Maytag LDG9316AAM washer/dryer Parts

For a Maytag LDG9316AAM dryer, we determine age by decoding the date code embedded in the serial number. On many Maytag dryers, the date code uses two letters: the first letter indicates the year and the second letter indicates the month.

Where to find the serial number

You will typically find the model and serial tag in one of these places:

• Inside the door opening on the front panel
• On the door itself (edge or inner surface)
• On the cabinet frame just inside the door
• On the rear panel of the dryer

How to decode the Maytag serial date code

Once you have the serial number, look for the two-letter date code at the end (or near the end) of the serial number.

• 1st letter: manufacturing year
• 2nd letter: manufacturing month
• The remaining characters identify the production sequence

Quick example (format only)

Serial number ending	What it means
...AB	A = year code, B = month code
...LM	L = year code, M = month code

(Use your exact ending letters to match the year and month.)

Why it matters

Knowing the manufacture month and year helps us choose the correct Maytag-compatible parts and avoid look-alike replacements, especially for gas-heat components and wear items.

Parts that commonly depend on the correct model series

If you are troubleshooting heat or drum noise issues, these are examples of parts where correct identification matters:

• Holding coil 279834 (gas valve coil kit)
• Gas igniter 4391996 (ignites the burner)
• Dryer thermal fuse, 243-degree f WP307473 (opens if the dryer overheats)
• Dryer operating thermostat WP307249 (regulates operating temperature)

Last updated: February 2026

A Maytag dryer typically lasts 15 years. For your Maytag LDG9316AAM dryer, consistent airflow maintenance and timely replacement of wear parts (like drum support components and safety fuses) are the biggest factors in reaching that full service life.

What affects dryer lifespan the most

• Vent restriction (long runs, crushed flex duct, clogged hood) causes overheating and shortens component life.
• Overloading strains the drum support system and blower.
• Heat system cycling issues can overwork ignition and gas components.
• Lint buildup inside the cabinet raises temperatures and wear.
• Worn drum support parts increase friction and noise, accelerating failure.

Maintenance checklist we recommend

• Clean the lint screen every load.
• Check outside vent airflow monthly; strong, steady flow matters.
• Clean the full vent path at least once per year (more often with pets or heavy use).
• Keep loads to a reasonable size so clothes tumble freely.
• If you notice burning smells, long dry times, or repeated shutdowns, stop using the dryer and correct airflow before continuing.

Common “life-extending” parts on LDG9316AAM

These are parts we often see replaced to keep an older dryer running safely and quietly:

Symptom	Commonly involved part	Example from this model
Dryer won’t heat or stops heating	Safety cutoff	Dryer thermal fuse, 243-degree f WP307473
Squealing, thumping, rumbling	Drum support wear	Dryer drum bearing kit 306508
Poor airflow, loud blower noise	Blower wheel damage	Impeller Y303836
No ignition or intermittent heat	Ignition/sensing	Gas sensor WP338906

Why it matters

A dryer can “run” past its expected lifespan, but restricted airflow and worn support parts can turn into overheating, long dry times, and repeat breakdowns. Keeping the venting clear and addressing early noises usually costs less than waiting for a major failure.

Last updated: February 2026

On your Maytag LDG9316AAM dryer, the part number is printed on the part itself, not on the model tag. Start by finding the dryer’s model and serial tag, then match the part you’re replacing to the correct listing for LDG9316AAM.

Where to look on the dryer for the model and serial tag

Check these common Maytag dryer locations first:

• Inside the door opening on the front panel (door jamb area)
• On the back panel of the cabinet
• Along the lower front frame area (near the lint screen housing on some builds)
• Behind the control panel area (less common)

Where to find the part number on the actual part

Once you access the component, look for a stamped, molded, or printed identifier:

• Metal parts: stamped numbers on a flat edge or mounting bracket
• Plastic parts: molded numbers on the underside or inner rim
• Electrical parts: printed labels on the body (thermostat, fuse, sensor, coil)
• Knobs and trim: numbers molded on the back side

Quick examples for this model

What you’re replacing	Where the number is usually found	Example part you can match
No-heat gas ignition parts	Label on igniter or sensor bracket	Gas igniter 4391996
Dryer shuts off or won’t start (overheat protection)	Printed on the fuse body	Dryer thermal fuse, 243-degree f WP307473
Gas burner won’t stay lit	Printed on coil body	Holding coil 279834

Why it matters

Maytag dryers often use multiple versions of similar-looking parts across model series. Using the LDG9316AAM model number plus the part’s printed ID helps us match the correct replacement the first time and avoid fit or wiring differences.

Helpful tip before ordering

• Unplug the dryer (and shut off gas for gas-component checks)
• Take a clear photo of the part label and wire positions
• Compare the part’s shape, terminals, and mounting points to the listing

Last updated: February 2026