Craftsman 917288612 tractor gt6000 Parts

Craftsman model 917288612 (shown in the operator’s manual as 917.28861) was produced during the era when Craftsman updated many riding tractors to “low emission” engines and E10-compatible fuel systems; most units of this type were sold in the late 2000s through early 2010s. For the most accurate build or sale year, match the tractor’s product label details to the 917288612 operator’s manual.

We use the model number plus the product label information to narrow the exact year, because the same model family can be sold across multiple seasons.

• Look under the seat area and around the rear fender pan for the product label.
• Write down the serial number and any date code shown.
• Compare the label’s model format (917.28861 vs 917288612) to the manual listing.
• Check for emissions labeling language (often tied to a production window).
• If you are ordering parts, always use the full model number 917288612 to avoid mismatches.

The operator’s manual confirms the tractor configuration (26 HP class, 54-inch deck, electric start, automatic transmission) and identifies the model as 917.28861, which aligns to 917288612 on parts listings. It does not print a single “manufactured in YYYY” line, so the year is best confirmed from the product label.

The exact year affects parts fitment for common wear items like deck hardware, steering links, and electrical components. For example, if you are diagnosing a no-crank issue, the correct starter circuit parts (such as the lawn tractor starter solenoid 582042802) depend on the exact configuration used in that production run.

Last updated: February 2026

Craftsman uses engines from several manufacturers across its riding mowers and lawn tractors; the engine brand depends on the exact model and the engine model installed. For Craftsman model 917288612, the correct way to confirm the engine brand is to read the engine identification label and cross-check it in the 917288612 operator’s manual.

Use the engine’s ID label, not the tractor hood decal. The label lists the manufacturer and the engine model information you need for tune-up and repair parts.

Check these common label locations:

• On the blower housing or engine shroud
• Near the valve cover
• Near the starter motor
• Near the muffler or heat shield area

Record the information exactly as shown on the engine label:

• Engine manufacturer name
• Engine model number
• Spec number (common on Kohler)
• Type and code (common on Briggs & Stratton)
• Serial number

Many maintenance parts are engine-specific even when the tractor model number is the same.

If you are troubleshooting a click-no-crank condition, one common tractor electrical part to inspect is the lawn tractor starter solenoid 582042802 along with battery voltage, cable tightness, and ground connection.

Confirming the engine manufacturer first prevents ordering the wrong tune-up parts and speeds up troubleshooting for starting, fuel, and ignition problems.

Last updated: February 2026

A Craftsman “6.75” walk-behind mower does not have one universal model number; “6.75” is an engine power class used on many different mowers. For the Craftsman front-engine lawn tractor covered here, the model number is 917288612; verify your exact mower model on its ID label and in the 917288612 operator’s manual.

Use the mower’s product ID label (not the engine label) so you match the correct deck, drive system, and hardware.

• Walk-behind mowers: check the rear deck housing, near the wheels, or on the handle support
• Riding tractors: check under the seat, on the frame rail, or near the engine compartment
• Record the full model number exactly as printed (all digits)
• Record the serial number too; it helps confirm production variations
• Use the model number first when ordering blades, belts, pulleys, and steering parts

“6.75” identifies an engine power category, not the mower’s configuration. Two Craftsman mowers can share the same engine class but use different blade adapters, decks, and self-propel components.

For Craftsman tractor 917288612, use the tractor model number for all chassis and deck parts. For example, if you have a no-crank issue, the starting circuit often involves the solenoid; a common replacement is the lawn tractor starter solenoid 582042802.

Using the exact model number prevents ordering the wrong part when similar Craftsman units use different deck sizes, belt routing, or electrical connectors.

Last updated: February 2026

For the Craftsman riding tractor model 917288612, an engine replacement typically costs $260 to $1,800 installed. Total price depends on the replacement engine itself, local labor rates, and whether you replace related wear items (belts, wiring, fuel parts) at the same time.

• Engine cost: new, remanufactured, or used
• Labor time and shop rate: most riding mower swaps take about 5 to 8 hours
• Related parts: fuel lines, clamps, wiring repairs, battery cables
• Tune-up supplies: oil, filter, spark plug, air filter
• Transport: pickup and delivery fees if you do not haul the tractor

Many “bad engine” symptoms are actually starting or fuel issues. We check these first because they are faster and cheaper than an engine swap:

• Weak or dead battery
• Corroded battery terminals
• Loose or damaged wiring
• Faulty starter solenoid
• Stale fuel or restricted air flow

If the engine clicks but will not crank, a failed solenoid is a common fix; the lawn tractor starter solenoid 582042802 is the correct style of replacement part used on this tractor.

An engine swap only makes sense when the rest of the tractor is in good shape (deck, steering, transaxle). If multiple major systems need work, the total repair cost can exceed the tractor’s value.

For model-specific safety steps and service procedures, follow the 917288612 owner's manual.

Last updated: February 2026