Owner’s manual
Error Codes
How wide is a Kenmore side-by-side refrigerator?
A Kenmore side-by-side refrigerator is typically about 36 inches wide. For Kenmore model 10658999800, the owner's manual specifies a 36 inch (91.44 cm) minimum cabinet cut-out width for installation, which is the key width measurement to plan for.
Refrigerator width questions usually mean one of these. For installation planning, the cabinet opening matters most.
- Cabinet cut-out width: the opening your refrigerator slides into (most important)
- Refrigerator case width: the appliance body itself (can be slightly under the cut-out)
- Door swing clearance: extra side space so doors open fully
- Service clearance: room for airflow and water line routing (ice maker models)
Based on the installation guidance for this model:
| Measurement you plan for | What to use | Typical value for this model type |
|---|---|---|
| Minimum cabinet opening width | Cut-out width | 36 in (91.44 cm) |
| Side and top ventilation space | Clearance | 1/2 in (1.25 cm) each side and top |
| Clearance next to a fixed wall | Door swing space | 2 in (5.08 cm) minimum (varies by setup) |
If the refrigerator sits against an extended wall and you want full access to the crisper pans, the manual notes a wider opening may be recommended.
A side-by-side refrigerator that is “36 inches wide” often still needs more than 36 inches of total space once you include door swing, ventilation, and (if equipped) ice maker water line connections. Planning for the cut-out plus clearance helps prevent rubbing doors, poor airflow, and difficult service access.
- Measure the cabinet opening at the front and back (walls are not always square).
- Confirm you have the recommended 1/2-inch ventilation space on both sides and at the top.
- If the unit is next to a wall, plan for door swing clearance so shelves and bins can pull out.
- If you are replacing an older unit, compare the old cut-out width to the new one before moving it in.
- For exact installation requirements and diagrams, use the owner's manual.
You can also find replacement parts for Kenmore 10658999800 on the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
What is the ER if code on a Kenmore Elite?
The ER IF (or Er IF) code on a Kenmore Elite refrigerator means the ice fan is not working correctly. On Kenmore model 10658999800, that fan is responsible for moving cold air through the freezer and into the ice maker area; when airflow drops, ice production and temperatures can suffer. See the 10658999800 owner's manual for model-specific troubleshooting steps.
- Ice maker slows down or stops making ice
- Ice bin may be partially melted or clumped
- Freezer temperature may drift warmer than normal
- You may hear unusual fan noise (rubbing, buzzing) or no fan sound at all
- Frost buildup in the freezer can restrict airflow
- Power reset: Unplug the refrigerator for 2 minutes, then restore power.
- Check for airflow blockage: Make sure packages are not blocking vents in the freezer.
- Inspect for frost/ice: Heavy frost on the rear freezer panel often points to a defrost problem.
- Listen for the fan: With the freezer door switch held closed, you should typically hear the evaporator fan running.
- Confirm door sealing: A poor seal can cause excess frost and airflow issues.
If the code returns after basic checks, these are the most common repair paths.
| Symptom | Most likely cause | Part on this model page |
|---|---|---|
| No airflow sound, warm freezer | Evaporator fan motor failed | Refrigerator evaporator fan motor WP2315549 |
| Fan runs but hits ice/noisy | Ice buildup from defrost issue | Refrigerator defrost heater WP2323198 |
| Heavy frost returns quickly | Defrost control not cycling | Refrigerator electronic control 4388932 |
| Door not closing smoothly | Door cam worn, door stays ajar | Refrigerator door cam (black) WP2182179 |
The ice fan and evaporator airflow keep the freezer stable and deliver cold air to the ice maker area. When airflow is restricted, the refrigerator can run longer, temperatures fluctuate, and ice production becomes unreliable.
If you need to order replacement parts for Kenmore 10658999800, use the parts list for this model or search by model number on Sears PartsDirect.
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On a Kenmore side-by-side refrigerator like model 10658999800, the model number is printed on the appliance’s rating label. You will typically find that label inside the fresh food (refrigerator) compartment on a side wall or near the top, and it lists both the model and serial information.
- Open the refrigerator (fresh food) door and check the left and right interior walls
- Look near the ceiling of the compartment, behind or beside the light housing
- Check around the crisper drawer area, including the side walls just above the crispers
- If you do not see it in the refrigerator section, check the freezer compartment side wall
- Look for a label that includes “Model” and “Serial” fields
Most Kenmore rating labels are a white or silver sticker with small print. It usually includes:
- Model number (for example, 10658999800)
- Serial number
- Electrical ratings (volts/amps)
- Refrigerant information
| Item | What it tells you | What we use it for |
|---|---|---|
| Model number | The exact refrigerator design and parts breakdown | Matching the correct parts list and diagrams |
| Serial number | The unit’s production identifier | Dating the unit and confirming production details |
We use the model number to match the correct Kenmore parts for your refrigerator, such as the refrigerator inlet valve W10408179 or the refrigerator ice maker WPW10190965. Using the full model number prevents ordering a part that looks similar but does not fit.
For model-specific identification and general refrigerator information, use the owner's manual. If you are ordering parts beyond the most common items, you can also search by model number on Sears PartsDirect.
Last updated: February 2026
Where is the water filter on my Kenmore side-by-side refrigerator?
On Kenmore model 10658999800, the water filter is located in the base grille below the freezer compartment door. You access it from the front by pressing the eject button and pulling the filter straight out by the cap; the base grille stays in place. See the 10658999800 owner's manual.
- Open the refrigerator and freezer doors so you can clearly see the base grille area.
- Look for the filter in the base grille below the freezer door.
- Press the eject button.
- Pull the filter straight out by the filter cap.
- Expect a small amount of water to spill; keep a towel handy.
- Avoid twisting the cap while pulling; pull straight to prevent the cap from popping off.
| What you see | What it means | What to do |
|---|---|---|
| Filter cap at the grille | The cap is part of the filter assembly | Reuse the cap on the replacement filter |
| Eject button | Releases the filter from the housing | Press, then pull straight out |
| O-rings on the filter | Helps seal the water path | Check they are seated and not damaged |
- Flush water through the dispenser for several minutes to clear air from the lines.
- Reset the filter status light by pressing and holding the FILTER button for 3 seconds (the indicator changes back to “Good”).
- If you use reverse osmosis, low water pressure can be more noticeable with the filter installed; replacing a clogged filter often restores flow.
Knowing the filter location on your 10658999800 helps you restore water taste, improve dispenser flow, and prevent ice maker fill issues caused by a restricted filter.
If you need the filter cap replaced, we carry the matching cap as refrigerator water filter cap (black) WP2260518B, and you can also search by model on Sears PartsDirect.
Last updated: February 2026
