Kenmore Elite 79577242601 refrigerator Parts

On Kenmore Elite bottom-mount refrigerator model 79577242601, the water filter cartridge is located inside the fresh food (refrigerator) compartment behind a small filter cover; you access it by opening the cover and twisting the cartridge knob counterclockwise to remove it (then twist the new one in).

In most bottom-freezer designs like this Kenmore 795 model, the filter is not in the freezer drawer. Look in the upper refrigerator section first.

• Open the refrigerator (top) doors and look along the upper interior wall or upper corner area for a filter cover
• Open the filter cover
• Turn the cartridge knob counterclockwise until it releases
• Pull the cartridge straight out (some water drips are normal)
• Install the new cartridge and turn it clockwise to lock

For the exact cover location and the correct reset steps for your control panel, use the 79577242601 owner's manual.

The manual procedure for this model includes shutting off the house water, purging pressure, and resetting the filter indicator.

A properly installed, fresh water filter helps maintain water flow to the dispenser and ice maker. When the filter clogs, you will usually see slower dispensing, smaller ice cubes, or reduced ice production.

Last updated: February 2026

On Kenmore Elite model 79577242601, the model and serial number label is located on the right-hand side of the refrigerator compartment (fresh food section). Open the refrigerator door and check the inside wall near the front edge; compare what you see to the format shown in the owner's manual.

We recommend checking these common label locations in this order:

• Right-hand side wall inside the refrigerator compartment (most common for this model series)
• Side wall just behind the crisper drawers (you may need to slide drawers out)
• Ceiling area inside the refrigerator compartment near the light housing
• Inside the freezer compartment side wall (less common)
• Behind the lower toe grille or kick plate (on some designs)

The identification label typically includes:

• Model number (for example, 795.7724 plus a color code on some labels)
• Serial number
• Electrical ratings (volts/amps)
• Manufacturing information

Using the correct number helps us match the right Kenmore refrigerator parts, diagrams, and troubleshooting steps.

• Wipe the label gently with a damp cloth; dry it so the print does not smear.
• Use your phone camera and zoom in; angled light often makes faded print readable.
• Write down the full model number exactly as shown, including any dots or suffixes.

Last updated: February 2026

A Kenmore Elite bottom-mount refrigerator like model 79577242601 typically lasts 10 to 15 years. Regular care (especially cleaning condenser coils and keeping door gaskets sealing) helps you reach the high end of that range and reduces the chance of expensive sealed-system problems.

Most refrigerators in this class run about a decade or more; the biggest factors are heat management, door sealing, and how hard the compressor has to work.

• Condenser coil cleanliness (dusty coils raise temperatures and run time)
• Door gasket condition (air leaks cause frost, moisture, and longer run cycles)
• Room temperature and ventilation (tight spaces trap heat)
• Usage patterns (frequent door openings, warm food loads)
• Water and ice system upkeep (clogs and leaks can create secondary damage)

For model-specific care and cleaning intervals, follow the maintenance section in the owner's manual.

Use this quick routine to protect the compressor and cooling system.

Some symptoms point to routine service, while others suggest a major repair decision.

• Often fixable: warm spots from blocked vents, dirty coils, doors not closing fully
• Often fixable: dispenser not responding (check switches like the lg refrigerator dispenser switch 6600JB3001C)
• More serious: repeated warm temperatures with long run times, loud compressor clicking, cooling that returns only after unplugging

Knowing the 10 to 15 year lifespan range helps you decide when maintenance is worth it versus when a major repair (especially in the sealed refrigeration system) no longer makes sense for your household.

Last updated: February 2026

For Kenmore Elite refrigerator model 79577242601, the model number by itself does not reliably encode the exact cubic-foot capacity. The dependable way is to look up the capacity in the specifications section of the owner's manual, or calculate an estimate by measuring the usable interior space.

• Check the specifications in the owner's manual (this is the most accurate method).
• Look for the model/serial label inside the fresh food compartment (commonly on the right-hand side wall); use that exact model number when matching specs.
• If you need a quick estimate, measure the interior and calculate cubic feet (details below).
• If you are comparing sizes, remember capacity is total usable volume (refrigerator plus freezer), not exterior dimensions.

1. Empty the compartment you are measuring.
2. Measure usable interior:
   • Width (inches)
   • Depth (inches)
   • Height (inches)
3. Multiply: W x D x H = cubic inches.
4. Convert to cubic feet: cubic inches ÷ 1728 = cubic feet.

Knowing cubic feet helps us match the right storage expectations and compare models fairly. It also helps when planning organization accessories and understanding how much airflow space you need around food for consistent cooling.

If shelves or drawers are misaligned or not sliding correctly, the refrigerator can feel smaller and doors may not seal well. These model-compatible parts can help restore normal operation:

• Lg refrigerator drawer track 4975JJ2028D
• Refrigerator crisper drawer slide rail 4975JJ2003F
• Refrigerator door gasket ADX73410707

Last updated: February 2026

Common problems we see with the Kenmore Elite 79577242601 bottom-mount refrigerator include warm temperatures from airflow issues (dirty condenser coils or doors not fully closed), doors not sealing or closing, normal but concerning defrost noises, slow or no ice production, and water leaks tied to drain or water-line issues. Use the owner's manual troubleshooting charts to match symptoms to checks.

• Not cooling or slow cooling: dirty condenser coils, doors not fully closed, recent plug-in (up to 24 hours to cool)
• Refrigerator not operating: unplugged cord, tripped breaker, control set to OFF, unit in defrost (wait about 30 minutes)
• Noisy operation: sizzling/dripping during defrost, condenser fan airflow, water running to the drain pan
• Doors will not close completely: refrigerator not level, food packages blocking, bins/shelves out of position, sticky gaskets
• Ice maker slow/no ice: freezer not cold enough yet (allow 24 hours after hookup), door left open, restricted water supply

• Confirm power and controls are set correctly (not OFF)
• Allow full cool-down time after restart or first plug-in (up to 24 hours)
• Push doors firmly shut; reseat drawers, shelves, and bins
• Clean condenser coils to restore heat transfer
• If doors are hard to open right after closing, wait 5 minutes for pressure to equalize

• Door-ajar or light issues: lg refrigerator door switch 6600JB1010A
• Defrost-related cooling symptoms: refrigerator defrost sensor assembly 6615JB2005C

Fixing airflow, door-seal, and defrost issues early prevents food spoilage, reduces energy use, and avoids extra wear on the compressor and fans.

Last updated: February 2026