Kenwood Speaker Parts — Browse All Models

Cleaning the speaker wire terminals on Kenwood speakers

• Turn off the amplifier or receiver that you have the speakers connected to.
• Disconnect all speaker wires from the backs of the speakers.
• Use a vacuum cleaner hose with a narrow hose attachment to vacuum dust and debris from all speaker wire terminals.
• Use a cotton swab moistened with isopropyl alcohol to thoroughly clean deposits from all speaker wire terminals.
• Allow the terminals to dry completely then reconnect all speaker wires.

Troubleshooting the stereo system when your Kenwood speakers won't play

• Check the output settings on your receiver's control panel first. Make sure that you have the correct speaker output selected. Adjust the audio output settings if necessary.
• Check to see if you have the headphones plugged into the headphone jack. Unplug the headphones to play the speakers if you find the headphones plugged into the headphone jack.
• Check the speaker wire connections. Make sure that speaker wires are plugged fully into the speaker jacks on the back of the receiver. Make sure that the speaker wires are securely connected to the speakers. Reconnect any loose wiring connection.
• Check speaker wires for damage. Repair or replace any damaged speaker wire.