the repair (labor and service call included). Costs rise when a thermal cut-off or wiring also needs replacement.

• Heating element part: commonly $50 to $120
• Related safety parts (sometimes needed): $15 to $60
• Professional labor/service: commonly $100 to $250+
• Total installed: commonly $150 to $350

If your dryer overheated due to restricted airflow, the element can fail along with heat-safety components.

• Dryer element 279838 (main heat source)
• Cut-off kit 279816 (thermal safety devices that can open if overheating occurs)
• Dryer heating element wire kit 279457 (terminals/wires that can burn or loosen)
• Vent cleaning supplies or duct service (if airflow is restricted)

A new heating element can fail early if the dryer is running hot from poor venting. Our Kenmore manual also calls out that lint can build up inside the dryer and venting over time, so keeping airflow clear helps protect the heater and thermostats.

• Confirm the dryer has 240V power (a dryer can run but not heat on a tripped breaker leg).
• Clean the lint screen and check the vent for kinks or crushing.
• Compare symptoms: no heat, long dry times, or burning smell can point to different parts.
• Use the wiring diagram and access steps in the 11060712990 owner's manual.

Last updated: January 2026