Washer Clutch 285785

This was the exact part I needed to fix the lack of spin cycle issue on my old Series 70 washer. All the parts I needed were included and only took a couple of hours (with some YouTube help) to replace and get back up and running.

Spin cycle didn’t work good,replaced clutch with factory parts

My wife said the clothes were really heavy and dripping wet after the wash. I had checked and it seemed like the washer was spinning. Turned out that the clutch was slipping and not spinning the tub as fast as it should- especially when it had a heavy load. This fixed it well! Be sure to watch a video on replacement. Not too hard if you have directions to follow.

sears has been providing great service and products to our family for decades. this installation was super easy when following youtube video instructions. replaced because spin cycle no longer worked. although i don't think the clutch really needed replacing. instead i suspect the culprit for the malfunction was worn teeth on the gear mechanism in the transmission which i replaced and since i had the machine apart i figured i should replace the clutch as well. after breaking down the machine and cleaning it all up the machine runs like new! i did have difficulty getting the drive block off but you don't need to remove that to replace the clutch.

This slid on the new gear case and works perfectly.

This was exactly what I needed and is working perfectly

The part fit perfectly... I found a you-tube video that really helped. Just tip the whole thing on its side (in the garage... you'll probably gonna leak some nasty water!) and you'll have really nice access to everything you need.

It took 15 minutes to install the washer clutch and spinning like new.