Dryer Blower Wheel (replaces 303836, Y312913) Y303836

Matched the original part exactly.

To replace the blower wheel the front of the dryer needs to be disassembled including the front of the duct assembly. Once this is completed it takes a couple of minutes to replace the Blower Wheel. The project will take a couple of hours.

Came Quick

Be sure to use new clamp, and check cleances before closing it up.

Easy to install, quick and easy

Dryer was up and running in 15 min didn't need any special tool or instructions

LIke a glove

Easy install, cause i had it apart about two weeks prior, took about 25 min. Works great just original part.

New blower

Part fit as original would have been nice if snap ring was included

Solved the noisy dryer problem

Installing the dryer blower wheel was a very quick job. Most of the time was spent removing cabinet screws, housing screws, and being careful not to disturb the wiring harness. A single C clip held the blower wheel to the shaft along with a clamp on the wheel to maintain tightness to the shaft. Old off, new on, done. Basic tools and a bit of patience was all the job required.

easy to install

Easy to take apart, just keep track of the screws in an organized way so you know where they go back.

easy to install

Remember to put back all the screws, as many screws have to be taken out in order to install this