Kenmore 66513549N414 dishwasher Parts

Yes. You can still get replacement parts for Kenmore dishwashers, including model 66513549N414, because many common service parts (racks, pumps, valves, latches, seals) remain available and are identified by your exact model number. Use the parts diagrams and procedures in the 66513549N414 owner's manual to match the right component.

We recommend using your full model number (66513549N414) and matching the part by location and description, not just by appearance.

• Confirm the full model number from the tub frame label (inside the door area)
• Use the exploded-view diagram to identify the exact part name
• Match the part ID and description to your symptom (leak, no drain, poor cleaning)
• Replace mounting clips, seals, or grommets that come with the kit when included
• If your dishwasher has multiple versions, match by the original part ID on the diagram

These are examples of widely replaced parts that are available for this model:

Kenmore parts availability is strongest when you search by the exact model number and use the correct part ID. That prevents ordering a look-alike part that fits differently, leaks, or causes poor wash performance.

If you’re troubleshooting a display code or blinking pattern before ordering parts, use our Kenmore 665 model dishwasher error codes reference to narrow the failure to a specific system (drain, fill, heating, or door).

Last updated: February 2026

To identify your Kenmore dishwasher, we use the model and serial number from the rating label. On Kenmore model 66513549N414, the rating label is typically on the inside edge of the door area; it lists the model number and serial number you need for parts and service.

Check these common spots first:

• Inside the dishwasher door opening, along the left or right inner frame
• On the top or side edge of the door itself (visible when the door is open)
• Along the tub frame near the latch area
• On a label that also lists electrical and plumbing information

If the label is dirty or faded, wipe it gently with a damp cloth and read it under a bright light.

Record both numbers exactly as shown:

• Model number (example format: 66513549N414)
• Serial number (unique to your unit)
• Any suffix letters/numbers after the model number

The model number narrows your dishwasher to the correct design family, and the serial number helps match production changes. That prevents ordering a rack, pump, or control that looks right but does not fit.

Use this as a simple guide when you are shopping for replacement parts.

Once you confirm the model number matches 66513549N414:

• Use the 66513549N414 owner's manual to confirm features and operating details
• Use the 66513549N414 installation guide for mounting, electrical, and plumbing requirements
• If you are troubleshooting a display or blinking lights, use Kenmore 665 model dishwasher error codes

Last updated: February 2026

To reset your Kenmore dishwasher model 66513549N414, we cancel the current cycle and let the dishwasher drain, then restart a new cycle. On this model, pressing and holding START/RESUME for about 3 seconds performs the cancel/drain reset.

• Open the door slightly and wait for spraying to stop.
• Press and hold START/RESUME for 3 seconds to start CANCEL/DRAIN.
• Close the door within 3 seconds so the drain can begin.
• Let the dishwasher drain completely (typically about 2 minutes).
• Select a new cycle and options, then press START/RESUME to run.

For the exact button names and indicator behavior on your control panel, follow the steps in the 66513549N414 owner's manual.

These checks fix most no-start or won’t-reset situations after a power blip or interrupted cycle:

• Make sure the door is fully closed and latched; a loose latch prevents starting.
• If the control shows a drain step, keep the door closed until it finishes.
• Confirm the kitchen breaker is on (a tripped breaker can mimic a control problem).
• If you changed cycles mid-stream, verify the detergent dispenser is closed before restarting.

A proper cancel/drain reset clears the current cycle logic and safely removes water from the tub. That prevents standing water, improves wash results, and helps protect components like the drain pump and heating element.

If you’re seeing an error code, use Kenmore 665 model dishwasher error codes to match the code to the most likely cause.

Last updated: February 2026