Kenmore 79551019010 refrigerator Parts

Most Kenmore side-by-side refrigerators are about 33 inches to 36 inches wide; your Kenmore model 79551019010 is in that common range. For the exact cabinet width and required clearance for doors and airflow, use the dimensions listed in the 79551019010 owner's manual.

Typical width ranges (what you can expect)

Side-by-side refrigerators are usually built in a few standard widths. Here are the most common sizes we see:

• 32 3/4 in. to 33 in.: common “33-inch class” cabinets
• 35 3/4 in. to 36 in.: common “36-inch class” cabinets
• Around 30 in.: less common, typically smaller-capacity models

Quick reference table

Refrigerator type	Typical width	Notes
Side-by-side	33 to 36 in.	Most common Kenmore sizing
Counter-depth side-by-side	33 to 36 in.	Depth is reduced; width often similar
Compact/apartment	24 to 28 in.	Not typical for this model family

How to measure width the right way

To avoid ordering the wrong fit for a cutout, we recommend measuring two things:

• Cabinet width: measure the metal box across the front (not the doors)
• Door-to-door width: measure across the doors at the widest point
• Clearance space: allow room for door swing, handles, and ventilation
• Floor level: confirm the refrigerator is level; leveling affects door swing and perceived fit

Why it matters

Width is only part of “will it fit.” Door swing clearance and airflow space can add an extra inch or more to what you need, especially on a side-by-side with an ice and water dispenser.

Ordering fit-related parts

If you are replacing bins, drawers, or door hardware that affects usable space, order parts listed for model 79551019010 on this page, or search by model on Sears PartsDirect.

Last updated: February 2026

Kenmore Elite refrigerator capacity depends on the exact model number; Kenmore Elite units commonly range from about 20 to 30+ cubic feet. For your Kenmore 79551019010 side-by-side refrigerator, the most accurate capacity listing is in the 79551019010 owner's manual.

How to find the exact cubic feet for your model

We recommend using the model-specific specs section in the manual, because “Kenmore Elite” covers many refrigerator styles (side-by-side, French door, top freezer) with different sizes.

• Check the specifications or performance data sheet section
• Look for terms like total capacity, refrigerator capacity, and freezer capacity
• If the manual lists separate sections, add fresh food + freezer for total cubic feet
• Match the full model number exactly: 79551019010

Typical capacity ranges (so you can sanity-check the number)

These ranges help you confirm you are looking at the right spec once you find it.

Refrigerator type	Typical total capacity (cu. ft.)	Notes
Side-by-side	20 to 28	Often more freezer space than a top freezer
French door	22 to 30+	Usually larger fresh food section
Top freezer	14 to 22	Most compact of the three

Why it matters

Capacity affects how your refrigerator performs day to day. A larger cubic-foot rating usually means longer compressor run time after door openings or big grocery loads, which is normal behavior for modern refrigerators.

Related parts and maintenance that impact usable space

If shelves, bins, or drawers are missing or broken, you can restore storage capacity with model-correct replacements from the parts list for 79551019010, or search by model on Sears PartsDirect. Common examples include:

• Lg refrigerator door bin MAN61844601 for door storage
• Refrigerator crisper drawer AJP74434601 for produce storage
• Lg refrigerator crisper drawer AJP72994802 as an alternate crisper option used on this model

Last updated: February 2026

On Kenmore side-by-side refrigerator model 79551019010, the model and serial number are printed on an identification label located on the right-hand side of the refrigerator compartment (fresh food section). Use that label any time you’re ordering parts or checking warranty details in the 79551019010 owner's manual.

How to find the label quickly

• Open the refrigerator (fresh food) door, not the freezer door.
• Look along the right interior wall of the refrigerator compartment.
• Check near the front edge where the door gasket meets the cabinet.
• Use a flashlight; the print can be small.
• Write down both the model number and serial number exactly as shown.

