Kenmore 10654606300 side-by-side refrigerator Parts

Yes. We still support Kenmore appliances with replacement parts, and for Kenmore model 10654606300 you can order common service parts (ice maker, water inlet valve, defrost parts, door hardware) using the model number to match the correct fit. Use the 10654606300 owner's manual to confirm features and maintenance details.

How to find the right Kenmore part fast

Using the full model number is the key because Kenmore appliances were built by multiple manufacturers over the years, and parts vary by design.

• Match parts by model number: 10654606300 (not just “Kenmore side-by-side”)
• Use the part’s part ID when ordering to avoid look-alike substitutions
• Compare the part name to your symptom (ice, water, cooling, door closing)
• Check for color and door side differences on cosmetic parts (gaskets, bins)
• Confirm whether your refrigerator has a filter system and where it mounts (base grille vs. internal)

Popular replacement parts for model 10654606300

These are some of the most commonly replaced parts for this model family.

Symptom	Likely part area	Example part for this model
No ice or small cubes	Ice maker / water supply	Refrigerator ice maker 2198597
No water to dispenser or ice maker	Water inlet valve	Refrigerator inlet valve W10408179
Frost buildup, warm fridge	Defrost system	Refrigerator defrost bi-metal WPW10225581 and refrigerator heater WP2323198
Door not closing smoothly	Door cam / hinge hardware	Refrigerator door cam (black) WP2182179

Why it matters

Ordering by model number helps you get the correct OEM-style fit, which prevents leaks, poor cooling, and repeat repairs. It also saves time when troubleshooting systems like the ice maker and defrost circuit.

Quick tip before you order

If you are troubleshooting water or ice issues, replace the filter on schedule and verify household water supply first. Our how to replace the water filter in a Kenmore refrigerator guide helps you identify filter types and replacement steps.

Last updated: February 2026

Common Kenmore Elite refrigerator problems usually come down to cooling performance, moisture buildup, and ice and water issues. On Kenmore model 10654606300, we start with the basics in the 10654606300 owner's manual: correct temperature settings, clear air vents, clean door gaskets, and a simple control reset.

Most common symptoms and what they usually mean

• Refrigerator or freezer too warm: blocked air vents, heavy door opening, warm room, or a defrost/cooling airflow problem.
• Frost buildup or warming after a few days: defrost system trouble (heater, defrost thermostat, or control).
• Interior moisture or sweating: frequent door openings, humid room air, or poor door sealing.
• Ice maker not making ice: freezer temperature too warm, water supply issue, or ice maker failure.
• Water dispenser slow or no water: clogged filter housing, frozen/blocked water tube, or inlet valve issue.

Quick checks we recommend first (model 10654606300)

1. Verify set temperatures: freezer set point range is -5°F to 5°F; refrigerator range is 33°F to 41°F.
2. Wait 24 hours between adjustments so temperatures can stabilize.
3. Check airflow: remove packages blocking vents (poor circulation causes warm spots and moisture).
4. Clean sticky/dirty door gaskets; a poor seal drives moisture and temperature swings.
5. Reset digital controls (if equipped): turn the unit OFF, then ON.

Parts that commonly solve ice and water complaints

If the symptom points to a failed component, these are frequent fixes for this platform:

Symptom	Common part to check/replace	Example from this model’s parts
No ice or intermittent ice	Ice maker assembly	Refrigerator ice maker 2198597
No water to dispenser/ice maker	Water inlet valve	Refrigerator inlet valve W10408179
Water line frozen/leaking	Water tube	Refrigerator water tube 8201597

Why it matters

Most “Kenmore Elite not cooling” or “no ice” complaints are caused by airflow, settings, or a single failed part. Starting with temperature ranges, vent clearance, and gasket condition prevents unnecessary part replacement and helps the refrigerator recover faster after heavy use.

Last updated: February 2026

For Kenmore side-by-side refrigerator model 10654606300, the typical exterior size is about 35 inches wide, 68-5/8 inches tall (about 69-5/8 inches including hinges), and 30-1/2 inches deep (about 32-7/8 inches including handles). For the exact spec listing for your unit, confirm in the 10654606300 owner's manual.

How to measure your refrigerator (so the fit is correct)

Use a tape measure and record three numbers:

• Width: widest point of the cabinet (then re-check including handles)
• Height: floor to top of cabinet (then re-check including top hinges)
• Depth: front edge to back (then re-check including handles)
• Door swing clearance: measure how far doors need to open to clear nearby walls
• Ventilation space: plan for airflow space around the cabinet

Space and clearance guidelines we use for side-by-side installs

Your manual calls out ventilation and wall-clearance needs that affect the real-world footprint.

