Kenmore 11098752796 stacked laundry center Parts

The Kenmore stacked laundry center model 11098752796 uses a 24-inch wide gas dryer, and dryers in this size class typically run about 3.4 to 3.8 cu. ft. capacity. For the exact cubic-feet rating for your unit, check the specifications section in the 11098752796 owner's manual.

Use these quick checks to find the official number for your Kenmore 11098752796:

• Look in the Specifications or Product features section of the 11098752796 owner's manual.
• Check the model and serial label on the laundry center cabinet (often inside the dryer door opening or on the frame).
• Compare the listed drum size or capacity wording (some manuals list it as “cu. ft.”).
• If you are measuring for load size, use the drum volume guidance below to avoid overloading.

Because this is a 24-inch wide laundry center dryer, the capacity is usually smaller than a full-size 27-inch dryer.

Dryer capacity affects drying time, wrinkling, and airflow. When the drum is packed too tightly, clothes tumble less, heat and air do not move well, and loads can come out damp.

Capacity is only one factor. These checks fix most “still damp” complaints:

• Clean the lint screen before every load.
• Confirm the exhaust vent is not crushed, kinked, or clogged.
• Avoid overloading; leave enough room for clothes to tumble freely.
• If the dryer is not heating consistently, gas-heat components can be involved (for example, a weak dryer valve coil kit 279834 can cause intermittent heat).

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For a Kenmore stacked laundry center like model 11098752796, regular care (proper loading, cleaning, and ventilation for the dryer section) helps you reach the longer end of that range; heavy use and poor maintenance shorten it. See the 11098752796 owner's manual for the maintenance schedule and operating tips.

• Load size and balance: overloading strains the drive system and suspension.
• Water quality: hard water speeds up mineral buildup in valves and hoses.
• Drain health: coins, lint, and debris stress the pump and can cause slow draining.
• Detergent use: too much detergent can cause residue and odors.
• Ventilation (laundry center setups): restricted dryer venting increases heat and moisture in the cabinet area.

Many “end of life” complaints are actually a few common parts wearing out.

If your washer won’t drain, the washer drain pump WP3363394 is a common fix when the pump is leaking, seized, or noisy.

• Clean the dryer lint screen every load and keep venting clear.
• Use the correct water level and avoid packing the basket tight.
• Check fill hoses for bulges or cracking and replace as needed.
• Level the laundry center to reduce vibration and drive wear.
• Follow the cleaning and care guidance in the manual.

A washer that is maintained and kept level runs with less vibration, drains faster, and puts less stress on the motor, coupling, and clutch. That directly improves reliability and helps you get the full expected service life.

Last updated: February 2026

The Kenmore 11098752796 is a 24-inch-wide stacked laundry center with a compact top-load washer; washers in this class typically measure about 2.3 to 2.6 cubic feet. For the exact published capacity for your unit, confirm it in the 11098752796 owner's manual.

Capacity is usually listed in the specifications section (sometimes near dimensions, electrical, and water requirements).

• Check the specifications or features pages for “capacity” or “cu. ft.”
• Look for terms such as washer basket volume or washer capacity
• Keep the model format consistent; the manual may show it as 110.98752 (same model family)
• If you only see dimensions, use the 24-inch width as confirmation you are in the compact-capacity range
• Compare washer capacity separately from the dryer; dryer drum size is a different spec

Use this as a practical guide when deciding load size and cycle selection.

Correct capacity helps prevent overloading (poor agitation, off-balance spinning) and underloading (wasted water and energy). It also reduces strain on drive and drain components such as the coupling 285753A and the pump.

Last updated: February 2026