What you’ll see on the label

Most labels include both identifiers plus electrical ratings. Here’s what to record:

Item to record	Why it matters
Model number (example: 79551019010)	Ensures you get the correct Kenmore parts list and diagrams
Serial number	Helps match production details for certain part variations
Date of purchase (your records)	Useful for warranty and service history

Why it matters

Kenmore refrigerators often have multiple versions that look similar. Using the exact model number from the ID label helps us match the correct parts, such as the refrigerator water inlet valve 5221JA2006D or the refrigerator electronic control board EBR64585301, and avoid ordering a part that does not fit.

If the label is hard to read

• Take a close-up photo and zoom in.
• Clean the label gently with a damp cloth (do not scrub).
• Copy characters carefully; zeros and the letter O can look similar.

You can order replacement parts for model 79551019010 from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Kenmore side-by-side refrigerator model 79551019010 is a full-size, 33-inch-class refrigerator. For the exact exterior dimensions (width, depth, and height) and clearance requirements for your specific unit, we list them in the 79551019010 owner's manual.

How to confirm the exact dimensions for your kitchen

Use these checks so you measure the same way the manufacturer does:

• Measure width at the widest point (often the doors or hinges)
• Measure height from floor to the top of the cabinet (and note hinge height if listed)
• Measure depth two ways: cabinet only, and to the front of the handles
• Add clearance for door swing and airflow (rear, sides, and top)
• If you have a water line, allow extra room so the line does not kink when the refrigerator is pushed back

Typical sizing you can expect (helpful planning ranges)

Most Kenmore 795-series side-by-side refrigerators fall into these common ranges; use this for rough planning, then confirm in the manual:

Measurement	Typical range	What can change it
Width	32 3/4 to 33 in.	hinges, door trim
Height	67 to 70 in.	leveling legs, hinges
Depth	30 to 34 in.	handles, door curvature

Why it matters

Correct sizing prevents installation problems like doors hitting walls, poor ventilation that reduces cooling performance, and water line pinching that can cause dispenser or ice maker issues.

Related setup detail from the manual

When connecting the water line, the manual calls out leaving extra tubing coiled so the refrigerator can be moved out from the wall for service without stressing the line.

You can also search by model number on Sears PartsDirect if you need additional parts or diagrams for 79551019010.

Last updated: February 2026

For Kenmore model 79551019010, replacing the ice maker is a remove-and-reinstall job: shut off power and water, remove the ice bin and ice maker cover to access the assembly, swap the ice maker, then reassemble. Use the 79551019010 owner's manual for the exact access details.

Before you start

• Unplug the refrigerator or switch off the breaker.
• Shut off the household water supply to the refrigerator.
• Empty the ice storage bin; discard old ice.
• Use gloves; freezer sheet metal edges can be sharp.
• Keep screws organized so the ice maker mounts correctly.

Access and replacement steps

1. Remove the ice storage bin (use both hands).
2. Lift and remove the ice shelf, then remove the ice maker cover.
3. Disconnect the ice maker wiring harness.
4. Remove the mounting screws, then lift the ice maker off its mounting points.
5. Install the new ice maker, reinstall screws, and reconnect wiring.
6. Reinstall the cover, shelf, and ice bin.
7. Turn water and power back on.

What to expect after installation

A newly installed ice maker typically needs 12 to 24 hours to begin making ice.

• Discard the first few batches of ice to clear the water line.
• Make sure nothing interferes with the feeler arm sweep.
• If the ice bin does not seat easily, rotate the auger drive slightly, then reinstall the bin.

Quick checks if it still will not make ice

Symptom	Likely cause	What to do
No ice after 24 hours	Water not reaching ice maker	Confirm shutoff valve is open; check for a kinked line
Small or hollow cubes	Low water flow	Replace a clogged filter; check the inlet valve
Bin will not slide in	Auger drive misaligned	Twist the auger drive slightly and try again

Why it matters

Most “new ice maker” problems come from missed steps: the bin not fully engaged on the auger drive, the water supply not fully on, or not allowing the full 12 to 24 hours for the first harvest cycle.

Last updated: February 2026