Craftsman 917271554 lawn tractor Parts

Craftsman model 917271554 was made across a production run rather than a single model year; the exact build year is identified by the tractor’s serial number/date code on the model and serial tag (commonly found under the seat). Use the decoding steps in the owner's manual to match your unit to its manufacture date.

Check the model/serial tag first, then decode the serial number.

• Park on a level surface, set the parking brake, and remove the key.
• Lift the seat and look for the model and serial number label (often on the fender pan or frame under the seat).
• Confirm the model reads 917.271554 (sometimes printed with a dot).
• Write down the full serial number exactly as shown.
• Use the serial number format guidance in the owner's manual to determine the manufacture date.

The documentation for model 917.271554 describes this configuration:

The build year affects parts lookups and compatibility for wear items like blades, deck hardware, and electrical starting components. Once you have the serial number decoded, you can match the correct diagrams and order the right replacement parts for your Craftsman lawn tractor.

Last updated: February 2026

The model number for this Craftsman riding lawn tractor is 917.271554 (often written without the dot as 917271554). You’ll find it on the tractor’s model tag and it’s also printed on the cover of the owner's manual.

Check these common locations on Craftsman front-engine lawn tractors like model 917271554:

• Under the seat on the frame or fender pan
• On the rear fender area near the seat
• On the frame rail near the engine compartment
• Near the footrest area on the chassis
• On a sticker or metal plate labeled “Model No.”

You may see the same model shown in two formats. Both refer to the same tractor.

Using the exact model number ensures you get the right parts and diagrams for your tractor’s 42-inch mower deck, 6-speed transaxle setup, and related components. Even small model-number differences can change blades, belts, and deck hardware.

If you want a fast confirmation you’re on the right model, the mower deck parts list for 917271554 commonly includes items like:

• Husqvarna lawn tractor mulching blade, 21-in 532134149
• Molded ignition key 532140403
• Lawn tractor deflector shield 532130968

Last updated: February 2026

On a Craftsman push mower, the model number is on a sticker or metal tag attached to the mower deck or frame. We most often find it on the rear of the deck near the wheels, or on the deck close to the engine mounting area.

• Rear of the mower deck, near the left or right rear wheel
• Top of the deck near the engine (look around the engine base)
• Side of the deck near the discharge chute opening
• Handle bracket area where the handle bolts to the deck
• Under heavy grass buildup; wipe the deck clean to reveal the label

The identification label usually includes a model number and often a serial number.

On Craftsman riding tractors like model 917271554, the model and serial number location is shown in the 917271554 owner's manual. In the manual diagram, it is called out as “MODEL and SERIAL NUMBERS HERE” and is shown by the transaxle area.

We use the exact model number to match the correct parts diagrams and replacement parts; even one digit can change the deck size, blade type, belts, and hardware.

Last updated: February 2026