What you are planning for	Typical minimum to allow	Why it matters
Side and top ventilation	1/2 inch	Helps cooling efficiency and reduces compressor run time
Clearance next to a fixed wall	2 inches (each side, depending on model)	Allows doors to swing open fully
Back clearance (with ice maker)	Extra space for water line	Prevents kinked tubing and leaks

Why it matters

A side-by-side refrigerator that is even 1 inch too deep or too tall can block door swing, pinch the water line to the ice maker, or reduce ventilation. That can lead to warm temperatures, moisture buildup, and higher energy use.

Last updated: February 2026

Your Kenmore Elite refrigerator’s model number is printed on the model and serial number label, typically located on the inside wall of the fresh food (refrigerator) compartment. For Kenmore model 10654606300, record the full model and serial number exactly as shown for parts lookup and service.

Where to find the model number label

Check these common locations first (most likely at the top):

• Inside the refrigerator compartment on an interior side wall (most common)
• On the ceiling area inside the fresh food compartment
• Behind the crisper drawers on the back wall
• Inside the freezer compartment side wall (less common)
• On the cabinet frame just inside the door opening

For diagrams and the exact label location guidance for this unit, use the 10654606300 owner's manual.

What to write down (and why)

Write the information exactly as it appears on the label:

• Model number (for this page: 10654606300)
• Serial number (unique to your refrigerator)
• Purchase date (helpful for service and records)

Quick reference

Item on label	What it’s used for	Example format
Model number	Matching parts and diagrams	106.54606300 or 10654606300
Serial number	Identifying your exact unit	Letters and numbers
Purchase date	Service history and records	Month/day/year

Why it matters

Kenmore refrigerators often share similar styling across multiple model families. Using the exact model number ensures you get the correct Kenmore-compatible parts (such as an ice maker, water inlet valve, or door gasket) and the right troubleshooting steps.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10654606300, the model number is printed on the model and serial number label located on the inside wall of the refrigerator (fresh food) compartment. Use that label any time you order parts or schedule service.

Where to look (fast checklist)

• Open the refrigerator (fresh food) door, not the freezer door
• Look along the inside side wall of the compartment
• Check near the upper side wall first, then scan downward
• Look for a label that lists both Model and Serial
• Write the model number exactly as shown: 10654606300

What the label typically includes

Item on label	What it’s used for	Example
Model number	Matching parts and diagrams	10654606300
Serial number	Identifying production details	Varies
Purchase date (you fill in)	Your records and service calls	Varies

Why it matters

We use the model number to match the correct Kenmore parts for your exact configuration (ice maker, water system, door hardware, and internal shelving). Even small model differences can change which replacement part fits.

Helpful next steps

• Confirm the full model number in the 10654606300 owner's manual
• If you’re troubleshooting ice or water issues, the model number helps us match parts like the refrigerator inlet valve W10408179
• Keep a photo of the label on your phone for quick reference

Last updated: February 2026

Kenmore is a brand name, so replacement parts for your Kenmore 10654606300 side-by-side refrigerator are typically manufactured by major OEM suppliers (most commonly Whirlpool-family suppliers for many 106-prefix models) and then sold as Kenmore-compatible parts. The most reliable way to confirm the correct maker is to match the exact part number listed for your model in the owner's manual.

How to identify the true manufacturer (OEM) for your part

We recommend using the part number and the model’s parts list, not the logo on the refrigerator.

• Find the part in the model parts list for 10654606300
• Match the manufacturer part number (not just a generic description)
• Compare the part’s connector style, mounting points, and finish
• If multiple versions exist, match by revision notes and wiring harness type
• Use the model’s wiring diagram or parts diagram when troubleshooting

Examples of OEM-style parts used on this model

These are common replacement parts shown for Kenmore 10654606300; the OEM supplier may be Whirlpool or a Whirlpool-authorized manufacturer depending on the component.

What you’re replacing	Example part on this model	What it does
Ice maker assembly	Refrigerator ice maker 2198597	Cycles water fill and harvest to produce ice
Water inlet valve	Refrigerator inlet valve W10408179	Opens to send water to the ice maker and dispenser
Defrost heater	Refrigerator heater WP2323198	Melts frost off the evaporator during defrost
Defrost thermostat	Refrigerator defrost bi-metal WPW10225581	Monitors evaporator temperature to control defrost

Why it matters

Using the correct OEM-spec part helps prevent fit issues, leaks, poor ice production, and repeat failures. It also ensures the electrical ratings and food-contact materials match what the refrigerator was designed to use.

Last updated: February 2026