Kenmore 10657999700 side-by-side refrigerator Parts

Kenmore is a brand name, not a single manufacturer; Kenmore refrigerators have been built by multiple manufacturers over the years, including LG on some models. For your Kenmore side-by-side refrigerator model 10657999700, the 106 model prefix is commonly associated with Whirlpool-built Kenmore refrigerators, not LG.

How to tell who built your Kenmore refrigerator

We use the model number prefix (the first three digits) as the quickest identifier.

• Find the full model number on the rating label inside the fresh food compartment
• Look at the first three digits (the prefix)
• Match the prefix to the most common manufacturer family
• Use the parts list for your exact model to confirm compatible components
• Keep the model number handy when ordering parts like a water filter or inlet valve

Common Kenmore refrigerator prefixes (quick reference)

These prefixes are widely used across Kenmore refrigeration lines.

Kenmore model prefix	Common manufacturer family	What that means for parts
106	Whirlpool family	Whirlpool-style components and part numbering are typical
795	LG family	LG-style components and part numbering are typical
253	Frigidaire/Electrolux family	Frigidaire-style components and part numbering are typical

Why it matters

The manufacturer family affects which parts fit and how repairs are performed. For example, water filtration and ice maker components can vary by design; using the correct model family helps you choose the right replacement parts and follow the right service steps in the owner's manual.

Parts that commonly vary by manufacturer family

If you are troubleshooting water or ice issues on model 10657999700, these are common model-specific replacement categories:

• Refrigerator water filter (fit and cap style can differ)
• Refrigerator inlet valve (water flow and electrical connectors vary)
• Refrigerator ice maker (mounting and harness style vary)
• Door hardware and cams (door closing feel and alignment)

If you need a replacement water filter for this model, we list compatible options such as the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: February 2026

On the Kenmore side-by-side refrigerator model 10657999700, the model number is printed on the appliance’s identification label (the same label that lists the serial number). The quickest way to find it is to check inside the fresh food compartment around the door opening, then check the freezer side if you do not see it.

Most common label locations to check

We recommend checking these spots in order (they are the most common on Kenmore side-by-side units):

• Inside the refrigerator compartment on the side wall near the front
• On the ceiling of the fresh food compartment near the light housing
• Along the door jamb (the frame you see when the door is open)
• Inside the freezer compartment on a side wall near the front
• Behind the base grille (lower front kickplate) on some configurations

What the label looks like and what to write down

The ID label typically includes both a model number and a serial number. Use the model number to look up parts diagrams and the serial number to identify production details.

Item on label	What it’s used for	Example format
Model number	Correct parts list and diagrams	10657999700
Serial number	Manufacturing code and date info	Letters plus numbers (varies)

Why it matters

Using the exact model number (including every digit) prevents ordering the wrong refrigerator water filter, ice maker, door gasket, or electronic control. Even small model-number differences can change which parts fit.

Helpful tip for this model

Once you find the model number, keep it handy with your paperwork. For model-specific diagrams and care information, use the 10657999700 owner's manual.

Last updated: February 2026

The most common issues we see on Kenmore refrigerators like model 10657999700 are cooling problems, water leaks, ice maker or dispenser trouble, and unusual noises. These typically trace back to airflow restrictions, defrost-system faults, or water-supply components; the owner's manual troubleshooting section helps narrow it down fast.

Most common symptoms and what usually causes them

• Not cooling or weak cooling: dirty condenser coils, evaporator fan issues, heavy frost from a defrost problem
• Freezer cold but fresh food warm: blocked air vents, iced-up evaporator area, fan not moving air
• Water leaking or puddles: clogged defrost drain, loose water line, door not sealing well
• Ice maker not making ice: water supply issue, inlet valve problem, ice maker failure
• Noisy operation: normal compressor and fan sounds, items vibrating, water valve buzzing during ice maker fill

Quick checks we recommend first (before replacing parts)

1. Confirm controls are on and set correctly; avoid assuming the coldest setting cools faster.
2. After a new install or major temperature change, allow 24 hours for temperatures to stabilize.
3. Listen for the type of noise; buzzing during ice maker fill and sizzling/gurgling during defrost can be normal.
4. Check door closing and sealing; warm air leaks cause moisture, frost, and longer run times.
5. If water or ice is slow, verify the home shutoff valve is fully open and the water line is not kinked.

