$19.25 |
23% OFF MSRP : $25.00
CONFIRM THE PART FITS
Part Information
This burner igniter (part number 4391996) is for dryers.
Burner igniter 4391996 lights the gas burner to heat the dryer during the cycle.
Disconnect the power before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $27.88 |15% OFF Phone Price : $32.88
- $7.19 |58% OFF MSRP : $17.00
- $45.02 |10% OFF Phone Price : $50.02
- $12.27 |44% OFF MSRP : $22.00
- $20.07 |20% OFF Phone Price : $25.07
- $50.82 |9% OFF Phone Price : $55.82
- $299.88 |12% OFF MSRP : $340.00
- $20.49 |36% OFF MSRP : $32.00
- $78.97 |34% OFF MSRP : $120.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #LDG410 Maytag dryer | LDG410 | Inlet duct, gas valve, cone & extension |
| Model #DG510 Maytag dryer | DG510 | Inlet duct, gas valve, cone & extension |
| Model #GDG610 Maytag dryer | GDG610 | Inlet duct, gas valve, cone & extension |
| Model #DG810 Maytag dryer | DG810 | Inlet duct, gas valve, cone & extension |
| Model #GDG810 Maytag dryer | GDG810 | Inlet duct, gas valve, cone & extension |
| Model #GDG510 Maytag dryer | GDG510 | Inlet duct, gas valve, cone & extension |
| Model #MDG9316AXW Maytag dryer | MDG9316AXW | Gas valve (mdg9316awq/axw) |
| Model #LDG110 Maytag dryer | LDG110 | Inlet duct, gas valve, cone & extension |
| Model #LDG810 Maytag dryer | LDG810 | Inlet duct, gas valve, cone & extension |
| Model #DG610 Maytag dryer | DG610 | Inlet duct, gas valve, cone & extension |
Reviews
Works great and easy to install
Old igniter had cracked and wasn't working. unplugged and unscrewed it. Put the new one in and the dryer is working great again.
Mwpub, New Jersey
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install and was received on time as expect
Replaced the dryers igniter which was easy to do. Total work time was 20 minutes.
A g, Wisconsin
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Itgnitor replacement for Maytag Dryer.
Part matched installed part and functioned without issues after simple installation.
MikeH15, SE Wisconsin
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Dryer parts
Very simple process to get a needed part for my in laws dryer. Sears hometown stores are very helpfull
Dave t p, Middlefield Ohio
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Correct Part and easy to install
Since I had already partially disassembled the dryer during the troubleshooting process, the part replacement only took about a minute (it is one screw and an electrical connector plug, as you can see in the picture). This Whirlpool part was a suitable sub for my Maytag dryer, everything worked fine as soon as I swapped igniters. I highly recommend watching the Sears PartsDirect troubleshooting videos; even if you're an experienced appliance tech they'll help you find the bad part quickly!
Joe B, Aberdeen, MD
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes