Installation guide
Owner’s manual
Error Codes
Can I run my dishwasher without the lower spray arm?
No. On Kenmore dishwasher model 66513049K110, the lower spray arm is a core wash component; running without it typically causes poor cleaning, can leave detergent undissolved, and can let debris circulate into the sump and pump area. Reinstall the spray arm before the next cycle.
- Dishes in the lower rack stay dirty because water is not being directed upward.
- Detergent may not dissolve or rinse away correctly.
- Food soil can settle in the sump area and increase the chance of clogs.
- The wash pump can cavitate (pull air) and get noisier.
- You can see standing water or poor draining if debris reaches the drain path.
- Power off the dishwasher at the breaker.
- Pull out the lower rack and confirm nothing is blocking the spray arm mount.
- Rinse the spray arm holes under a faucet; clear any mineral or food blockage.
- Make sure the spray arm spins freely by hand after reinstalling.
| Symptom | Most likely area | Example part for this model |
|---|---|---|
| Lower rack not getting clean | Lower spray arm clogged or missing | Dishwasher spray arm WPW10491331 |
| Grit or debris recirculating | Filter cup clogged | Dishwasher filter W10872845 |
| Poor drying after wash | Heater not heating | Dishwasher heating element W10518394 |
The lower spray arm is what creates the high-pressure spray pattern that lifts soil off dishes and pushes dirty water toward filtration. Without that spray pattern, the dishwasher can still fill and run, but it will not wash the way it was designed to.
For diagrams and the correct reassembly order for model 66513049K110, use the 66513049K110 installation guide.
Last updated: February 2026
Can you still get parts for a Kenmore dishwasher?
Yes. We still carry replacement parts for many Kenmore dishwashers, including model 66513049K110. The key is matching the exact model number to the correct component (for example a drain pump, water inlet valve, or heating element) so the fit and electrical connections are right.
Use the model’s diagrams and part lists, then cross-check symptoms to the most likely system.
- Match the full model number: 66513049K110
- Identify the failed system: fill, wash, drain, heat, or door seal
- Compare the part name and part ID before ordering
- Check installation requirements and clearances in the installation guide
- Use the 66513049K110 owner's manual for cycle features and basic troubleshooting
These are examples of parts available for this model that often solve everyday problems:
| Symptom | Likely part to check | Example part for this model |
|---|---|---|
| Dishes not drying, water stays cool | Heater circuit | Dishwasher heating element W10518394 |
| Won’t drain, standing water | Drain system | Dishwasher drain pump WPW10348269 |
| Won’t fill or fills slowly | Water supply | Dishwasher water inlet valve WPW10327249 |
| Poor cleaning, weak spray | Wash circulation | Dishwasher spray arm WPW10491331 |
| Leaks at the door | Door sealing | Dishwasher door seal and strike kit W10542314 |
Kenmore dishwashers are built with serviceable components, so replacing a single part (like a pump, valve, or seal) often restores normal washing and drying without replacing the whole dishwasher. Using the correct model-specific part also helps prevent leaks, wiring issues, and repeat failures.
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore dishwasher like model 66513049K110 is worth it when the problem is a common wear item (drain pump, inlet valve, heating element, door seal) and the tub and racks are still in good shape; these repairs typically restore cleaning and drying performance without replacing the whole unit.
Use this checklist first:
- Repair if the issue is draining, filling, heating, or leaking from the door area
- Repair if the dishwasher is otherwise quiet, washes well, and the tub is solid
- Replace if the tub is cracked, the unit is heavily rusted, or multiple major systems are failing
- Repair if you can confirm basics like water supply on and cycle set correctly (startup issues can be simple)
- Replace if repeated electrical/control problems keep returning after repairs
For model-specific operating and setup checks, follow the steps in the 66513049K110 installation guide.
These are frequent, targeted fixes that address the most common symptoms:
- Not draining: dishwasher drain pump WPW10348269
- Not filling or fills slowly: dishwasher water inlet valve WPW10327249
- Poor drying or water not heating: dishwasher heating element W10518394
- Leaks at the door: dishwasher door seal and strike kit W10542314
| Symptom | What we check first | Part that often fixes it |
|---|---|---|
| Standing water | Drain path, hose routing, pump | Drain pump |
| Dishes gritty | Filter and spray arm clogs | Filter or spray arm |
| Wet dishes | Rinse aid use, heater function | Heating element |
| Door drip | Seal condition, strike alignment | Door seal kit |
Modern energy-efficient dishwashers often run longer cycles and rely on proper water flow, heating, and rinse aid for drying. When one component (like the heater, inlet valve, or drain pump) is weak, performance drops fast, but a single-part repair usually brings it back.
- Confirm water is turned on at the shutoff valve
- Make sure the cycle is selected correctly and the door fully latches
- Clean the filter area and check for debris
- Verify the drain hose is not kinked and is routed correctly
- Use rinse aid for better drying results
Last updated: February 2026
