Whirlpool GC3SHEXNS00 side-by-side refrigerator Parts

Yes. 30-inch-wide side-by-side refrigerators exist, but the Whirlpool GC3SHEXNS00 is designed for a 36-inch opening. If you need a true 30-inch-wide side-by-side, you will need a different model; this one will not fit a 30-inch cabinet cutout.

What the GC3SHEXNS00 requires (width and clearance)

Based on the installation dimensions for this Whirlpool side-by-side refrigerator, plan for:

• Opening width: 36 inches (91.5 cm)
• Door swing clearance: doors should open to at least 150°
• Side-wall clearance: allow about 13 1/4 inches (34 cm) on the freezer side and 16 1/2 inches (42 cm) on the refrigerator side (varies by model)

For the exact cutout and clearance guidance for your kitchen layout, use the GC3SHEXNS00 installation guide.

How to shop the right size (30-inch vs 36-inch)

When you are comparing refrigerators, focus on the cabinet opening and door swing, not just the advertised width.

• Measure the cabinet opening width at the front and back
• Measure depth to nearby walls, islands, and door trim
• Confirm door swing clearance so drawers and bins can pull out
• Verify water line location if you have an ice maker or dispenser
• Check hinge clearance and handle depth in tight spaces

Quick comparison

Feature	30-inch side-by-side	Whirlpool GC3SHEXNS00
Typical cabinet opening needed	30 inches	36 inches
Fit in a 30-inch opening	Yes	No
Door swing planning	Important	Required (150° minimum)

Why it matters

A refrigerator that is even a few inches too wide will not install safely, and insufficient door clearance can prevent the freezer and fresh food doors from opening far enough to access shelves, bins, and the ice maker.

Last updated: January 2026

On the Whirlpool GC3SHEXNS00 side-by-side refrigerator, the water filter is typically installed in the base grille area near the floor (front of the unit). Your GC3SHEXNS00 owner's manual also lists the standard replacement filter as part number 4396710.

How to find it quickly

• Look at the very bottom front of the refrigerator for the base grille.
• Check for a small filter door or round filter cap you can turn.
• If you see a cap, it may be the refrigerator water filter cap (black) WP2260518B.
• If the filter is not in the grille, check inside the fresh food compartment near the upper-right ceiling area (common on some Whirlpool side-by-side designs).
• Confirm the exact location and removal method in the GC3SHEXNS00 owner's manual.

What filter this model uses

The GC3SHEXNS00 uses a standard water filter listed as part number 4396710. If you are replacing the cartridge itself, use the model-matched refrigerator water filter EDR3RXD1.

Item	What it does	When you replace it
Water filter (4396710)	Reduces contaminants in drinking water and ice	About every 6 months (typical)
Filter cap	Locks the filter in place and helps seal the housing	If cracked, stripped, or missing

Why it matters

A correctly installed filter helps maintain water flow to the dispenser and ice maker, and it helps keep water and ice tasting clean. A loose cap or mis-seated filter can also cause leaks or weak dispensing.

After you locate the filter: basic replacement tips

• Dispense a few cups of water after installing a new filter to flush air and carbon fines.
• Check for drips around the filter area for the first few minutes.
• If water flow is still weak, verify the filter is fully seated and the cap is not damaged.

For step-by-step guidance, we recommend how to replace the water filter in a Whirlpool refrigerator.

Last updated: January 2026

The Whirlpool GC3SHEXNS00 side-by-side refrigerator is a 25 cu. ft. class model; the installation guide lists a 25' (694 L) size option for this platform. For the exact labeled capacity for your unit, confirm it in the GC3SHEXNS00 owner's manual.

What the documentation shows

The installation guide groups this refrigerator platform into two size classes:

• 23' (654 L)
• 25' (694 L)
• The GC3SHEXNS00 is associated with the 25' size class in the provided documentation excerpts.

Capacity reference table

Size class in install guide	Approx. liters	What it means
23'	654 L	Smaller cabinet size option for this design
25'	694 L	Larger cabinet size option for this design

Why you might see a different number online

Capacity can be listed a few different ways depending on the source:

• Total capacity vs. usable capacity (after shelves, bins, and ice maker)
• Marketing “cu. ft. class” rounding (for example, “25 cu. ft.”)
• Variations by configuration (ice maker installed, door bins, etc.)

Why it matters

Capacity affects food storage planning and also helps when comparing similar Whirlpool refrigerator models or choosing accessories like a water filter and ice maker components.

Last updated: January 2026

For the Whirlpool GC3SHEXNS00 side-by-side refrigerator, plan on a 36-inch wide cabinet opening and an opening height of about 69 inches (23 cu. ft. class) or about 72 inches (25 cu. ft. class). Use the GC3SHEXNS00 installation guide to match the correct height group and clearances for your setup.

Model-based size and clearance numbers

The installation specifications for this Whirlpool side-by-side platform call out a 36-inch opening width and two common opening-height groups based on capacity class.

• Minimum cabinet opening width: 36 in (91.5 cm)
• Opening height (23 cu. ft. class): 69 in (175.3 cm)
• Opening height (25 cu. ft. class): 72 in (182.9 cm)
• Door swing: allow doors to open to at least 150°
• Side-wall clearance for door swing: 13 1/4 in (34 cm) on the freezer side; 16 1/2 in (42 cm) on the refrigerator side

Quick reference table

Measurement you need for planning	Spec to use	What it affects
Cabinet opening width	36 in	Whether the refrigerator fits between cabinets
Opening height (23 cu. ft. class)	69 in	Top clearance and leveling range
Opening height (25 cu. ft. class)	72 in	Top clearance and leveling range
Side clearance for door swing	13 1/4 in and 16 1/2 in	Whether doors open fully without hitting a wall

How we recommend measuring your space

• Measure width at the top, middle, and bottom of the opening
• Measure height on both sides (floors can slope)
• Confirm depth including baseboards and trim
• Verify door swing space if a wall is next to either door
• Leave room behind for the water line and power cord routing

Why it matters

Correct opening width, height, and door-swing clearance prevent installation problems, help the refrigerator level correctly, and keep the doors sealing properly so the unit cools efficiently.

Last updated: January 2026