Parts that commonly solve these problems on model 10657999700

Problem area	Common fix	Example part on this model
Water dispenser or ice maker not filling	Replace a failing inlet valve	Refrigerator inlet valve W10408179
Ice production issues	Replace the ice maker assembly	Refrigerator ice maker WPW10190965
Frost buildup, warm temps	Check defrost heater and thermostat	Refrigerator heater WP2323198, refrigerator bi-metal thermostat WPW10225581
Bad taste, slow flow	Replace the water filter	Genuine Kenmore refrigerator water filter EDR3RXD1

Why it matters

Most “big” refrigerator failures start as small airflow, defrost, or water-supply problems. Catching them early helps protect food temperatures, reduces excessive run time, and prevents leaks that can damage flooring.

Last updated: February 2026

Your Kenmore side-by-side refrigerator model 10657999700 has a specific cubic-foot capacity listed in the product specifications section of the owner's manual. The most accurate confirmation is the model and serial rating label inside the fresh food compartment because it matches your exact configuration.

Fast ways to find the cubic-foot capacity

Use these checks in order; they are the quickest and most reliable for model 10657999700:

• Check the rating label inside the refrigerator section (often on a side wall or near the crisper area).
• Look in the specifications pages of the owner's manual.
• If the label is missing or unreadable, use the model number 10657999700 to match the correct spec sheet when ordering parts.
• If you are measuring for fit (cabinet opening), also confirm required clearance and door swing space in the manual.

Rating label vs. “measured space”: what you are actually getting

“Cubic feet” is the manufacturer’s stated capacity, not the same as the usable space after shelves, bins, and the ice maker are installed.

What you’re checking	What it tells you	Best use
Rating label capacity	Official total capacity (fresh food + freezer)	Comparing models, resale listings
Manual specifications	Official capacity plus key installation specs	Planning installation and clearances
Tape-measure estimate	Approximate usable volume	Storage planning only

Why it matters

Capacity affects how much food you can store, but it also impacts installation planning. For example, the manual calls out typical clearance needs (such as space at the sides/top and extra room behind for the water line if you have an ice maker), which can matter as much as cubic feet when fitting a side-by-side into a cabinet opening.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 10657999700, a “not cooling” problem is usually caused by a control set incorrectly (including OFF), blocked air vents that stop airflow between compartments, or a failure in the cooling system such as the evaporator fan, defrost system, or compressor. See the owner's manual for airflow and control details.

Quick checks we recommend first (no parts needed)

• Confirm the refrigerator has power and the interior lights turn on.
• Make sure the Refrigerator Control is not set to OFF (this model will not cool in OFF).
• Check that air vents are not blocked by food (boxes, soda, bread, etc.).
• Wait 24 hours after a control change before judging temperature results.
• Listen for normal operating sounds (fans and compressor can run longer on efficient models).
• Verify doors close fully and seals are making contact all the way around.

Airflow problems: the most common “sudden warm” cause

This model relies on air moving from the freezer to the refrigerator through vents. If vents are blocked, temperatures drift and the controls cannot regulate properly.

What to do

• Move items away from the top vent(s) in the refrigerator section.
• Keep packages away from the back wall vents (if your style has multiple vents).
• Avoid overpacking; leave space for air circulation.

When it points to a failed part

If controls are set correctly and vents are clear, these symptoms help narrow it down.

Symptom	Most likely area	Example part on this model page
Freezer cold, fridge warm	Airflow/evaporator fan issue	Refrigerator evaporator fan blade WP2169142
No ice and no water dispense	Water supply/inlet valve issue (not a cooling cause, but often noticed together)	Refrigerator inlet valve W10408179
Frost buildup, warming over days	Defrost system issue	Refrigerator heater WP2323198 or refrigerator bi-metal thermostat WPW10225581
Both sections warm, compressor not running	Start/cooling system issue	Refrigerator run capacitor WPW10662129

Why it matters

A side-by-side refrigerator cools the fresh food section by moving cold air from the freezer. Anything that stops airflow (blocked vents, fan problems, heavy frost from a defrost failure) can look like “the fridge quit,” even when some cooling is still happening.

Last updated: February 2026